A Calibration Test Platform of Power Quality Instruments for Grid Integration of Wind Energy System

Evaluation of power quality (PQ) becomes an important issue for the grid integration of wind energy systems. To provide accurate estimation of grid situations, a calibration test platform is designed in this paper to assess the capability of commercial PQ instruments. In accordance with the latest International Electrotechnical Commission standards, the test power signals can be generated, and the standard PQ indices can be precisely obtained by designed autoregressive-model-based synchronization and voltage envelope extraction processes. In this way, the commercial PQ instruments can be conveniently calibrated to meet the measurement requirements during the continuous operation of wind turbine.

[1]  Gabriel Garcerá,et al.  An Adaptive Synchronous-Reference-Frame Phase-Locked Loop for Power Quality Improvement in a Polluted Utility Grid , 2012, IEEE Transactions on Industrial Electronics.

[2]  Hsiung-Cheng Lin,et al.  Power Harmonics and Interharmonics Measurement Using Recursive Group-Harmonic Power Minimizing Algorithm , 2012, IEEE Transactions on Industrial Electronics.

[3]  Vassilios G. Agelidis,et al.  Frequency Adaptive Least-Squares-Kalman Technique for Real-Time Voltage Envelope and Flicker Estimation , 2012, IEEE Transactions on Industrial Electronics.

[4]  Carmine Landi,et al.  Accuracy Analysis of Algorithms Adopted in Voltage Dip Measurements , 2010, IEEE Transactions on Instrumentation and Measurement.

[5]  Gary W. Chang,et al.  Virtual Instrumentation and Educational Platform for Time-Varying Harmonic and Interharmonic Detection , 2010, IEEE Transactions on Industrial Electronics.

[6]  Yu-Jen Liu,et al.  On Real-Time Simulation for Harmonic and Flicker Assessment of an Industrial System With Bulk Nonlinear Loads , 2010, IEEE Transactions on Industrial Electronics.

[7]  Engin Özdemir,et al.  Synchronous-Reference-Frame-Based Control Method for UPQC Under Unbalanced and Distorted Load Conditions , 2011, IEEE Transactions on Industrial Electronics.

[8]  G.W. Chang,et al.  A Digital Implementation of Flickermeter in the Hybrid Time and Frequency Domains , 2009, IEEE Transactions on Power Delivery.

[9]  Regan Zane,et al.  Power-Mode Control of Multiphase Resonant Electronic Ballast , 2012, IEEE Transactions on Industrial Electronics.

[10]  Cheng-I Chen Virtual Multifunction Power Quality Analyzer Based on Adaptive Linear Neural Network , 2012, IEEE Transactions on Industrial Electronics.

[11]  Pradipta Kishore Dash,et al.  A Fast Recursive Algorithm for the Estimation of Frequency, Amplitude, and Phase of Noisy Sinusoid , 2011, IEEE Transactions on Industrial Electronics.