Biomedical production of implants by additive electro-chemical and physical processes
暂无分享,去创建一个
J. Ciurana | M. Leu | K. Rajurkar | J. Silva | J. Kruth | G. Levy | P. Bártolo | A. Malshe | M. Mitsuishi
[1] S. Agarwal,et al. Use of electrospinning technique for biomedical applications , 2008 .
[2] J. Cesarano,et al. ROBOCASTING PROVIDES MOLDLESS FABRICATION FROM SLURRY DEPOSITION , 1998 .
[3] K. Jurczyk,et al. Synthesis and characterization of titanium-45S5 Bioglass nanocomposites , 2011 .
[4] D. Hutmacher,et al. The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth. , 2009, Biomaterials.
[5] Q. Meng,et al. A review of shape memory polymer composites and blends , 2009 .
[6] K. Leong,et al. Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. , 2003, Biomaterials.
[7] S. Badylak,et al. Extracellular matrix as a biological scaffold material: Structure and function. , 2009, Acta biomaterialia.
[8] N. Kotov,et al. Three-dimensional cell culture matrices: state of the art. , 2008, Tissue engineering. Part B, Reviews.
[9] Joseph Jagur-Grodzinski,et al. Polymers for tissue engineering, medical devices, and regenerative medicine. Concise general review of recent studies , 2006 .
[10] R Z LeGeros,et al. Biodegradation and bioresorption of calcium phosphate ceramics. , 1993, Clinical materials.
[11] Eduardo Saiz,et al. Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration. , 2011, Acta biomaterialia.
[12] D. Hukins,et al. Effect of sterilisation by gamma irradiation on the ability of polycaprolactone (PCL) to act as a scaffold material. , 2009, Medical engineering & physics.
[13] G Pradal,et al. Cellular mechanisms of calcium phosphate ceramic degradation. , 1999, Histology and histopathology.
[14] T. Kissel,et al. Tetracycline-HCl-loaded poly(DL-lactide-co-glycolide) microspheres prepared by a spray drying technique: influence of gamma-irradiation on radical formation and polymer degradation. , 1999, Journal of controlled release : official journal of the Controlled Release Society.
[15] Lorenzo Moroni,et al. Polymer hollow fiber three-dimensional matrices with controllable cavity and shell thickness. , 2006, Biomaterials.
[16] Paulo Jorge Da Silva bartolo,et al. Advanced Processes to Fabricate Scaffolds for Tissue Engineering , 2008 .
[17] Chikara Ohtsuki,et al. Biological evaluation of an apatite-mullite glass-ceramic produced via selective laser sintering. , 2007, Acta biomaterialia.
[18] Michele Germani,et al. Direct fabrication through electron beam melting technology of custom cranial implants designed in a PHANToM-based haptic environment , 2009 .
[19] S. Ramakrishna,et al. A review on electrospinning design and nanofibre assemblies , 2006, Nanotechnology.
[20] Joseph Cesarano,et al. Colloidal inks for directed assembly of 3-D periodic structures , 2002 .
[21] Takashi Nakamura,et al. Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments. , 2011, Acta biomaterialia.
[22] R. van Noort. The future of dental devices is digital. , 2012, Dental materials : official publication of the Academy of Dental Materials.
[23] Bradley R Ringeisen,et al. Jet‐based methods to print living cells , 2006, Biotechnology journal.
[24] M. Leu,et al. Fabrication of 13-93 bioactive glass scaffolds for bone tissue engineering using indirect selective laser sintering , 2011, Biofabrication.
[25] H. M. Kim,et al. Preparation of bioactive Ti and its alloys via simple chemical surface treatment. , 1996, Journal of biomedical materials research.
[26] A. Kneissl,et al. Generation, development and degradation of the intrinsic two-way shape memory effect in different alloy systems , 2002 .
