An investigation of the j-integral method for rating the crack resistance of constructional materials (a review)

[1]  P. Marcal,et al.  Small scale yielding near a crack in plane strain: A finite element analysis , 1971 .

[2]  C. Turner,et al.  Relevance of Nonlinear Fracture Mechanics to Creep Cracking , 1976 .

[3]  N.J.I. Adams,et al.  A single test method for evaluation of the J integral as a fracture parameter , 1974 .

[4]  C. Turner,et al.  Application of fracture mechanics to creep crack growth , 1974 .

[5]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[6]  K. Sadananda,et al.  Creep crack growth in alloy 718 , 1977 .

[7]  J. Begley,et al.  Test Results from J-Integral Studies: An Attempt to Establish a J Ic Testing Procedure , 1974 .

[8]  C. Turner,et al.  The measurement of crack growth resistance curves (R-curves) using the J integral , 1975, International Journal of Fracture.

[9]  A. Tetelman,et al.  COMPARISON OF VARIOUS METHODS OF MEASURING K1C ON SMALL PRECRACKED BEND SPECIMENS THAT FRACTURE AFTER GENERAL YIELD , 1976 .

[10]  J. P. Hickerson.  Experimental confirmation of the J integral as a thin section fracture criterion , 1977 .

[11]  John R. Rice,et al.  Some further results of J-integral analysis and estimates. , 1973 .

[12]  K. Broberg.  The Importance of Stable Crack Extension in Linear and Non-Linear Fracture Mechanics , 1974 .

[13]  J. Rice,et al.  Plane strain deformation near a crack tip in a power-law hardening material , 1967 .

[14]  C. E. Turner,et al.  An application of finite element techniques to post-yield analysis of proposed standard three-point bend fracture test pieces , 1974 .

[15]  W. A. Logsdon,et al.  Upper shelf temperature dependence of fracture toughness for four low to intermediate strength ferritic steels , 1977 .

[16]  Rating the crack resistance of structural steels , 1978 .

[17]  H. P. Van Leeuwen,et al.  The application of fracture mechanics to creep crack growth , 1977 .

[18]  B. B. Hundy,et al.  Initial plastic yielding in notch bend tests , 1956 .

[19]  H. Liebowitz,et al.  Correcting for nonlinear effects in fracture toughness testing , 1972 .

[20]  G. Egan.  Compatibility of linear elastic (k1c) and general yielding (COD) fracture mechanics , 1973 .

[21]  John W. Hutchinson,et al.  Singular behaviour at the end of a tensile crack in a hardening material , 1968 .

[22]  E G Ellison,et al.  The use of the C∗ parameter in predicting creep crack propagation rates , 1977 .

[23]  J. A. Begley,et al.  Serendtrity and the J integral , 1976, International Journal of Fracture.

[24]  G. Yoder,et al.  Initial Crack Extension in Two Intermediate-Strength Aluminum Alloys , 1976 .

[25]  John W. Hutchinson,et al.  Plastic stress and strain fields at a crack tip , 1968 .

[26]  V. Stepanenko,et al.  Use of linear and nonlinear fracture mechanics for assessing resistance to crack propagation in 15Kh2NMFA structural steel , 1978 .

[27]  J. Barnby,et al.  Assessment of the fracture toughness of cast steels , 1976 .

[28]  J. Sumpter.  The prediction of K Ic using J and COD from small specimen tests , 1976 .

[29]  R. Reed,et al.  Effects of specimen thickness on fracture toughness of an aluminum alloy , 1977 .

[30]  R. Pelloux,et al.  Crack extension by alternating shear , 1970 .

[31]  D. Munz,et al.  Effect of specimen type on J-integral at the onset of crack extension , 1977 .

[32]  N. Dowling,et al.  Fatigue Crack Growth During Gross Plasticity and the J-Integral , 1976 .

[33]  John G. Merkle,et al.  A J Integral Analysis for the Compact Specimen, Considering Axial Force as Well as Bending Effects , 1974 .

[34]  J. N. Robinson.  An experimental investigation of the effect of specimen type on the crack tip opening displacement and J-integral fracture criteria , 1976, International Journal of Fracture.

[35]  C. Griffis.  Elastic-Plastic Fracture Toughness: A Comparison of J-Integral and Crack Opening Displacement Characterizations , 1975 .

[36]  Elastic-plastic fatigue crack growth under load cycling , 1977 .

[37]  D. Munz,et al.  Comparison of different equations for calculation of J from one loaddisplacement curve for three point bend specimens , 1976, International Journal of Fracture.

[38]  J. Begley,et al.  A Fracture Mechanics Approach to Creep Crack Growth , 1976 .

[39]  J. Blauel,et al.  On the relation of the crack opening displacement to the J-integral , 1977, International Journal of Fracture.