Environmental Impact Assessment of High Pressure Water Scrubbing Biogas Upgrading Technology

The aim of this work was to assess the burdens of a process in terms of environmental and health impacts, resource depletion issues, and energy demand based on the ability of the Life Cycle Assessment methodology to link the environmental impacts with the mass and energy flows. The analysis was done in terms of process and environmental performances of high pressure water scrubbing (HPWS) system applied for biogas upgrading. The application of process simulation based on the Aspen Plus® software has been considered as supportive for the calculation of mass and energy balances. Data processed using GaBi 4: Software showed that global warming, acidification, and human toxicity potentials were the main impact categories associated with the HPWS process. These indicators are largely related to the exhaust gas from the desorption column and the indirect emissions generated during energy consumption. The life cycle inventory study resulted in the development of a database with a vast inventory of data regarding HPWS technology. A basis for assessing potential improvements in the environmental performance of the system is provided. Future studies in this area will address the economical evaluation of the HPWS technology, so as to maximize economic efficiency and minimize environmental impacts.

[1]  Mary Ann Curran,et al.  The status of life‐cycle assessment as an environmental management tool , 2004 .

[2]  Frank Graf,et al.  Optimierungspotenzial von Wäschen zur Biogasaufbereitung Teil 2. Chemische Wäschen , 2011 .

[3]  J Rintala,et al.  Landfill gas upgrading with countercurrent water wash. , 2008, Waste management.

[4]  V. K. Vijay,et al.  Biogas scrubbing, compression and storage: perspective and prospectus in Indian context , 2005 .

[5]  Andrzej Ziębik,et al.  Comparative analysis of energy requirements of CO2 removal from metallurgical fuel gases , 2007 .

[6]  Xavier Gabarrell,et al.  Life cycle assessment of biogas upgrading technologies. , 2012, Waste management.

[7]  Thapat Silalertruksa,et al.  Environmental sustainability assessment of bio-ethanol production in Thailand , 2009 .

[8]  Peter Weiland,et al.  Production and energetic use of biogas from energy crops and wastes in Germany , 2003, Applied biochemistry and biotechnology.

[9]  Iulia Tuca,et al.  Design of buildings including environmental impact , 2010 .

[10]  C. Mateescu,et al.  OPPORTUNITIES AND BARRIERS FOR DEVELOPMENT OF BIOGAS TECHNOLOGIES IN ROMANIA , 2008 .

[11]  Meng Liu,et al.  LIFE CYCLE ASSESSMENT FOR CARBON EMISSION OF PLATE GLASS INDUSTRY , 2011 .

[12]  J. G. Petrie,et al.  Life cycle assessment applied to process design: Environmental and economic analysis and optimization of a nitric acid plant , 1996 .

[13]  M. Curran.  Life cycle assessment: An international experience , 2000 .

[14]  Maria Gavrilescu,et al.  DECISION SUPPORT MODELS FOR SOLID WASTE MANAGEMENT - AN OVERVIEW , 2010 .

[15]  Maria Gavrilescu,et al.  SUSTAINABILITY IN ENVIRONMENTAL REMEDIATION , 2011 .

[16]  P Mostbauer,et al.  Climate balance of biogas upgrading systems. , 2010, Waste management.

[17]  N. Tippayawong,et al.  Biogas quality upgrade by simultaneous removal of CO2 and H2S in a packed column reactor , 2010 .