Microwave characterization of fly ash geopolymerization

Alkali-activated fly ash geopolymers are structural materials that can be used as a sustainable alternative to ordinary portland cement concrete in infrastructure applications. However, the widespread use of geopolymers by the construction industry has been limited in part by a lack of understanding about the fundamental reaction mechanisms that occur during their formation. Since microwave signals are very sensitive to the presence and binding state of water, microwave materials characterization is used to investigate the role of water in two fly ash geopolymers during reaction at early ages. The results indicate that this measurement technique has a promising potential for assessment of changes in geopolymer material properties during their formation. This will allow for better prediction and control of the setting behavior and mechanical and durability properties of geopolymers.

[1]  J. Deventer,et al.  The Role of Inorganic Polymer Technology in the Development of ‘Green Concrete’ , 2007 .

[2]  Ji Zhou,et al.  A novel aluminosilicate geopolymer material with low dielectric loss , 2011 .

[3]  P. Chindaprasirt,et al.  Role of microwave radiation in curing the fly ash geopolymer , 2013 .

[4]  Reza Zoughi,et al.  Wideband microwave characterization of alkali-silica reaction (ASR) gel in cement-based materials , 2013 .

[5]  Reza Zoughi,et al.  Microwave Nondestructive Estimation of Cement Paste Compressive Strength , 1995 .

[6]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[7]  Prinya Chindaprasirt,et al.  Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste , 2014 .

[8]  Mihaela Aradoaei,et al.  Considerations on the dielectric properties and thermal profile of geopolymeric composites with ferro / ferrimagnetic inserts , 2014, 2014 International Conference and Exposition on Electrical and Power Engineering (EPE).

[9]  Sergey Kharkovsky,et al.  Monitoring of Microwave Properties of Early-Age Concrete and Mortar Specimens , 2015, IEEE Transactions on Instrumentation and Measurement.

[10]  N. Neithalath,et al.  Response of alkali activated fly ash mortars to microwave curing , 2010 .

[11]  Reza Zoughi,et al.  Multimodal Solution for a Waveguide Radiating Into Multilayered Structures—Dielectric Property and Thickness Evaluation , 2009, IEEE Transactions on Instrumentation and Measurement.

[12]  Reza Zoughi,et al.  Microwave Nondestructive Determination of Sand-to-Cement Ratio in Mortar , 1997 .

[13]  Ari Sihvola,et al.  Electromagnetic mixing formulas and applications , 1999 .

[14]  I. Richardson,et al.  Composition and Microstructure of 20-year-old Ordinary Portland Cement-ground Granulated Blast-furnace Slag Blends Containing 0 to 100% Slag , 2010 .

[15]  Christopher R. Shearer.  The productive reuse of coal, biomass and co-fired fly ash , 2014 .

[16]  Reza Zoughi,et al.  Multimode solution for the reflection properties of an open-ended rectangular waveguide radiating into a dielectric half-space: the forward and inverse problems , 1999, IEEE Trans. Instrum. Meas..

[17]  Reza Zoughi,et al.  Comparison of Alkali–Silica Reaction Gel Behavior in Mortar at Microwave Frequencies , 2015, IEEE Transactions on Instrumentation and Measurement.

[18]  Andrzej Kraszewski,et al.  Microwave aquametry : electromagnetic wave interaction with water-containing materials , 1996 .