Carbon-based materials in proton exchange membrane fuel cells: a critical review on performance and application

[1]  I. Mansir,et al.  A focused review of carbon corrosion mechanism in proton exchange membrane fuel cell during start-up and shut-down processes , 2023, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[2]  M. Ramesh,et al.  Carbon nano-materials (CNMs) derived from biomass for energy storage applications: a review , 2023, Carbon Letters.

[3]  R. Rasuli,et al.  Nanoparticle-decorated graphene/graphene oxide: synthesis, properties and applications , 2023, Journal of Materials Science.

[4]  B. Fang,et al.  Conductive Polymer and Nanoparticle-Promoted Polymer Hybrid Coatings for Metallic Bipolar Plates in Proton Membrane Exchange Water Electrolysis , 2023, Applied Sciences.

[5]  Jinying Zhang,et al.  Zero to Three Dimension Structure Evolution from Carbon Allotropes to Phosphorus Allotropes , 2022, Advanced Materials Interfaces.

[6]  Z. Wadud,et al.  A comparative total cost of ownership analysis of heavy duty on-road and off-road vehicles powered by hydrogen, electricity, and diesel , 2022, Heliyon.

[7]  T. Zhang,et al.  Review on system mitigation strategies for start-stop degradation of automotive proton exchange membrane fuel cell , 2022, Applied Energy.

[8]  Junru Li,et al.  Preparation and Corrosion Resistance of Chromium Carbide Coating on Graphite by Disproportionation Reaction in Molten Salt , 2022, Journal of Materials Engineering and Performance.

[9]  Junliang Zhang,et al.  Engineering the catalyst layers towards enhanced local oxygen transport of Low-Pt proton exchange membrane fuel cells: Materials, designs, and methods , 2022, International Journal of Hydrogen Energy.

[10]  P. Jain,et al.  Investigation on 3D Printing of Graphene and Multi-walled Carbon Nanotube Mixed Flexible Electrically Conductive Parts Using Fused Filament Fabrication , 2022, Journal of Materials Engineering and Performance.

[11]  K. Karan,et al.  Designing fuel cell catalyst support for superior catalytic activity and low mass-transport resistance , 2022, Nature Communications.

[12]  W. Kao,et al.  Tribological, Anti-corrosion, and Electrical Conductivity Properties of CrC_x Coatings Deposited on Stainless Steel 316L and Used as Metal Bipolar Plates for Fuel Cells , 2022, Journal of Materials Engineering and Performance.

[13]  E. Varuvel,et al.  Polymer based flow field plates for polymer electrolyte membrane fuel cell and the scope of additive manufacturing: A techno‐economic review , 2022, International Journal of Energy Research.

[14]  D. Ingham,et al.  Alternative architectures and materials for PEMFC gas diffusion layers: A review and outlook , 2022, Renewable and Sustainable Energy Reviews.

[15]  Junliang Zhang,et al.  A perspective on influences of cathode material degradation on oxygen transport resistance in low Pt PEMFC , 2022, Nano Research.

[16]  A. Kannan,et al.  Can hydrogen be the sustainable fuel for mobility in India in the global context? , 2022, International Journal of Hydrogen Energy.

[17]  Jiqing Chen,et al.  A review of proton exchange membrane fuel cell's bipolar plate design and fabrication process , 2022, Journal of Power Sources.

[18]  Hussein M. Maghrabie,et al.  Novel Trends in Proton Exchange Membrane Fuel Cells , 2022, Energies.

[19]  P. Fornasiero,et al.  The Role of Carbon-Based Materials for Fuel Cells Performance , 2022, Carbon.

[20]  R. M. Yunus,et al.  Perspectives on carbon-alternative materials as Pt catalyst supports for a durable oxygen reduction reaction in proton exchange membrane fuel cells , 2022, Journal of Power Sources.

[21]  Abdulkader S. Hanbazazah,et al.  Current status and future perspectives of proton exchange membranes for hydrogen fuel cells. , 2022, Chemosphere.

