Chemical and Ultrastructural Aspects of Thermally Modified Wood with Emphasis on Durability

The Termovuoto (thermo-vacuum) process is an environmental friendly industrial approach to modify wood by combining efficient vacuum drying and thermo-treatment. In this thesis, chemical and ultrastructural aspects of two softwoods (spruce and fir for 4 h at 160−220°C) and two hardwoods (ash and beech for 3 h at 190−220°C) thermally modified using the Termovuoto process were studied by lightand electron microscopy with emphasis on durability. Histochemical staining indicated an increasing amount of acidic groups in thermally modified woods (TMWs), particularly in the compound middle lamella (CML) including middle lamella cell corner (MLcc) (CMLcc) regions of TMWs treated at 220°C (TMW220°C). TEM observations showed significantly increased KMnO4 staining intensity of lignin in TMW220°C, presence of electron dense particles in CMLcc regions of softwood TMW220°C, and large lignin aggregates and disordered lamellar structure in the fibre S2 layer of hardwood TMW220°C. The durability of TMWs against two white rot (Phlebia radiata, Pycnoporous sanguineus)-, two brown rot (Postia placenta, Gloeophyllum trabeum)and three soft rot (Chaetomium globosum, Phialophora mutabilis, Phialophora malorum) fungi was evaluated by the soil block test. For brownand white-rot fungi, Termovuoto treatment showed considerable improvement in durability class (i.e. class 1−3) for softand hardwoods at 220°C against all fungal species tested. Softwood TMWs showed an overall lower decay resistance than hardwood TMWs, among which ash TMWs showed greater durability than beech TMWs. For soft rot fungi, softwood TMWs were more durable than hardwood TMWs, irrespective of fungal species. Ash showed lower durability than beech in untreated reference wood, while ash TMWs showed greater durability than beech TMWs during one year decay test. Behavior of thermal modification (TM) differed significantly between ash (ring-porous hardwood) and beech (diffuse-porous hardwood) against brown-, whiteand soft-rot fungi, indicating importance of the native wood anatomy. Decay patterns and morphological changes of TMWs were examined by lightand electron microscopy. The white rot fungus P. sanguineus did not show significant differences in characteristic features of decay in tracheids and fibres of TMWs compared to those in untreated reference. However, the delignification process in tracheids and fibres by P. sanguineus was delayed in TMWs, particularly at high treatment temperatures as evidenced by narrower transition zones from delignified and lignified areas than untreated reference. The soft rot fungus P. mutabilis produced typical soft rot Type-I cavities in fibres of hardwood TMWs at low temperature (190−200°C). However, soft rot cavity formation was greatly inhibited and/or delayed in fibres at high treatment temperatures (i.e. 210−220°C). Ash TMW200°C showed a radial-like distribution of electron dense materials in cavities and lack of fibrillar-like materials within degraded fibre walls, which differed from reference. The fungal durability of Termovuoto TMWs differed in terms of treatments, wood and fungal species. The Termovuoto process did not change the patterns of decay caused by white-, brownand soft-rot fungi used, but rather slowed down the decay process at certain treatment temperatures for certain wood species. Understanding of the decay patterns in TMWs is essential for further optimization of the Termovuoto process for improving the durability of specific wood species for specific purposes.

[1]  G. Daniel,et al.  Decay resistance of softwoods and hardwoods thermally modified by the Thermovouto type thermo-vacuum process to brown rot and white rot fungi , 2016 .

[2]  M. C. Salvatici,et al.  In situ ESEM observations of spruce wood (Picea abies Karst.) during heat treatment , 2016, Wood Science and Technology.

[3]  M. Jebrane,et al.  Chemical, physical-mechanical characterization and durability of thermally modified beech and ash wood by thermo-vacuum treatments (Termovuoto) , 2016 .

[4]  G. Daniel.  Fungal Degradation of Wood Cell Walls , 2016 .

[5]  G. Daniel,et al.  Cytochemical and immunocytochemical characterization of wood decayed by the white rot fungus Pycnoporus sanguineus II. Degradation of lignin and non-cellulosic polysaccharides in European ash wood , 2015 .

[6]  G. Daniel,et al.  Chemical and ultrastructural changes of ash wood thermally modified using the thermo-vacuum process: I. Histo/cytochemical studies on changes in the structure and lignin chemistry , 2015 .

[7]  Adya P. Singh,et al.  Biotechnological applications of wood-rotting fungi: a review. , 2014 .