[27] David J. Wood,et al. Processing and Characterization of Apatite-Wollastonite Porous Scaffolds for Bone Tissue Engineering , 2007 .
[28] David H. Kohn,et al. Metals in medical applications , 1998 .
[29] D. Kemmoku,et al. Use of BioCAD in the development of a growth compliant prosthetic device for cranioplasty of growing patients , 2009 .
[30] Elena P Ivanova,et al. Plasma-assisted surface modification of organic biopolymers to prevent bacterial attachment. , 2011, Acta biomaterialia.
[31] Federica Chiellini,et al. Polycaprolactone Scaffolds Fabricated via Bioextrusion for Tissue Engineering Applications , 2009, International journal of biomaterials.
[32] M. von Walter,et al. Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming. , 2006, Biomaterials.
[33] Delbert E. Day,et al. Freeze extrusion fabrication of 13–93 bioactive glass scaffolds for bone repair , 2011, Journal of materials science. Materials in medicine.
[34] J. Halloran,et al. Freeform fabrication of ceramics , 1999 .
[35] M. Elahinia,et al. Manufacturing and processing of NiTi implants: A review , 2012 .
[36] J. Davies,et al. Optimizing the sterilization of PLGA scaffolds for use in tissue engineering. , 2001, Biomaterials.
[37] Juan Pou,et al. Three-dimensional laser-assisted processing of bioceramics , 2010 .
[38] T. Xie. Recent advances in polymer shape memory , 2011 .
[39] Jan Feijen,et al. Designed biodegradable hydrogel structures prepared by stereolithography using poly(ethylene glycol)/poly(D,L-lactide)-based resins. , 2010, Journal of controlled release : official journal of the Controlled Release Society.
[40] O. Harrysson,et al. Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology , 2008 .
[41] Melissa L Mather,et al. Hydrogels in regenerative medicine: towards understanding structure-function relationships. , 2010, Regenerative medicine.
[42] M. Kamitakahara. Chikara Ohtsuki and Toshiki Miyazaki Phosphate in Physiological Condition Review Paper : Behavior of Ceramic Biomaterials Derived from Tricalcium , 2008 .
[43] Jan Bültmann,et al. Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM) , 2011 .
[44] Sakae Saito,et al. A new fabrication process of TiNi shape memory wire , 1993 .
[45] Dietmar W. Hutmacher,et al. Design, Fabrication and Physical Characterization of Scaffolds Made from Biodegradable Synthetic Polymers in combination with RP Systems based on Melt Extrusion , 2008 .
[46] S. Shabalovskaya,et al. Mechanical properties and shape memory of porous nitinol , 1994 .
[47] Lyndon F Cooper,et al. The effects of implant surface nanoscale features on osteoblast-specific gene expression. , 2009, Biomaterials.
[48] Boris N. Chichkov,et al. Photonic and Biomedical Applications of the Two-Photon Polymerization Technique , 2011 .
[49] C. M. Agrawal,et al. Effects of fluid flow on the in vitro degradation kinetics of biodegradable scaffolds for tissue engineering. , 2000, Biomaterials.
[50] Ming-Chuan Leu,et al. Porous and strong bioactive glass (13–93) scaffolds fabricated by freeze extrusion technique , 2011 .
[51] Scott J. Hollister,et al. Computational Design, Freeform Fabrication and Testing of Nylon-6 Tissue Engineering Scaffolds , 2002 .
[52] David W. Rosen,et al. Direct Digital Manufacturing , 2010 .
[53] W. Huang,et al. Stimulus-responsive shape memory materials: A review , 2012 .
[54] L G Griffith,et al. Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels. , 1998, Annals of surgery.
[55] Dietmar W. Hutmacher,et al. Comparison of the degradation of polycaprolactone and polycaprolactone–(β‐tricalcium phosphate) scaffolds in alkaline medium , 2007 .
[56] Vladimir Mironov,et al. Organ printing: computer-aided jet-based 3D tissue engineering. , 2003, Trends in biotechnology.