[22]  Cijo Mathew,et al.  A comprehensive review of current research on various materials used for developing composite bipolar plates in polymer electrolyte membrane fuel cells , 2022, Polymer Composites.

[23]  E. Varuvel,et al.  Recent advancement on thermal management strategies in PEM fuel cell stack: a technical assessment from the context of fuel cell electric vehicle application , 2022, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[24]  R. Gautam,et al.  A review of bipolar plate materials and flow field designs in the all-vanadium redox flow battery , 2022, Journal of Energy Storage.

[25]  M. Vayer,et al.  Nafion membranes reinforced by cellulose nanocrystals for fuel cell applications: aspect ratio and heat treatment effects on physical properties , 2022, Journal of Materials Science.

[26]  Han‐Ik Joh,et al.  Replacement effect of fresh electrolyte on the accelerated deactivation test and recovery process of Pt/C catalysts in a half-cell system , 2021, Carbon Letters.

[27]  Nallapaneni Manoj Kumar,et al.  A Critical Assessment on Functional Attributes and Degradation Mechanism of Membrane Electrode Assembly Components in Direct Methanol Fuel Cells , 2021, Sustainability.

[28]  G. Qiao,et al.  Current status and research progress of bipolar plates for proton exchange membrane fuel cells , 2021, 2021 International Conference on Power System Technology (POWERCON).

[29]  Xiangyang Zhou,et al.  Failure behavior of gas diffusion layer in proton exchange membrane fuel cells , 2021, Journal of Power Sources.

[30]  Dinesh Kumar Madheswaran,et al.  Recent advancements on non-platinum based catalyst electrode material for polymer electrolyte membrane fuel cells: a mini techno-economic review , 2021, Bulletin of Materials Science.

[31]  A. El Nemr,et al.  Recent developments in the application of carbon-based nanomaterials in implantable and wearable enzyme-biofuel cells , 2021, Carbon Letters.

[32]  Songmiao Liang,et al.  Manipulating interfacial polymerization for polymeric nanofilms of composite separation membranes , 2021, Progress in Polymer Science.

[33]  N. Brandon,et al.  Gas diffusion layer degradation in proton exchange membrane fuel cells: Mechanisms, characterization techniques and modelling approaches , 2021, Journal of Power Sources.

[34]  G. Xydis,et al.  A review study on proton exchange membrane fuel cell electrochemical performance focusing on anode and cathode catalyst layer modelling at macroscopic level , 2021 .

[35]  Shuangfeng Wang,et al.  Modeling, design, materials and fabrication of bipolar plates for proton exchange membrane fuel cell: A review , 2021 .

[36]  O. Savadogo,et al.  Overview: Current trends in green electrochemical energy conversion and storage , 2021, Journal of Materials Research.

[37]  M. Gómez,et al.  Production of Gas Diffusion Layers with Cotton Fibers for its use in Fuel Cells , 2021 .

[38]  L. Parent,et al.  Challenges and Opportunities in Understanding Proton Exchange Membrane Fuel Cell Materials Degradation Using In‐Situ Electrochemical Liquid Cell Transmission Electron Microscopy , 2021, Advanced Functional Materials.

[39]  S. Kheawhom,et al.  Recent progress of electrocatalysts for hydrogen proton exchange membrane fuel cells , 2021, International Journal of Hydrogen Energy.

[40]  F. G. L. Parlane,et al.  Gas diffusion electrodes and membranes for CO2 reduction electrolysers , 2021, Nature Reviews Materials.

[41]  Qingfu Wang,et al.  Sulfonated poly(arylene ether)s based proton exchange membranes for fuel cells , 2021 .

[42]  K. Reichmann,et al.  Electrochemical aspects of interconnect materials in PEMFCs , 2021, International Journal of Hydrogen Energy.

[43]  V. Compañ,et al.  Proton Exchange Membrane Fuel Cells (PEMFCs): Advances and Challenges , 2021, Polymers.

