2-DOF contactless distributed manipulation using superposition of induced air flows

Many industries require contactless transport and positioning of delicate or clean objects such as silicon wafers, glass sheets, solar cell or flat foodstuffs. The authors have presented a new form of contactless distributed manipulation using induced air flow. Previous works concerned the evaluation of the maximal velocity of transported objects and one degree-of-freedom position control of objects. This paper introduces an analytic model of the velocity field of the induced air flow according to the spatial configuration of vertical air jets. Then two degrees-of-freedom position control is investigated by exploiting the linearity property of the model. Finally the model is validated under closed-loop control and the performances of the position control are evaluated.

[1]  T. N. Stevenson,et al.  Fluid Mechanics , 2021, Nature.

[2]  Vincent H. Chu,et al.  Turbulent Jets and Plumes: A Lagrangian Approach , 2003 .

[3]  Hyungpil Moon,et al.  Distributed Manipulation of Flat Objects With Two Airflow Sinks , 2006, IEEE Transactions on Robotics.

[4]  Hyungpil Moon,et al.  Generation of quadratic potential force fields from flow fields for distributed manipulation , 2006, IEEE Transactions on Robotics.

[5]  Jonathan E. Luntz,et al.  Superposition Methods for Distributed Manipulation Using Quadratic Potential Force Fields , 2006, IEEE Transactions on Robotics.

[6]  Guillaume J. Laurent,et al.  A New Aerodynamic-Traction Principle for Handling Products on an Air Cushion , 2011, IEEE Transactions on Robotics.

[7]  Jean-François Manceau,et al.  Design and fabrication of a new two-dimensional pneumatic micro-conveyor , 2010 .

[8]  David Goldberg,et al.  MOTION CONTROL OF PLANAR OBJECTS USING LARGE-AREA ARRAYS OF MEMS-LIKE DISTRIBUTED MANIPULATORS , 2000 .

[9]  Harry E. Stephanou,et al.  Distributed control system for an active surface device , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[10]  G. N. Abramovich The Theory of Turbulent Jets , 2003 .

[11]  S. J. Miles,et al.  High-speed conveyor junction based on an air-jet floatation technique , 2004 .

[12]  H. Fujita,et al.  Design, fabrication, and control of MEMS-based actuator arrays for air-flow distributed micromanipulation , 2006, Journal of Microelectromechanical Systems.

[13]  R. H. Munnig Schmidt,et al.  Planar wafer transport and positioning on an air film using a viscous traction principle , 2009 .

[14]  Andrew A. Berlin,et al.  AirJet paper mover: an example of mesoscale MEMS , 2000, SPIE MOEMS-MEMS.

[15]  Hyungpil Moon,et al.  Distributed manipulation with passive air flow , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[16]  Guillaume J. Laurent,et al.  A new contactless conveyor system for handling clean and delicate products using induced air flows , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.