论文信息 - Performance of Printable Antennas with Different Conductor Thickness

Performance of Printable Antennas with Different Conductor Thickness

This paper shows that L-shaped monopole antenna on PPS manufactured by inkjet printing of nano silver ink is able to produce very competitive overall antenna performance against Rogers copper foil structures if the thickness of the printed conductor layer is about the skin depth at the operating frequency multiplied by four.

[1] Matti Mäntysalo,et al. An inkjet-deposited antenna for 2.4 GHz applications , 2009 .

[2] Hans-Erik Nilsson,et al. Printed antennas with variable conductive ink layer thickness , 2007 .

[3] Li Yang,et al. Design and characterization of novel paper-based inkjet-printed UHF antennas for RFID and sensing applications , 2007, 2007 IEEE Antennas and Propagation Society International Symposium.

[4] J. Siden,et al. Line width limitations of flexographic-screen- and inkjet printed RFID antennas , 2007, 2007 IEEE Antennas and Propagation Society International Symposium.

[5] Li Yang,et al. RFID Tag and RF Structures on a Paper Substrate Using Inkjet-Printing Technology , 2007, IEEE Transactions on Microwave Theory and Techniques.

[6] Li Yang,et al. Low Cost Inkjet-printing Paper-Based Modules for RFID Sensing and Wireless Applications , 2008, 2008 38th European Microwave Conference.

[7] M. Tentzeris,et al. Design and Characterization of a $W$-Band Micromachined Cavity Filter Including a Novel Integrated Transition From CPW Feeding Lines , 2007, IEEE Transactions on Microwave Theory and Techniques.