[44]  Haiwei Liang,et al.  Engineering the Electronic Interaction between Metals and Carbon Supports for Oxygen/Hydrogen Electrocatalysis , 2021, ACS Materials Letters.

[45]  Sudip Kumar Batabyal,et al.  Formation of 2D-Layered (CH3NH3)3Sb2I9 Lead-Free Perovskite Phase from CH3NH3I and SbSI: Photodetection Activity in Carbon Based Lateral Devices , 2021, Journal of Electronic Materials.

[46]  A. Kannan,et al.  Accelerated stress testing of PUREBLACK® carbon-based gas diffusion layers with pore forming agent for proton exchange membrane fuel cells , 2021 .

[47]  Guangjian He,et al.  High performance polyvinylidene fluoride/graphite/multi-walled carbon nanotubes composite bipolar plate for PEMFC with segregated conductive networks , 2021, International Journal of Hydrogen Energy.

[48]  N. Brandon,et al.  Designing the next generation of proton-exchange membrane fuel cells , 2021, Nature.

[49]  M. Ramesh,et al.  Carbon substrates: a review on fabrication, properties and applications , 2021, Carbon Letters.

[50]  Li Xing-guo,et al.  Research progress in carbon-based composite molded bipolar plates , 2021 .

[51]  M. Guiver,et al.  Recent Insights on Catalyst Layers for Anion Exchange Membrane Fuel Cells , 2021, Advanced science.

[52]  Chang-feng Yan,et al.  Highly active PtCo nanoparticles on hierarchically ordered mesoporous carbon support for polymer electrolyte membrane fuel cells , 2021, Journal of Materials Science.

[53]  Wenping Sun,et al.  Non‐Platinum Group Metal Electrocatalysts toward Efficient Hydrogen Oxidation Reaction , 2021, Advanced Functional Materials.

[54]  K. Rhee,et al.  A comprehensive review on the prospects of multi-functional carbon nano onions as an effective, high- performance energy storage material , 2021 .

[55]  E. López-Chávez,et al.  Current progress of Pt-based ORR electrocatalysts for PEMFCs: An integrated view combining theory and experiment , 2021, Materials Today Physics.

[56]  Seung A. Song,et al.  A review of composite bipolar plates in proton exchange membrane fuel cells: Electrical properties and gas permeability , 2021 .

[57]  M. Mumtaz,et al.  Structural, Dielectric and Electric Modulus Studies of MnFe2O4/(MWCNTs)x Nanocomposites , 2021, Journal of Materials Engineering and Performance.

[58]  S. Marais,et al.  Progress in hybrid composite Nafion®-based membranes for proton exchange fuel cell application , 2021 .

[59]  Ahmet Kusoglu,et al.  New roads and challenges for fuel cells in heavy-duty transportation , 2021, Nature Energy.

[60]  Zhiguo Yuan,et al.  Gas diffusion electrodes (GDEs) for electrochemical reduction of carbon dioxide, carbon monoxide, and dinitrogen to value-added products: a review , 2021 .

[61]  Yadong Li,et al.  A fundamental comprehension and recent progress in advanced Pt‐based ORR nanocatalysts , 2021, SmartMat.

[62]  Yadong Li,et al.  Carbon-Supported Single-Atom Catalysts for Formic Acid Oxidation and Oxygen Reduction Reactions. , 2021, Small.

[63]  D. Buran,et al.  Characterization of Various Carbon-Based Polypropylene Nanocomposites , 2021, Journal of Materials Engineering and Performance.

[64]  Y. Kuan,et al.  Fuel Cell Stack Design Using Carbon Fiber Composites , 2020, Sensors and materials.

[65]  P. Okonkwo,et al.  A review of gas diffusion layer properties and water management in proton exchange membrane fuel cell system , 2020, International Journal of Energy Research.