[57] P. Calvert,et al. Trabecular scaffolds created using micro CT guided fused deposition modeling. , 2008, Materials science & engineering. C, Materials for biological applications.
[58] Joel W. Barlow,et al. Selective Laser Sintering of Bioceramic Materials for Implants , 1993 .
[59] P. Chua,et al. Plasma-surface modification of biomaterials , 2002 .
[60] Dong-Yol Yang,et al. Contour offset algorithm for precise patterning in two-photon polymerization , 2005 .
[61] Dong-Woo Cho,et al. Development of nano- and microscale composite 3D scaffolds using PPF/DEF-HA and micro-stereolithography , 2009 .
[62] David J Mooney,et al. Cell instructive polymers. , 2006, Advances in biochemical engineering/biotechnology.
[63] Kim Ragaert,et al. Production & evaluation of PCL scaffolds for tissue engineered heart valves , 2011 .
[64] R. Hague,et al. Laser sintering of polyamides and other polymers , 2012 .
[65] B Vamsi Krishna,et al. Fabrication of porous NiTi shape memory alloy structures using laser engineered net shaping. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.
[66] Ryan B. Wicker,et al. Stereolithography of Three-Dimensional Bioactive Poly(Ethylene Glycol) Constructs with Encapsulated Cells , 2006, Annals of Biomedical Engineering.
[67] L. Silvio,et al. Porosity variation in hydroxyapatite and osteoblast morphology: a scanning electron microscopy study , 2004, Journal of microscopy.
[68] Ryan Wicker,et al. Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds. , 2010, Acta biomaterialia.
[69] K. S. Siow,et al. Plasma Methods for the Generation of Chemically Reactive Surfaces for Biomolecule Immobilization and Cell Colonization ‐ A Review , 2006 .
[70] 张哉根,et al. Leu-M , 1991 .
[71] Hideki Kyogoku,et al. Laser Melting of Ti-Ni Shape Memory Alloy 668 , 2003 .
[72] Dong-Yol Yang,et al. Recent developments in the use of two‐photon polymerization in precise 2D and 3D microfabrications , 2006 .
[73] Krishna C. R. Kolan,et al. Selective laser sintering of 13-93 bioactive glass , 2011 .
[74] M. Gu,et al. Two-photon polymerisation for three-dimensional micro-fabrication , 2006 .
[75] Neil Morgan,et al. Medical shape memory alloy applications—the market and its products , 2004 .
[76] A.C.W. Lau,et al. Precision extruding deposition and characterization of cellular poly‐ε‐caprolactone tissue scaffolds , 2004 .
[77] A Lode,et al. Calcium phosphate bone cements, functionalized with VEGF: release kinetics and biological activity. , 2007, Journal of biomedical materials research. Part A.
[78] Ivan P. Parkin,et al. Porous biocompatible implants and tissue scaffolds synthesized by selective laser sintering from Ti and NiTi , 2008 .
[79] Igor Smurov,et al. Surface Morphology in Selective Laser Melting of Metal Powders , 2011 .
[80] Carlos M Mery,et al. Biomaterials: a primer for surgeons. , 2006, Seminars in pediatric surgery.
[81] Palo Alto,et al. Definitions in Biomaterials, Progress in Biomedical Engineering, Vol. 4 , 1988 .
[82] M. Baumann,et al. Hydroxyapatite accelerates differentiation and suppresses growth of MC3T3-E1 osteoblasts. , 2003, Journal of biomedical materials research. Part A.
[83] W. Huang. On the selection of shape memory alloys for actuators , 2002 .
[84] Ming-Chuan Leu,et al. EFFECT OF PARTICLE SIZE, BINDER CONTENT AND HEAT TREATMENT ON MECHANICAL PROPERTIES OF 13-93 BIOACTIVE GLASS SCAFFOLDS , 2011 .
