Nonlinear characteristics of leakage current for flashover monitoring of ice-covered suspension insulators

This paper investigates nonlinear characteristics of leakage current (LC) for analyzing and monitoring AC flashover performance of ice-covered suspension insulators. The experiments were carried out in a cold climate room of CIGELE Laboratories according to the methods recommended by IEEE Std. 1783/2009. The maximum withstand voltage (VMW = 81 kVrms) and minimum flashover voltage (VMF = 84 kVrms) were obtained to reflect electrical performance of suspension insulators under a most dangerous ice type. The ice accretion process, the length, width and number of icicles associated with the appearance of partial discharges were observed and discussed to present the final formation of a relatively uniform ice layer and vertical icicles along the insulator string. This ice-covered insulator string was characterized by air gaps on the grounded-side shed space and complete ice bridging of the other shed spaces, which have significant influence on the development of arcing discharges leading to flashover. Nonlinear characteristics of LC were analyzed by using a recurrent plot (RP) technique, which graphically gives nonlinear variations of LC on RP maps as well as nonlinear indicators for quantitative prediction of the flashover. The obtained results reveal that dynamic behavior (initiation, propagation, extinguishment and re-ignition) of arcing discharges on ice-covered suspension insulators can be visually reflected by the texture transition of RP maps of LC, which correlate with different stages during the flashover process. The quantitative indicators including a recurrence rate (RR) value lower than 0.24 and a deterministic (DET) value lower than 0.965 are proposed as the predictive values to indicate the highest probability of flashover occurrence. The results obtained will be helpful to predict most hazards of ice-covered outdoor insulators; this is one of monitoring methods based on LC characteristic analysis.

[1]  Yan Wang,et al.  Study on AC Flashover Performance and Discharge Process of Polluted and Iced IEC Standard Suspension Insulator String , 2007, IEEE Transactions on Power Delivery.

[2]  B.X. Du,et al.  Recurrent plot analysis of leakage current for monitoring outdoor insulator performance , 2009, IEEE Transactions on Dielectrics and Electrical Insulation.

[3]  M. Farzaneh,et al.  Insulator flashover under icing conditions , 2014, IEEE Transactions on Dielectrics and Electrical Insulation.

[4]  S. Gubanski,et al.  Leakage current patterns on contaminated polymeric surfaces , 1999, IEEE Transactions on Dielectrics and Electrical Insulation.

[5]  L. Rolfseng,et al.  Insulator icing test methods and procedures: a position paper prepared by the IEEE task force on insulator icing test methods , 2003 .

[6]  M. Farzaneh,et al.  A Multi-Arc Model for Predicting AC Critical Flashover Voltage of Ice-covered Insulators , 2007, IEEE Transactions on Dielectrics and Electrical Insulation.

[7]  R. Gilmore,et al.  Topological analysis and synthesis of chaotic time series , 1992 .

[8]  L. Rolfseng,et al.  Insulator Icing Test Methods and Procedure , 2002, IEEE Power Engineering Review.

[9]  J. Zbilut,et al.  Embeddings and delays as derived from quantification of recurrence plots , 1992 .

[10]  Masanori Hara,et al.  Leakage Current and Flashover Performance of Iced Insulators , 1979, IEEE Transactions on Power Apparatus and Systems.

[11]  F Meghnefi,et al.  Monitoring leakage current of ice-covered station post insulators using artificial neural networks , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.

[12]  Jun Zhou,et al.  Characterization of pre-flashover behavior based on leakage current along suspension insulator strings covered with ice , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[13]  B. Du,et al.  Application of nonlinear methods in tracking failure test of printed circuit boards under reduced pressure , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.

[14]  B. Du,et al.  Recurrence plot analysis of discharge currents in tracking tests of gamma-ray irradiated polymers , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[15]  M. Hara,et al.  A study of the leakage current of H.V. insulators under glaze and rime , 1978, Canadian Electrical Engineering Journal.

[16]  A. El-Hag,et al.  Fundamental and low frequency harmonic components of leakage current as a diagnostic tool to study aging of RTV and HTV silicone rubber in salt-fog , 2003 .

[17]  Yi Hu,et al.  Icing flashover characteristics and discharge process of 500 kV AC transmission line suspension insulator strings , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.

[18]  Yong Liu,et al.  Recurrent plot analysis of leakage current on flashover performance of rime-iced composite insulator , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.

[19]  Masoud Farzaneh,et al.  50 years in icing performance of outdoor insulators , 2014, IEEE Electrical Insulation Magazine.

[20]  M. Farzaneh,et al.  Modeling of the AC ARC Discharge on Ice Surfaces , 1997, IEEE Power Engineering Review.

[21]  M. M. Khalifa,et al.  Performance of Line Insulators Under Rime Ice , 1967 .

[22]  M. Farzaneh,et al.  Temporal and Frequency Analysis of the Leakage Current of a Station Post Insulator during Ice Accretion , 2007, IEEE Transactions on Dielectrics and Electrical Insulation.

[23]  T. Suda.  Frequency characteristics of leakage current waveforms of a string of suspension insulators , 2005, IEEE Transactions on Power Delivery.

[24]  B. X. Du,et al.  Recurrent Plot Analysis of Leakage Current in Dynamic Drop Test for Hydrophobicity Evaluation of Silicone Rubber Insulator , 2013, IEEE Transactions on Power Delivery.