[66]  Xuefeng Ren,et al.  Current progress and performance improvement of Pt/C catalysts for fuel cells , 2020 .

[67]  W. Drossel,et al.  A comprehensive comparison of state-of-the-art manufacturing methods for fuel cell bipolar plates including anticipated future industry trends , 2020 .

[68]  Wilson A. Smith,et al.  Role of the Carbon-Based Gas Diffusion Layer on Flooding in a Gas Diffusion Electrode Cell for Electrochemical CO2 Reduction , 2020, ACS Energy Letters.

[69]  J. Tjong,et al.  Recent advances and future perspectives of carbon materials for fuel cell , 2020, Renewable and Sustainable Energy Reviews.

[70]  Jinrui Chen,et al.  Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell , 2020 .

[71]  R. Lin,et al.  Detailed optimization of multiwall carbon nanotubes doped microporous layer in polymer electrolyte membrane fuel cells for enhanced performance , 2020 .

[72]  P. Karagiannidis,et al.  Highly filled graphite/graphene/carbon nanotube in polybenzoxazine composites for bipolar plate in PEMFC , 2020 .

[73]  S. Alkan Gürsel,et al.  Platinum nanoparticles decorated carbon nanofiber hybrids as highly active electrocatalysts for polymer electrolyte membrane fuel cells , 2020, International Journal of Energy Research.

[74]  H. Uyama,et al.  Formation of nanostructured graphitic carbon from coconut waste via low-temperature catalytic graphitisation , 2020 .

[75]  A. Dixit,et al.  A review on the mechanical properties of polymer composites reinforced by carbon nanotubes and graphene , 2020, Carbon Letters.

[76]  R. Borup,et al.  Recent developments in catalyst-related PEM fuel cell durability , 2020, Current Opinion in Electrochemistry.

[77]  Chao Peng,et al.  Review of System Integration and Control of Proton Exchange Membrane Fuel Cells , 2020, Electrochemical Energy Reviews.

[78]  Hong Zhu,et al.  Synthesis of H2O2–CTAB dual-modified carbon black-supported Pt3Ni to improve catalytic activity for ORR , 2020, Journal of Materials Science.

[79]  A. Neelesh,et al.  The influence of MWCNT and hybrid ( MWCNT /nanoclay) fillers on performance of EPDM‐CIIR blends in nuclear applications: Mechanical, hydrocarbon transport, and gamma‐radiation aging characteristics , 2020 .

[80]  Yali Li,et al.  An ultra-thin, flexible, low-cost and scalable gas diffusion layer composed of carbon nanotubes for high-performance fuel cells , 2020, Journal of Materials Chemistry A.

[81]  Y. Ein‐Eli,et al.  Challenges and Perspectives of Metal‐Based Proton Exchange Membrane's Bipolar Plates: Exploring Durability and Longevity , 2020 .

[82]  Hailong Li,et al.  The quantitative analysis for the formation of carbon fiber paper and its influencing factors , 2020, Journal of Materials Science.

[83]  X. Lou,et al.  Advanced Electrocatalysts for the Oxygen Reduction Reaction in Energy Conversion Technologies , 2020, Joule.

[84]  Mansoo Choi,et al.  Generation of carbon nano-onions by laser irradiation of gaseous hydrocarbons for high durability catalyst support in proton exchange membrane fuel cells , 2019 .

[85]  Nabilah Afiqah Mohd Radzuan,et al.  Fibre orientation effect on polypropylene/milled carbon fiber composites in the presence of carbon nanotubes or graphene as a secondary filler: Application on PEM fuel cell bipolar plate , 2019, International Journal of Hydrogen Energy.

[86]  S. Dhakate,et al.  Multiwall carbon nanotubes tailored porous carbon fiber paper-based gas diffusion layer performance in polymer electrolyte membrane fuel cell , 2019, Renewable Energy.

[87]  Hong-hui Wang,et al.  The synthesis of Fe@CNT-Fe/N/C catalyst and application for oxygen reduction reaction on fuel cell , 2019, Fullerenes, Nanotubes and Carbon Nanostructures.