[85] Dong-Woo Cho,et al. Development of a bone scaffold using HA nanopowder and micro-stereolithography technology , 2007 .
[86] Richard A Black,et al. Effects of sterilisation method on surface topography and in-vitro cell behaviour of electrostatically spun scaffolds. , 2007, Biomaterials.
[87] Buddy D Ratner,et al. Biomaterials: where we have been and where we are going. , 2004, Annual review of biomedical engineering.
[88] Yunzhi Yang,et al. A review on calcium phosphate coatings produced using a sputtering process--an alternative to plasma spraying. , 2005, Biomaterials.
[89] M. Kotaki,et al. A review on polymer nanofibers by electrospinning and their applications in nanocomposites , 2003 .
[90] Jean-Pierre Kruth,et al. Direct Digital Manufacturing of Complex Dental Prostheses , 2008 .
[91] Buddy D. Ratner,et al. Biomaterials Science: An Introduction to Materials in Medicine , 1996 .
[92] B D Boyan,et al. Role of material surfaces in regulating bone and cartilage cell response. , 1996, Biomaterials.
[93] Yves Bellouard,et al. Shape memory alloys for microsystems: A review from a material research perspective , 2008 .
[94] C. R. Howlett,et al. Early bone formation around calcium-ion-implanted titanium inserted into rat tibia. , 1999, Journal of biomedical materials research.
[95] I. Denry,et al. State of the art of zirconia for dental applications. , 2008, Dental materials : official publication of the Academy of Dental Materials.
[96] Igor Shishkovsky,et al. Porous titanium and nitinol implants synthesized by SHS/SLS: Microstructural and histomorphological analyses of tissue reactions , 2010 .
[97] Vladimir Mironov,et al. Organ printing: tissue spheroids as building blocks. , 2009, Biomaterials.
[98] P. M. Gronet,et al. Preformed acrylic cranial implants using fused deposition modeling: a clinical report. , 2003, The Journal of prosthetic dentistry.
[99] Richard M Day,et al. Bioactive glass stimulates the secretion of angiogenic growth factors and angiogenesis in vitro. , 2005, Tissue engineering.
[100] Jiawei Wang,et al. Proliferation and differentiation of osteoblast-like MC3T3-E1 cells on biomimetically and electrolytically deposited calcium phosphate coatings. , 2009, Journal of biomedical materials research. Part A.
[101] Antonio Carrassi,et al. Bacterial colonization of zirconia ceramic surfaces: an in vitro and in vivo study. , 2002, The International journal of oral & maxillofacial implants.
[102] C. V. van Blitterswijk,et al. Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique. , 2004, Biomaterials.
[103] David G Simpson,et al. Nanofiber technology: designing the next generation of tissue engineering scaffolds. , 2007, Advanced drug delivery reviews.
[104] M. Leu,et al. In Vivo Evaluation of 13‐93 Bioactive Glass Scaffolds Made by Selective Laser Sintering (SLS) , 2012 .
[105] L. Yahia,et al. Medical applications of shape memory polymers , 2007, Biomedical materials.
[106] Young-Hag Koh,et al. Fabrication of poly(ε-caprolactone)/hydroxyapatite scaffold using rapid direct deposition , 2006 .
[107] J. Lewis. Colloidal Processing of Ceramics , 2004 .
[108] J. Cesarano,et al. Direct Ink Writing of Three‐Dimensional Ceramic Structures , 2006 .
[109] T. Goswami,et al. Knee implants – Review of models and biomechanics , 2009 .
[110] Xiaofeng Chen,et al. Biocompatibility and osteogenesis of biomimetic Bioglass-Collagen-Phosphatidylserine composite scaffolds for bone tissue engineering. , 2011, Biomaterials.
[111] Stephen F Badylak,et al. An overview of tissue and whole organ decellularization processes. , 2011, Biomaterials.
