Influence of veneer densification on the shear strength and temperature behavior inside the plywood during hot press

[1]  P. Bekhta,et al.  Effect of short-term thermomechanical densification of wood veneers on the properties of birch plywood , 2018, European Journal of Wood and Wood Products.

[2]  Rastislav Igaz,et al.  Influence of Urea-formaldehyde Adhesive Modification with Beech Bark on Chosen Properties of Plywood , 2017 .

[3]  C. D. Menezzi,et al.  Properties of a Laminated Wood Composite Produced with Thermomechanically Treated Veneers , 2016 .

[4]  P. Bekhta,et al.  Effect of surface treatment on bondability of birch veneer with PF resin , 2015 .

[5]  Manuel Dierick,et al.  Impact of internal structure on water-resistance of plywood studied using neutron radiography and X-ray tomography , 2014 .

[6]  P. Bekhta,et al.  Effect of thermomechanical densification on surface roughness of wood veneers , 2014 .

[7]  Jianzhang Li,et al.  Effects of Hot-Pressing Parameters on Shear Strength of Plywood Bonded with Modified Soy Protein Adhesives , 2014 .

[8]  F. Kamke,et al.  Simultaneous drying and densification of silver birch (Betula pendula L.) veneers: analysis of morphology, thickness swelling, and density profile , 2013, Wood Science and Technology.

[9]  O. Paajanen,et al.  RESULTS FROM EXPERIMENTS WITH A NEW VENEER CONTACT DRYING TECHNOLOGY , 2012 .

[10]  M. Mamiński,et al.  Veneer densification as a tool for shortening of plywood pressing time. , 2010 .

[11]  P. Bekhta,et al.  Effect of pre-pressing of veneer on the glueability and properties of veneer-based products , 2010, European Journal of Wood and Wood Products.

[12]  P. Bekhta,et al.  Properties of plywood manufactured from compressed veneer as building material , 2009 .

[13]  C. Costa,et al.  Modeling Rheology In The Hot-Pressing Of MDF: Comparison Of Mechanical Models , 2007 .

[14]  P. Bekhta,et al.  Reduction of glue consumption in the plywood production by using previously compressed veneer , 2007, Holz als Roh- und Werkstoff.

[15]  Alain Cloutier,et al.  CHARACTERIZATION OF HEAT AND MASS TRANSFER IN THE MAT DURING THE HOT PRESSING OF MDF PANELS , 2005 .

[16]  I. Aydin.  Activation of wood surfaces for glue bonds by mechanical pre-treatment and its effects on some properties of veneer surfaces and plywood panels , 2004 .

[17]  B. Wang,et al.  Development of a new incising technology for plywood/LVL production. Part 2. Effect of incising on LVL strength properties , 2003 .

[18]  Hisashi Nishimura,et al.  Effective Thermal Conductivity of Compressed Woods , 2000, Heat Transfer: Volume 3.

[19]  C. Lum,et al.  Pilot plant evaluation of steam-injection pressing for LVL and plywood products , 2000 .

[20]  R. Geimer,et al.  Steam-assisted hot-pressing of construction plywood , 1994 .

[21]  Antonio Pizzi,et al.  Handbook of adhesive technology , 1994 .

[22]  Terry Sellers,et al.  Plywood and Adhesive Technology , 1985 .