[88]  A. Singh,et al.  Graphene and carbon nanotube reinforced epoxy nanocomposites: A review , 2019, Polymer.

[89]  S. Sharma,et al.  Carbon nanotubes: synthesis, properties and engineering applications , 2019, Carbon Letters.

[90]  Xianguo Li,et al.  A review of gas diffusion layers for proton exchange membrane fuel cells—With a focus on characteristics, characterization techniques, materials and designs , 2019, Progress in Energy and Combustion Science.

[91]  M. Swihart,et al.  Achievements, challenges and perspectives on cathode catalysts in proton exchange membrane fuel cells for transportation , 2019, Nature Catalysis.

[92]  M. Plonska-Brzezinska,et al.  Carbon Nano-Onions: A Review of Recent Progress in Synthesis and Applications , 2019, ChemNanoMat.

[93]  R. Włodarczyk.  Carbon-based materials for bipolar plates for low-temperatures PEM fuel cells — A review , 2019, Functional Materials Letters.

[94]  C. Ozgur Colpan,et al.  Performance of an HT‐PEMFC having a catalyst with graphene and multiwalled carbon nanotube support , 2019, International Journal of Energy Research.

[95]  Yuyan Shao,et al.  PGM‐Free Cathode Catalysts for PEM Fuel Cells: A Mini‐Review on Stability Challenges , 2019, Advanced materials.

[96]  P. Pei,et al.  The reactant starvation of the proton exchange membrane fuel cells for vehicular applications: A review , 2019, Energy Conversion and Management.

[97]  B. Tunaboylu,et al.  A Competitive Design and Material Consideration for Fabrication of Polymer Electrolyte Membrane Fuel Cell Bipolar Plates , 2019, Designs.

[98]  F. Costantino,et al.  Proton Conductivity of Composite Polyelectrolyte Membranes with Metal‐Organic Frameworks for Fuel Cell Applications , 2018, Advanced Materials Interfaces.

[99]  S. Hastuty,et al.  Fabrication of gas diffusion layer from carbon ramie fiber by hot press method , 2018, IOP Conference Series: Materials Science and Engineering.

[100]  Bing Li,et al.  High performance octahedral PtNi/C catalysts investigated from rotating disk electrode to membrane electrode assembly , 2018, Nano Research.

[101]  S. Hiziroglu,et al.  Development of highly conductive graphite-/graphene-filled polybenzoxazine composites for bipolar plates in fuel cells , 2018, Journal of Applied Polymer Science.

[102]  D. Tryk,et al.  The Role of Carbon Blacks as Catalyst Supports and Structural Elements in Polymer Electrolyte Fuel Cells , 2018, Nanocarbons for Energy Conversion: Supramolecular Approaches.

[103]  D. Yu,et al.  The Change of Water Distribution in Porous Media of the Polymer Electrolyte Membrane Fuel Cell after Freeze/thaw Cycles , 2018, Fuel Cells.

[104]  H. Lv,et al.  Preparation of an octahedral PtNi/CNT catalyst and its application in high durability PEMFC cathodes , 2018, RSC advances.

[105]  W. Xu,et al.  On‐Surface Synthesis of Carbon Nanostructures , 2018, Advanced materials.

[106]  I. Giannopoulou,et al.  Real life experimental determination of platinum group metals content in automotive catalytic converters , 2018 .

[107]  T. Turek,et al.  Materials, system designs and modelling approaches in techno-economic assessment of all-vanadium redox flow batteries – A review , 2018 .

[108]  Nikhil K. Kothurkar,et al.  Synthesis and characterization of graphene quantum dots/cobalt ferrite nanocomposite , 2018 .

[109]  Wan Ramli Wan Daud,et al.  PEM fuel cell system control: A review , 2017 .