[112] J M García-Aznar,et al. On scaffold designing for bone regeneration: A computational multiscale approach. , 2009, Acta biomaterialia.
[113] Junying Chen,et al. Plasma-surface modification of biomaterials , 2002 .
[114] Amit Bandyopadhyay,et al. Application of Laser Engineered Net Shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants , 2009, Journal of materials science. Materials in medicine.
[115] Seeram Ramakrishna,et al. Electrospun Nanofibers: Solving Global Issues , 2006 .
[116] V. Mironov,et al. Designer ‘blueprint’ for vascular trees: morphology evolution of vascular tissue constructs , 2009 .
[117] J. Kruth,et al. Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures , 2011 .
[118] M. Meyers,et al. Biomedical applications of titanium and its alloys , 2008 .
[119] Jong-Chul Park,et al. Investigation on biodegradable PLGA scaffold with various pore size structure for skin tissue engineering , 2007 .
[120] K. Shakesheff,et al. Polymer carriers for drug delivery in tissue engineering. , 2007, Advanced drug delivery reviews.
[121] Jeroen Rouwkema,et al. Vascularization in tissue engineering. , 2008, Trends in biotechnology.
[122] L. Gibson,et al. The effect of pore size on cell adhesion in collagen-GAG scaffolds. , 2005, Biomaterials.
[123] Dietmar Werner Hutmacher,et al. State of the art and future directions of scaffold‐based bone engineering from a biomaterials perspective , 2007, Journal of tissue engineering and regenerative medicine.
[124] Joaquim Ciurana,et al. BioCell Printing: Integrated automated assembly system for tissue engineering constructs , 2011 .
[125] Larry L. Hench,et al. An Introduction to Bioceramics , 2013 .
[126] Geoffrey R. Mitchell,et al. Stereo‐thermal‐lithography: a new principle for rapid prototyping , 2003 .
[127] Fritz Klocke,et al. Coalescence Behaviour of Two Metallic Particles as Base Mechanism of Selective Laser Sintering , 2003 .
[128] Paulo Jorge Da Silva bartolo,et al. Photo-curing modelling: direct irradiation , 2007 .
[129] Chee Kai Chua,et al. Biomanufacturing for tissue engineering: Present and future trends , 2009 .
[130] K W Dalgarno,et al. Indirect selective laser sintering of apatite—wollostonite glass—ceramic , 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[131] Ning Liu,et al. Development of highly porous titanium scaffolds by selective laser melting , 2010 .
[132] G. Goch,et al. The Design and Manufacture of Biomedical Surfaces , 2007 .
[133] E. Lenz,et al. Computer simulation of stereolithographic curing reactions: phenomenological versus mechanistic approaches , 2006 .
[134] Thomas Imwinkelried,et al. Mechanical properties of open-pore titanium foam. , 2007, Journal of biomedical materials research. Part A.
[135] K-Y Lee,et al. Ceramic bioactivity: progresses, challenges and perspectives , 2006, Biomedical materials.
[136] H. Ohgushi,et al. BMP-induced osteogenesis on the surface of hydroxyapatite with geometrically feasible and nonfeasible structures: topology of osteogenesis. , 1998, Journal of biomedical materials research.
[137] Silvia Licoccia,et al. Fabrication of bioactive glass-ceramic foams mimicking human bone portions for regenerative medicine. , 2008, Acta biomaterialia.
[138] K A Gross,et al. Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: a review. , 2001, Journal of biomedical materials research.
[139] Richard van Noort,et al. The future of dental devices is digital. , 2012 .
[140] Radovan Kovacevic,et al. The design and production of Ti-6Al-4V ELI customized dental implants , 2008 .
[141] L G Griffith,et al. Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition. , 2001, Tissue engineering.
[142] A. Vaccaro,et al. The use of bioabsorbable implants in the spine. , 2003, The spine journal : official journal of the North American Spine Society.
