Ablation behavior and damage mechanisms of carbon/boron-modified phenolic 2.5D woven composite

[1]  Yu Cao,et al.  2.5D quartz fabric reinforced nanoporous phenolic composites with weakened heat transfer and optimized mechanical properties , 2022, Composites Science and Technology.

[2]  Xinghong Zhang,et al.  Lightweight quartz fiber fabric reinforced phenolic aerogel with surface densified and graded structure for high temperature thermal protection , 2022, Composites Part A: Applied Science and Manufacturing.

[3]  Kun Qian,et al.  Full-field progressive fatigue damage of 3D5D braided composites with yarn-reduction: Visualization, classification, and quantification , 2021, Composites Science and Technology.

[4]  Xinghong Zhang,et al.  Lightweight and multiscale needle quartz fiber felt reinforced siliconoxycarbide modified phenolic aerogel nanocomposite with enhanced mechanical, insulative and flame-resistant properties , 2021, Composites Science and Technology.

[5]  A. Waas,et al.  Concepts and definitions related to mechanical behavior of fiber reinforced composite materials , 2021, Composites Science and Technology.

[6]  Wenda Song,et al.  Facile fabrication of lightweight mullite fiber/phenolic ablator with low thermal conductivity via ambient pressure impregnation , 2021 .

[7]  Jian Zhao,et al.  Mechanical Properties of a Novel Tri-directional Carbon-Flax-Aramid Fiber Reinforced Composite , 2021 .

[8]  Xinghong Zhang,et al.  Lightweight multiscale hybrid carbon-quartz fiber fabric reinforced phenolic-silica aerogel nanocomposite for high temperature thermal protection , 2021 .

[9]  Dian‐sen Li,et al.  Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites , 2021, Composite Structures.

[10]  P. Weisbecker,et al.  High-flux sublimation of a 3D carbon/carbon composite: Surface roughness patterns , 2021 .

[11]  K. Qian,et al.  On-axis fatigue behaviors and failure characterization of 3D5D braided composites with yarn-reduction using X-ray computed tomography , 2020 .

[12]  Zhongwei Zhang,et al.  Effect of off-axis angle on low-velocity impact and compression after impact damage mechanisms of 3D woven composites , 2020 .

[13]  C. Casavola,et al.  Application of different acoustic emission descriptors in damage assessment of fiber reinforced plastics: A comprehensive review , 2020 .

[14]  Nghia T. Vo,et al.  Damage evolution in braided composite tubes under torsion studied by in-situ X-ray computed tomography , 2020 .

[15]  F. Marra,et al.  Manufacturing, thermochemical characterization and ablative performance evaluation of carbon-phenolic ablative material with nano-Al2O3 addition , 2019, Polymer Degradation and Stability.

[16]  E. Shin,et al.  Assessment of the ablation characteristics of carbon/phenolic composites using X-ray microtomography , 2019, Composites Science and Technology.

[17]  Ziqi Li,et al.  Situ preparation of SiO2 on graphene-assisted anti-oxidation for resol phenolic resin , 2018, Polymer Degradation and Stability.

[18]  S. Sabagh,et al.  High temperature ablation and thermo-physical properties improvement of carbon fiber reinforced composite using graphene oxide nanopowder , 2017 .

[19]  S. Wu,et al.  The imaging of failure in structural materials by synchrotron radiation X-ray microtomography , 2017 .

[20]  J. Kenny,et al.  Microstructure and ablation behavior of an affordable and reliable nanostructured Phenolic Impregnated Carbon Ablator (PICA) , 2017 .

[21]  T. Zhao,et al.  Structure and improved thermal stability of phenolic resin containing silicon and boron elements , 2016 .

[22]  Tao Liu,et al.  Collapse of 3D orthogonal woven carbon fibre composites under in-plane tension/compression and out-of-plane bending , 2016 .

[23]  A. Hubin,et al.  Microstructure and gas-surface interaction studies of a low-density carbon-bonded carbon fiber composite in atmospheric entry plasmas , 2015 .

[24]  F. Yazdani,et al.  Thermal and mechanical properties of phenolic-based composites reinforced by carbon fibres and multiwall carbon nanotubes , 2015 .

[25]  T. Minton,et al.  Pyrolysis of phenolic impregnated carbon ablator (PICA). , 2015, ACS applied materials & interfaces.

[26]  W. Lee,et al.  Effects of carbon nanotubes and carbon fiber reinforcements on thermal conductivity and ablation properties of carbon/phenolic composites , 2014 .

[27]  Stepan Vladimirovitch Lomov,et al.  Cluster analysis of acoustic emission signals for 2D and 3D woven glass/epoxy composites , 2014 .

[28]  D. Hui,et al.  Improved ablation resistance of carbon–phenolic composites by introducing zirconium diboride particles , 2013 .

[29]  Jiecai Han,et al.  Novel phenolic impregnated 3-D Fine-woven pierced carbon fabric composites: Microstructure and ablation behavior , 2012 .

[30]  Stefanie Feih,et al.  Tensile properties of carbon fibres and carbon fibre–polymer composites in fire , 2012 .

[31]  Wang Xin-wei,et al.  Modeling strategies of 3D woven composites: A review , 2011 .

[32]  Renaud Gutkin,et al.  On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses , 2011 .

[33]  S. Wongkasemjit,et al.  Significant enhancement of thermal stability in the non-oxidative thermal degradation of bisphenol-A/aniline based polybenzoxazine aerogel , 2011 .

[34]  J. Tirillò,et al.  Carbon-phenolic ablative materials for re-entry space vehicles: Manufacturing and properties , 2010 .

[35]  Mario Marchetti,et al.  A probabilistic sizing tool and Monte Carlo analysis for entry vehicle ablative thermal protection systems , 2010 .

[36]  Hongjie Wang,et al.  Pore structure control of mesoporous carbon monoliths derived from mixtures of phenolic resin and ethylene glycol , 2009 .

[37]  Frank S. Milos,et al.  Ablation and Thermal Response Property Model Validation for Phenolic Impregnated Carbon Ablator , 2009 .

[38]  Burkhard Behrens,et al.  Technologies for thermal protection systems applied on re-usable launcher , 2003 .

[39]  B. Jang,et al.  Mechanical and thermo-mechanical failure mechanism analysis of fiber/filler reinforced phenolic matrix composites , 1997 .