Mechanical alloying of MoSi2 with ternary alloying elements. Part 1: Experimental

[1]  J. Watts,et al.  An experimental study of bonding and crystal structure modifications in MoSi2 and MoSi2+xAl (x=10 to 40 at% Al) via Auger parameter shifts and charge transfer calculations , 2001 .

[2]  J. A. Sekhar,et al.  Processing, Microstructures, and Properties of Molybdenum Aluminosilicide , 1998 .

[3]  M. Kaufman,et al.  Processing of MoSi2-based intermetallics , 1997 .

[4]  B. Yen,et al.  Influence of Powder Composition and Milling Media on the Formation of Molybdenum Disilicide by a Mechanically Induced Self‐Propagating Reaction , 1996 .

[5]  Lin Liu,et al.  Solid state reactions induced by mechanical alloying in metal-silicon (metal = Mo, Nb) systems , 1995 .

[6]  M. Kaufman,et al.  Applications of in situ reactions to MoSi2-based materials , 1995 .

[7]  D. Zhang.  Phase formation during mechanical alloying of Mo and Si powders , 1995 .

[8]  Michael J. Kaufman,et al.  Microstructural modification of MoSi2 through aluminum additions , 1993 .

[9]  E. Ma,et al.  Evidence for self-sustained MoSi_2 formation during room-temperature high-energy ball milling of elemental powders , 1993 .

[10]  A. Heuer,et al.  The mechanism of mechanical alloying of MoSi_2 , 1993 .

[11]  C. Maggiore,et al.  Synthesis of molybdenum disilicide by mechanical alloying , 1992 .

[12]  W. Boettinger,et al.  Application of ternary phase diagrams to the development of MoSi2-based materials , 1992 .

[13]  H. Nowotny,et al.  Untersuchungen in den Dreistoffsystemen: V—Al—Si, Nb—Al—Si, Cr—Al—Si, Mo—Al—Si bzw. Cr(Mo)—Al—Si , 1961 .

[14]  B. Yen,et al.  Synthesis and formation mechanisms of molybdenum silicides by mechanical alloying. , 1996 .