[143] Christopher J. Sutcliffe,et al. Selective laser melting of high aspect ratio 3D nickel–titanium structures two way trained for MEMS applications , 2008 .
[144] Xiabin Jing,et al. Biodegradable synthetic polymers: Preparation, functionalization and biomedical application , 2012 .
[145] S. E. Feinberg,et al. Hydroxyapatite implants with designed internal architecture , 2001, Journal of materials science. Materials in medicine.
[146] Liang Hao,et al. Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development , 2009 .
[147] Radovan Kovacevic,et al. Evaluation of titanium alloy fabricated using electron beam melting system for dental applications , 2011 .
[148] Min Wang,et al. Selective laser sintering of porous tissue engineering scaffolds from poly(l-lactide)/carbonated hydroxyapatite nanocomposite microspheres , 2008, Journal of materials science. Materials in medicine.
[149] Chad Johnson,et al. The effect of scaffold degradation rate on three-dimensional cell growth and angiogenesis. , 2004, Biomaterials.
[150] P. Bártolo,et al. Effect of process parameters on the morphological and mechanical properties of 3D Bioextruded poly(ε‐caprolactone) scaffolds , 2012 .
[151] D. Schüler,et al. Synthesis and Characterization , 2009 .
[152] W. Yeong,et al. Engineering functionally graded tissue engineering scaffolds. , 2008, Journal of the mechanical behavior of biomedical materials.
[153] Tien-Min G. Chu,et al. CT-generated porous hydroxyapatite orbital floor prosthesis as a prototype bioimplant. , 1997, AJNR. American journal of neuroradiology.
[154] Regina Mericske-Stern,et al. [Rehabilitation of an abraded occlusion with Procera-ZrO2 all-ceramic crowns. A case report]. , 2006, Schweizer Monatsschrift fur Zahnmedizin = Revue mensuelle suisse d'odonto-stomatologie = Rivista mensile svizzera di odontologia e stomatologia.
[155] Ryan B. Wicker,et al. Practical Use of Hydrogels in Stereolithography for Tissue Engineering Applications , 2011 .
[156] Bhupender S. Gupta,et al. Co‐axial Electrospinning for Nanofiber Structures: Preparation and Applications , 2008 .
[157] A. Khademhosseini,et al. Hydrogels in Regenerative Medicine , 2009, Advanced materials.
[158] Federica Chiellini,et al. Evaluation of in vitro degradation of PCL scaffolds fabricated via BioExtrusion – Part 2: Influence of pore size and geometry , 2011 .
[159] Aldo R Boccaccini,et al. Effect of bioactive glasses on angiogenesis: a review of in vitro and in vivo evidences. , 2010, Tissue engineering. Part B, Reviews.
[160] Christopher J. Sutcliffe,et al. Gas flow effects on selective laser melting (SLM) manufacturing performance , 2012 .
[161] Xingdong Zhang,et al. Gene expressions of Collagen type I, ALP and BMP-4 in osteo-inductive BCP implants show similar pattern to that of natural healing bones , 2009 .
[162] P. Bártolo,et al. Additive manufacturing of tissues and organs , 2012 .
[163] Michael T. Wilson,et al. Antibacterial activity of particulate bioglass against supra- and subgingival bacteria. , 2001, Biomaterials.
[164] Kenneth W. Dalgarno,et al. Indirect selective laser sintering of apatite-wollostonite , 2008 .
[165] David W. Rosen,et al. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .
[166] Benjamin Grosser,et al. Customization of Load‐Bearing Hydroxyapatite Lattice Scaffolds , 2005 .
[167] Levi A. Gheber,et al. Microgel electrospinning: A novel tool for the fabrication of nanocomposite fibers , 2009 .
[168] P. Bertrand,et al. Manufacture of Co-Cr dental crowns and bridges by selective laser Melting technology , 2011 .
[169] Federica Chiellini,et al. Dual-Scale Polymeric Constructs as Scaffolds for Tissue Engineering , 2011, Materials.