[110]  T. Fujigaya,et al.  Ionomer Grafting to Polymer-wrapped Carbon Nanotubes for Polymer Electrolyte Membrane Fuel Cell Electrocatalyst , 2017 .

[111]  Siti Kartom Kamarudin,et al.  Review on microstructure modelling of a gas diffusion layer for proton exchange membrane fuel cells , 2017 .

[112]  Wenmiao Shu,et al.  Additive Manufacturing: Unlocking the Evolution of Energy Materials , 2017, Advanced science.

[113]  B. Popov,et al.  Effect of Gas Diffusion Layer Structure on the Performance of Polymer Electrolyte Membrane Fuel Cell , 2017 .

[114]  B. Pollet,et al.  Sonoelectrochemical one-pot synthesis of Pt - Carbon black nanocomposite PEMFC electrocatalyst. , 2017, Ultrasonics sonochemistry.

[115]  F. Yan,et al.  Frontiers in poly(ionic liquid)s: syntheses and applications. , 2017, Chemical Society reviews.

[116]  S. A. Gürsel,et al.  Flexible carbon–cellulose fiber-based composite gas diffusion layer for polymer electrolyte membrane fuel cells , 2017 .

[117]  Z. Dong,et al.  Chromium interlayer amorphous carbon film for 304 stainless steel bipolar plate of proton exchange membrane fuel cell , 2016 .

[118]  V. Pillai,et al.  Simultaneous unzipping and sulfonation of multi-walled carbon nanotubes to sulfonated graphene nanoribbons for nanocomposite membranes in polymer electrolyte fuel cells , 2016 .

[119]  M. Pumera,et al.  Electrochemical catalysis at low dimensional carbons: Graphene, carbon nanotubes and beyond – A review , 2016 .

[120]  Shubo Wang,et al.  Recent Progress on the Key Materials and Components for Proton Exchange Membrane Fuel Cells in Vehicle Applications , 2016 .

[121]  Hwanyeong Oh,et al.  Effect of the pore size variation in the substrate of the gas diffusion layer on water management and fuel cell performance , 2016 .

[122]  Nada Zamel,et al.  The catalyst layer and its dimensionality – A look into its ingredients and how to characterize their effects , 2016 .

[123]  A. Zulfia,et al.  Preparation of carbon composite from coconut fiber for gas diffusion layer , 2016, Ionics.

[124]  R. Giovannetti,et al.  Spectroscopic studies of porphyrin functionalized multiwalled carbon nanotubes and their interaction with TiO₂ nanoparticles surface. , 2016, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[125]  S. Dhakate,et al.  Development of multiwalled carbon nanotubes platinum nanocomposite as efficient PEM fuel cell catalyst , 2016, Materials for Renewable and Sustainable Energy.

[126]  Seung A. Song,et al.  Novel fabrication process for carbon fiber composite bipolar plates using sol gel and the double percolation effect for PEMFC , 2015 .

[127]  T. Fujigaya,et al.  A highly durable fuel cell electrocatalyst based on double-polymer-coated carbon nanotubes , 2015, Scientific Reports.

[128]  Kyoungdoug Min,et al.  A review of the gas diffusion layer in proton exchange membrane fuel cells: Durability and degradation , 2015 .

[129]  Agnieszka Iwan,et al.  Polymer fuel cell components modified by graphene: Electrodes, electrolytes and bipolar plates , 2015 .

[130]  Hansong Cheng,et al.  Recent Developments on Alternative Proton Exchange Membranes: Strategies for Systematic Performance Improvement , 2015 .

[131]  Hua Zhang,et al.  Electrochemical doping of three-dimensional graphene networks used as efficient electrocatalysts for oxygen reduction reaction. , 2015, Nanoscale.

[132]  N. Nakashima,et al.  Durable Pt Electrocatalyst Supported on a 3D Nanoporous Carbon Shows High Performance in a High-Temperature Polymer Electrolyte Fuel Cell. , 2015, ACS applied materials & interfaces.