[8]  G. Daniel.  Fungal and Bacterial Biodegradation: White Rots, Brown Rots, Soft Rots, and Bacteria , 2014 .

[9]  V. Arantes,et al.  Current Understanding of Brown-Rot Fungal Biodegradation Mechanisms: A Review , 2014 .

[10]  H. Militz,et al.  Changes in the microstructure of birch wood after hydrothermal treatment , 2013, Wood Science and Technology.

[11]  Dick Sandberg,et al.  Thermo-hydro and thermo-hydro-mechanical wood processing: An opportunity for future environmentally friendly wood products , 2013 .

[12]  M. Pétrissans,et al.  Comparison of chemical composition and decay durability of heat treated wood cured under different inert atmospheres: Nitrogen or vacuum , 2013 .

[13]  O. Allegretti,et al.  Thermo-vacuum Modification of some European Softwood and Hardwood Species Treated at Different Conditions , 2013 .

[14]  K. Takabe,et al.  Anatomy and lignin distribution in reaction phloem fibres of several Japanese hardwoods. , 2012, Annals of botany.

[15]  N. Terziev,et al.  THERMO-VACUUM MODIFICATION OF SPRUCE (PICEA ABIES KARST.) AND FIR (ABIES ALBA MILL.) WOOD , 2012 .

[16]  G. Sridharan,et al.  Toluidine blue: A review of its chemistry and clinical utility , 2012, Journal of oral and maxillofacial pathology : JOMFP.

[17]  G. Daniel,et al.  Distribution of glucomannans and xylans in poplar xylem and their changes under tension stress , 2012, Planta.

[18]  C. Hill,et al.  WOOD MODIFICATION: AN UPDATE , 2011 .

[19]  M. Boonstra,et al.  Strength properties of thermally modified softwoods and its relation to polymeric structural wood constituents , 2007, Annals of Forest Science.

[20]  S. Pang,et al.  Changes in chemistry, color, dimensional stability and fungal resistance of Pinus radiata D. Don wood with oil heat-treatment , 2011 .

[21]  M. Pétrissans,et al.  Use of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species , 2010 .

[22]  M. Göken,et al.  Micromechanics and ultrastructure of pyrolysed softwood cell walls. , 2010, Acta biomaterialia.

[23]  A. Pfriem,et al.  Alteration of the unsteady sorption behaviour of maple (Acer pseudoplatanus L.) and spruce (Picea abies (L.) Karst.) due to thermal modification , 2010 .

[24]  J. Van den Bulcke,et al.  Impact of organosilicon treatments on the wood-water relationship of solid wood , 2010 .

[25]  M. Petrič,et al.  Prediction of the decay resistance of heat treated wood on the basis of its elemental composition. , 2010 .

[26]  H. Militz,et al.  Characterisation of thermally modified wood: molecular reasons for wood performance improvement , 1998, Holz als Roh- und Werkstoff.

[27]  Helena Pereira,et al.  Wood modification by heat treatment: a review. , 2009 .

[28]  J. Fromm,et al.  Ultrastructural development of the softwood cell wall during pyrolysis , 2009 .

[29]  Jasna S. Stevanic,et al.  Analysis of thermally treated wood samples using dynamic FT-IR-spectroscopy , 2008 .

[30]  G. Wegener,et al.  Chemical Characterization and Comparison of Thermally Treated Beech and Ash Wood , 2008 .

[31]  G. Wegener,et al.  Behaviour of lignin during thermal treatments of wood , 2008 .

[32]  Liu Yi-xing,et al.  Heat-treated wood and its development in Europe , 2002, Journal of Forestry Research.

[33]  S. Grelier,et al.  Modification of Fagus sylvatica L. with 1,3-dimethylol-4,5-dihydroxy ethylene urea (DMDHEU). Part 2: Pore size distribution determined by differential scanning calorimetry , 2008 .

[34]  P. Halada,et al.  Characteristics of Gloeophyllum trabeum Alcohol Oxidase, an Extracellular Source of H2O2 in Brown Rot Decay of Wood , 2007, Applied and Environmental Microbiology.

[35]  G. Wegener,et al.  Chemical changes during the production of thermo-treated beech wood , 2007, Wood Science and Technology.

[36]  M. Hakkou,et al.  Investigations of the reasons for fungal durability of heat-treated beech wood , 2006 .

[37]  H. Militz,et al.  Microstructural and physical aspects of heat treated wood. Part 1. softwoods , 2006 .