[170] Mahmoud Ahmadian,et al. Design and evaluation of basic standard encryption algorithm modules using nanosized complementary metal–oxide–semiconductor–molecular circuits , 2006 .
[171] G. W. Hastings,et al. Book reviewDefinitions in Biomaterials: Progress in Biomedical Engineering 4, Editor: D.F. Williams. Elsevier, Amsterdam, 1987, pp viii + 72, US $63.50 , 1989 .
[172] Larry L. Hench,et al. Bioceramics: From Concept to Clinic , 1991 .
[173] Annie M Jones,et al. Hydrogel dressings in the management of a variety of wound types: A review , 2005 .
[174] Liang Hao,et al. Customised Implants for Bone Replacement and Growth , 2008 .
[175] Seung Jin Lee,et al. Electrospinning of polysaccharides for regenerative medicine. , 2009, Advanced drug delivery reviews.
[176] D. Cho,et al. Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres. , 2011, Biomaterials.
[177] Ioannis S. Chronakis,et al. Novel nanocomposites and nanoceramics based on polymer nanofibers using electrospinning process—A review , 2005 .
[178] Murray Eden,et al. Contemporary Biomaterials: Material and Host Response, Clinical Applications, New Technology and Legal Aspects , 1984 .
[179] Stephen F Badylak,et al. Decellularization of tissues and organs. , 2006, Biomaterials.
[180] Ignace Naert,et al. Rapid manufacturing of dental prostheses by means of selective laser sintering/melting , 2005 .
[181] J. Kruth,et al. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts , 2006 .
[182] Torsten Blunk,et al. Does UV irradiation affect polymer properties relevant to tissue engineering , 2001 .
[183] D. Puleo,et al. A technique to immobilize bioactive proteins, including bone morphogenetic protein-4 (BMP-4), on titanium alloy. , 2002, Biomaterials.
[184] K W Dalgarno,et al. Indirect selective laser sintering of an apatite-mullite glass-ceramic for potential use in bone replacement applications , 2004, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[185] Pierre Hardouin,et al. Quantitative kinetic analysis of gene expression during human osteoblastic adhesion on orthopaedic materials. , 2006, Biomaterials.
[186] Antonios G Mikos,et al. In vitro degradation of porous poly(propylene fumarate)/poly(DL-lactic-co-glycolic acid) composite scaffolds. , 2005, Biomaterials.
[187] Yongnian Yan,et al. Organism manufacturing engineering based on rapid prototyping principles , 2005 .
[188] S J Bryant,et al. The effects of scaffold thickness on tissue engineered cartilage in photocrosslinked poly(ethylene oxide) hydrogels. , 2001, Biomaterials.
[189] T. Boland,et al. Inkjet printing of viable mammalian cells. , 2005, Biomaterials.
[190] Colleen L Flanagan,et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.
[191] Geoffrey R. Mitchell,et al. The potential of electrospinning in rapid manufacturing processes , 2011 .
[192] Dietmar Werner Hutmacher,et al. Composite electrospun scaffolds for engineering tubular bone grafts. , 2009, Tissue engineering. Part A.
[193] S. Ramakrishna,et al. Biomedical applications of polymer-composite materials: a review , 2001 .
[194] S. Hollister,et al. Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. , 2002, Biomaterials.
[195] Y.-M. Huang,et al. Fundamental study and theoretical analysis in a constrained-surface stereolithography system , 2004 .
[196] D. Loeckx,et al. The combined use of micro-CT imaging, in-situ loading and non-rigid image registration for 3D experimental local strain mapping on porous bone tissue engineering scaffolds under compressive loading , 2010 .
[197] Chee Kai Chua,et al. Editorial: Celebrating the 70th Anniversary of Professor Yongnian Yan: A life dedicated to science and technology , 2008 .
