Low-cost, rapid-prototyping of digital microfluidics devices

An innovative and simple microfabrication method for digital microfluidics is presented. In this method, devices are formed from copper substrates or gold compact disks using rapid marker masking to replace photolithography. The new method is capable of forming devices with inter-electrode gaps as small as 50 μm. Saran™ wrap (polyethylene film) and commercial water repellants were used as dielectric and hydrophobic coatings, respectively, to replace commonly used and more expensive materials such as parylene-C and Teflon-AF. Devices formed by the new method enabled single- and two-plate actuation of droplets with volumes of 1–12 μL. Fabricated devices were successfully tested for droplet manipulation, merging and splitting. We anticipate that this fabrication method will bring digital microfluidics within the reach of any laboratory with minimal facilities.

[1]  E. Richter,et al.  Gold electrodes from recordable CDs , 2000, Analytical chemistry.

[2]  Phil Paik,et al.  Electrowetting-based droplet mixers for microfluidic systems. , 2003, Lab on a chip.

[3]  Aaron R Wheeler,et al.  Electrowetting-based microfluidics for analysis of peptides and proteins by matrix-assisted laser desorption/ionization mass spectrometry. , 2004, Analytical chemistry.

[4]  Kristi S Anseth,et al.  Robust polymer microfluidic device fabrication via contact liquid photolithographic polymerization (CLiPP). , 2004, Lab on a chip.

[5]  C. Kim,et al.  An integrated digital microfluidic chip for multiplexed proteomic sample preparation and analysis by MALDI-MS. , 2006, Lab on a chip.

[6]  R. Fair,et al.  Electrowetting-based actuation of liquid droplets for microfluidic applications , 2000 .

[7]  김준원,et al.  EWOD(Electrowetting-on-Dielectric) ACTUATED OPTICAL MICROMIRROR , 2006 .

[8]  Ali Nadim,et al.  Electrowetting droplet microfluidics on a single planar surface , 2006 .

[9]  Jr-Lung Lin,et al.  Integrated polymerase chain reaction chips utilizing digital microfluidics , 2006, Biomedical microdevices.

[10]  C. Kim,et al.  Two-dimensional digital microfluidic system by multilayer printed circuit board , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[11]  M. Shanahan,et al.  Drop Motion on an Inclined Plane and Evaluation of Hydrophobia Treatments to Glass , 1995 .

[12]  R. Fair,et al.  An integrated digital microfluidic lab-on-a-chip for clinical diagnostics on human physiological fluids. , 2004, Lab on a chip.

[13]  T. Higuchi,et al.  Chemical reactions in microdroplets by electrostatic manipulation of droplets in liquid media. , 2002, Lab on a chip.

[14]  Mauro Bertotti,et al.  Disposable Gold Electrodes with Reproducible Area Using Recordable CDs and Toner Masks , 2006 .

[15]  C. Kim,et al.  Soft printing of droplets pre-metered by electrowetting , 2004 .

[16]  Aaron R Wheeler,et al.  Microcontact printing-based fabrication of digital microfluidic devices. , 2006, Analytical chemistry.

[17]  Peter R C Gascoyne,et al.  Dielectrophoresis-based programmable fluidic processors. , 2004, Lab on a chip.

[18]  S. Fan,et al.  Direct Handwriting Manipulation of Droplets by Self-Aligned Mirror-Ewod Across a Dielectric Sheet , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[19]  C. Kim,et al.  Characterization of electrowetting actuation on addressable single-side coplanar electrodes , 2006 .

[20]  Victor M Ugaz,et al.  Printed circuit technology for fabrication of plastic-based microfluidic devices. , 2004, Analytical chemistry.

[21]  David J Beebe,et al.  Ultra rapid prototyping of microfluidic systems using liquid phase photopolymerization. , 2002, Lab on a chip.

[22]  Jing-Juan Xu,et al.  Fabrication of poly(dimethylsiloxane) microfluidic system based on masters directly printed with an office laser printer. , 2005, Journal of chromatography. A.

[23]  Joonwon Kim,et al.  Using EWOD (electrowetting-on-dielectric) actuation in a micro conveyor system , 2005 .

[24]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.

[25]  Yves Fouillet,et al.  3D droplet displacement in microfluidic systems by electrostatic actuation , 2007 .

[26]  Aaron R. Wheeler,et al.  Rapid Prototyping in Copper Substrates for Digital Microfluidics , 2007 .

[27]  S. Cho,et al.  Creating, transporting, cutting, and merging liquid droplets by electrowetting-based actuation for digital microfluidic circuits , 2003 .

[28]  M. Washizu,et al.  Electrostatic actuation of liquid droplets for micro-reactor applications , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[29]  G. Whitesides,et al.  Fabrication of microfluidic systems in poly(dimethylsiloxane) , 2000, Electrophoresis.

[30]  José Alberto Fracassi da Silva,et al.  A dry process for production of microfluidic devices based on the lamination of laser-printed polyester films. , 2003, Analytical chemistry.

[31]  George M. Whitesides,et al.  Rapid prototyping of complex structures with feature sizes larger than 20 μm , 1996 .

[32]  R. Fair,et al.  Electrowetting-based actuation of droplets for integrated microfluidics. , 2002, Lab on a chip.

[33]  Yuejun Zhao,et al.  Microparticle sampling by electrowetting-actuated droplet sweeping. , 2006, Lab on a chip.

[34]  A. Ewing,et al.  Prototyping disposable electrophoresis microchips with electrochemical detection using rapid marker masking and laminar flow etching , 2002, Electrophoresis.

[35]  C. Kim,et al.  Electrowetting and electrowetting-on-dielectric for microscale liquid handling , 2002 .

[36]  Krishnendu Chakrabarty,et al.  DROPLET-BASED HOT SPOT COOLING USING TOPLESS DIGITAL MICROFLUIDICS ON A PRINTED CIRCUIT BOARD , 2005 .

[37]  M. Washizu.  Electrostatic actuation of liquid droplets for micro-reactor applications , 1997 .

[38]  C. Kim,et al.  Digital microfluidics with in-line sample purification for proteomics analyses with MALDI-MS. , 2005, Analytical chemistry.

[39]  Daniel T. Chiu,et al.  Electrowetting-Induced Droplet Movement in an Immiscible Medium , 2003 .