[38]  C. Hill,et al.  Wood Modification: Chemical, Thermal and Other Processes , 2006 .

[39]  A. O. Rapp,et al.  European Thematic Network for Wood Modification REVIEW ON HEAT TREATMENTS OF WOOD , 2006 .

[40]  M. Boonstra,et al.  Chemical analysis of heat treated softwoods , 2006, Holz als Roh- und Werkstoff.

[41]  T. P. O'Brien,et al.  Polychromatic staining of plant cell walls by toluidine blue O , 1964, Protoplasma.

[42]  R. Möller,et al.  Ray tracheids in Pinus radiata are more highly resistant to soft rot as compared to axial tracheids: relationship to lignin concentration , 2005, Wood Science and Technology.

[43]  H. Militz,et al.  Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood , 2005, Holz als Roh- und Werkstoff.

[44]  G. Daniel,et al.  Cryo-FE-SEM & TEM immuno-techniques reveal new details for understanding white-rot decay of lignocellulose. , 2004, Comptes rendus biologies.

[45]  G. Daniel,et al.  Use of monoclonal antibodies to detect Mn(II)-peroxidase in birch wood degraded by Phanerochaete chrysosporium , 1991, Applied Microbiology and Biotechnology.

[46]  Bartłomiej Mazela,et al.  Resistance of thermally modified wood to Basidiomycetes , 2004 .

[47]  G. Daniel,et al.  Microview of wood under degradation by bacteria and fungi. , 2003 .

[48]  T. Vuorinen,et al.  Carbon-Thirteen Cross-Polarization Magic Angle Spinning Nuclear Magnetic Resonance and Fourier Transform Infrared Studies of Thermally Modified Wood Exposed to Brown and Soft Rot Fungi , 2003, Applied spectroscopy.

[49]  Barry Goodell,et al.  Brown-rot fungal degradation of wood: our evolving view. , 2003 .

[50]  S. Maunu,et al.  Magnetic Resonance Studies of Thermally Modified Wood , 2002 .

[51]  A. Pizzi,et al.  Durability of heat-treated wood , 2002, Holz als Roh- und Werkstoff.

[52]  R. ten Have,et al.  Oxidative mechanisms involved in lignin degradation by white-rot fungi. , 2001, Chemical reviews.

[53]  K. Jensen,et al.  Pathways for Extracellular Fenton Chemistry in the Brown Rot Basidiomycete Gloeophyllum trabeum , 2001, Applied and Environmental Microbiology.

[54]  H. Militz,et al.  2 Heat treatment of wood by the PLATO-Process , 2000 .

[55]  L. Vrijmoed,et al.  Optimization of laccase production by Pycnoporus sanguineus in submerged liquid culture , 2000 .

[56]  A. Rapp.  Heat treatment of wood in Germany-state of the art , 2000 .

[57]  M. Vernois.  Heat treatment of wood in France – state of the art , 2000 .

[58]  G. Daniel,et al.  Developments in the Study of Soft Rot and Bacterial Decay , 1997 .

[59]  Armin Fiechter,et al.  Enzymes of white-rot fungi involved in lignin degradation and ecological determinants for wood decay , 1995 .

[60]  Geoffrey Daniel,et al.  Use of electron microscopy for aiding our understanding of wood biodegradation , 1994 .

[61]  Robert A. Blanchette,et al.  Microbial and Enzymatic Degradation of Wood and Wood Components , 2012, Springer Series in Wood Science.

[62]  B. Pettersson,et al.  Intra- and Extracellular Localization of Lignin Peroxidase during the Degradation of Solid Wood and Wood Fragments by Phanerochaete chrysosporium by Using Transmission Electron Microscopy and Immuno-Gold Labeling , 1989, Applied and environmental microbiology.

[63]  K. Messner,et al.  Penetrability of White Rot-Degraded Pine Wood by the Lignin Peroxidase of Phanerochaete chrysosporium , 1988, Applied and environmental microbiology.

[64]  J. Obst.  Guaiacyl and Syringyl Lignin Composition in Hardwood Cell Components , 1982 .

[65]  A. Heyn,et al.  THE MICROCRYSTALLINE STRUCTURE OF CELLULOSE IN CELL WALLS OF COTTON, RAMIE, AND JUTE FIBERS AS REVEALED BY NEGATIVE STAINING OF SECTIONS , 1966, The Journal of cell biology.