[133]  H. Fan,et al.  Functionalized highly porous graphitic carbon fibers for high-rate supercapacitive electrodes , 2015 .

[134]  Sang Yong Nam,et al.  A review of polymer–nanocomposite electrolyte membranes for fuel cell application , 2015 .

[135]  R. Zeis,et al.  Materials and characterization techniques for high-temperature polymer electrolyte membrane fuel cells , 2015, Beilstein journal of nanotechnology.

[136]  C. Pak,et al.  Highly durable electrocatalyst with graphitized carbon supports modified by diazonium reaction for polymer electrolyte membrane fuel cell , 2014 .

[137]  T. Fuller,et al.  Carbon as Catalyst and Support for Electrochemical Energy Conversion , 2014 .

[138]  R. Mathur,et al.  Role of Fiber Length and Pore Former on the Porous Network of Carbon Paper Electrode and its Performance in PEMFC , 2014 .

[139]  A. D. Todd,et al.  Harnessing the chemistry of graphene oxide. , 2014, Chemical Society reviews.

[140]  B. Pollet,et al.  The importance of ultrasonic parameters in the preparation of fuel cell catalyst inks , 2014 .

[141]  Ravindra Datta,et al.  Understanding the gas diffusion layer in proton exchange membrane fuel cells. I. How its structural characteristics affect diffusion and performance , 2014 .

[142]  O. Shenderova.  Detonation Nanodiamonds : Science and Applications , 2014 .

[143]  Mina Hoorfar,et al.  Experimental and numerical comparison of water transport in untreated and treated diffusion layers of proton exchange membrane (PEM) fuel cells , 2013 .

[144]  A. Sulong,et al.  Effect of small-sized conductive filler on the properties of an epoxy composite for a bipolar plate in a PEMFC , 2013 .

[145]  Anil Verma,et al.  Efficient composite bipolar plate reinforced with carbon fiber and graphene for proton exchange membrane fuel cell , 2013 .

[146]  E. Bekyarova,et al.  Functionalized Single-Walled Carbon Nanotube-Based Fuel Cell Benchmarked Against US DOE 2017 Technical Targets , 2013, Scientific Reports.

[147]  S. Hirai,et al.  Fabrication and performance evaluation of structurally-controlled PEMFC catalyst layers by blending platinum-supported and stand-alone carbon black , 2013 .

[148]  D. Su,et al.  Nanocarbons for the development of advanced catalysts. , 2013, Chemical reviews.

[149]  A. Sulong,et al.  Effect of the compression molding parameters on the in-plane and through-plane conductivity of carbon nanotubes/graphite/epoxy nanocomposites as bipolar plate material for a polymer electrolyte membrane fuel cell , 2013 .

[150]  T. Fujigaya,et al.  Effective anchoring of Pt-nanoparticles onto sulfonated polyelectrolyte-wrapped carbon nanotubes for use as a fuel cell electrocatalyst , 2013 .

[151]  Selmiye Alkan Gürsel,et al.  Layer-by-Layer Polypyrrole Coated Graphite Oxide and Graphene Nanosheets as Catalyst Support Materials for Fuel Cells , 2013 .

[152]  L. Drzal,et al.  Exploring the potential of exfoliated graphene nanoplatelets as the conductive filler in polymeric nanocomposites for bipolar plates , 2012 .

[153]  Wei-Nien Su,et al.  Ultrathin TiO2-coated MWCNTs with excellent conductivity and SMSI nature as Pt catalyst support for oxygen reduction reaction in PEMFCs , 2012 .

[154]  Youngchul Park,et al.  Investigation of the corrosion of carbon supports in polymer electrolyte fuel cells using simulated start-up/shutdown cycling , 2012 .

[155]  S. Miyata,et al.  Oxygen reduction activity of carbon nitride supported on carbon nanotubes. , 2012, Journal of nanoscience and nanotechnology.

[156]  Jong-Won Lee,et al.  A review of gas diffusion layer in PEM fuel cells: Materials and designs , 2012 .