[198] Sundararajan V Madihally,et al. Cell colonization in degradable 3D porous matrices , 2008, Cell adhesion & migration.
[199] H. Meier,et al. Selective Laser Melting of NiTi shape memory components , 2009 .
[200] Min Wang,et al. Developing bioactive composite materials for tissue replacement. , 2003, Biomaterials.
[201] Jui-Sheng Sun,et al. Degradation behaviour of a new bioceramic: Ca2P2O7 with addition of Na4P2O7.10H2O. , 1997, Biomaterials.
[202] P. Tengvall,et al. In vivo/ex vivo cellular interactions with titanium and copper , 2001, Journal of materials science. Materials in medicine.
[203] Kyriacos A. Athanasiou,et al. Elevated temperature degradation of a 50: 50 copolymer of PLA-PGA , 1997 .
[204] A. Lendlein,et al. Evaluation of a degradable shape-memory polymer network as matrix for controlled drug release. , 2009, Journal of controlled release : official journal of the Controlled Release Society.
[205] Martin Möller,et al. Electrospinning of polymer melts: Phenomenological observations , 2007 .
[206] A. Mikos,et al. In vitro degradation of thin poly(DL-lactic-co-glycolic acid) films. , 1999, Journal of biomedical materials research.
[207] T. Goto,et al. Bone bonding behavior of titanium and its alloys when coated with titanium oxide (TiO2) and titanium silicate (Ti5Si3). , 1996, Journal of biomedical materials research.
[208] Stephen F Badylak,et al. A quantitative method for evaluating the degradation of biologic scaffold materials. , 2007, Biomaterials.
[209] P. Marquis,et al. Selective laser sintering of ultra high molecular weight polyethylene for clinical applications. , 2000, Journal of biomedical materials research.
[210] J. Feijen,et al. In vitro leucocyte adhesion to modified polyurethane surfaces. I. Effect of ionizable functional groups. , 1992, Biomaterials.
[211] Antonio Scarano,et al. Inflammatory infiltrate, microvessel density, nitric oxide synthase expression, vascular endothelial growth factor expression, and proliferative activity in peri-implant soft tissues around titanium and zirconium oxide healing caps. , 2006, Journal of periodontology.
[212] L G Machado,et al. Medical applications of shape memory alloys. , 2003, Brazilian journal of medical and biological research = Revista brasileira de pesquisas medicas e biologicas.
[213] Joseph Jagur-Grodzinski,et al. Polymeric gels and hydrogels for biomedical and pharmaceutical applications , 2010 .
[214] M. Colina,et al. DNA deposition through laser induced forward transfer. , 2005, Biosensors & bioelectronics.
[215] F. Klocke,et al. Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .
[216] Ian M. Hutchings,et al. Direct Writing Technology Advances and Developments , 2008 .
[217] Horst A von Recum,et al. Electrospinning: applications in drug delivery and tissue engineering. , 2008, Biomaterials.
[218] T. Boland,et al. Human microvasculature fabrication using thermal inkjet printing technology. , 2009, Biomaterials.
[219] L. Murr,et al. Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting. , 2011, Journal of the mechanical behavior of biomedical materials.
[220] S Wenisch,et al. In vivo mechanisms of hydroxyapatite ceramic degradation by osteoclasts: fine structural microscopy. , 2003, Journal of biomedical materials research. Part A.
[221] P. Bártolo,et al. Evaluation of in vitro degradation of PCL scaffolds fabricated via BioExtrusion. Part 1: Influence of the degradation environment , 2010 .
[222] Sergey V. Dorozhkin,et al. Bioceramics of calcium orthophosphates. , 2010, Biomaterials.
[223] Paulo Jorge Da Silva bartolo,et al. Metal filled resin for stereolithography metal part , 2008 .
[224] Horst Fischer,et al. In vivo fracture resistance of implant-supported all-ceramic restorations. , 2003, The Journal of prosthetic dentistry.