[157]  A. Mendes,et al.  Use of single wall carbon nanohorns in polymeric electrolyte fuel cells , 2011, Journal of Materials Science.

[158]  Q. Fu,et al.  Shear induced fiber orientation, fiber breakage and matrix molecular orientation in long glass fiber reinforced polypropylene composites , 2011 .

[159]  Volkmar Ett,et al.  Carbon materials in composite bipolar plates for polymer electrolyte membrane fuel cells: A review o , 2011 .

[160]  S. Ramaprabhu,et al.  Nitrogen doped graphene nanoplatelets as catalyst support for oxygen reduction reaction in proton exchange membrane fuel cell , 2010 .

[161]  Jean-Christophe Charlier,et al.  Graphene and graphite nanoribbons: Morphology, properties, synthesis, defects and applications , 2010 .

[162]  D. Su,et al.  Nanostructured carbon and carbon nanocomposites for electrochemical energy storage applications. , 2010, ChemSusChem.

[163]  K. S. Dhathathreyan,et al.  The electrical conductivity of a composite bipolar plate for fuel cell applications , 2009 .

[164]  J. Pirard,et al.  Carbon xerogels as supports for catalysts and electrocatalysts , 2009 .

[165]  Hui-Fei Huang,et al.  Reduction–adsorption behavior of platinum ions on activated carbon fibers , 2007 .

[166]  Xianguo Li.  Proton Exchange Membrane Fuel Cells (PEMFCs) , 2005 .

[167]  Jan Rossmeisl.  Oxygen Reduction Reaction , 2022 .

[168]  S. Samanta,et al.  Experimental investigation on multidimensional carbon nanofiller reinforcement in HDPE: An evaluation of mechanical performance , 2020, Materials Today: Proceedings.

[169]  Witold Abramowicz,et al.  Challenges , 2007, Prehospital and Disaster Medicine.

[170]  D. Rana,et al.  Carbon Nanomaterials in Renewable Energy Production and Storage Applications , 2019, Environmental Chemistry for a Sustainable World.

[171]  Kui Jiao,et al.  Cold start of proton exchange membrane fuel cell , 2018 .

[172]  Scott A. Mauger,et al.  Fuel Cell Performance Implications of Membrane Electrode Assembly Fabrication with Platinum-Nickel Nanowire Catalysts , 2018 .

[173]  Chao Zhang,et al.  Networking Pyrolyzed Zeolitic Imidazolate Frameworks by Carbon Nanotubes Improves Conductivity and Enhances Oxygen‐Reduction Performance in Polymer‐Electrolyte‐Membrane Fuel Cells , 2017, Advanced materials.

[174]  Arunkumar Jayakumar,et al.  A technical review on gas diffusion, mechanism and medium of PEM fuel cell , 2014, Ionics.

[175]  Hongbo Liu,et al.  Preparation and characterization of graphite/resin composite bipolar plates for polymer electrolyte membrane fuel cells , 2014 .

[176]  R. Wycisk,et al.  Nanofiber Electrodes with Low Platinum Loading for High Power Hydrogen/Air PEM Fuel Cells , 2013 .

[177]  Carmen Chuy,et al.  The Impact of Potential Cycling on PEMFC Durability , 2013 .

[178]  J.-P. Birat,et al.  Materials, beyond Life Cycle Thinking , 2012 .

[179]  Jeanette E. Owejan,et al.  Surface Chemistry of Carbon Black Electrocatalyst Supports as a Result of a Commercial Synthethic Route , 2012 .

[180]  Branko N. Popov,et al.  Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance , 2011 .

[181]  E. Yoo,et al.  Sub-nano-Pt cluster supported on graphene nanosheets for CO tolerant catalysts in polymer electrolyte fuel cells , 2011 .

[182]  Hilde van der Togt,et al.  Publisher's Note , 2003, J. Netw. Comput. Appl..