Enhancement of the Power Conversion Efficiency in Organic Photovoltaics by Unveiling the Appropriate Polymer Backbone Enlargement Approach

Optoelectronic properties, supramolecular assemblies, and morphology variation of polymeric semiconductors are governed by six fundamental chemical features. These features are molecular weight, bond length alternation (BLA), planarity, aromatic resonance energy, substituents, and intermolecular interactions. Of these features the specific role of BLA in determining the performance of a polymeric semiconductor in practical technological applications is so far unknown. This study investigates this question and reports the novel finding that the optoelectronic, microscopic (supramolecular packing), and macroscopic (morphology variation and device performance) properties of model semiconducting polymers depend on the conjugated polymer backbone enlargement, which is directly related to the BLA. Extensive studies are performed in both single‐component polymer films and their blends with fullerene derivatives. Understanding the specific structure‐properties relations will lead to significant advancement in the area of organic electronics, since it will set new design rules toward further optimization of polymer chemical structures to enhance the device performances.

[1]  C. Brabec,et al.  An Alternative Strategy to Adjust the Recombination Mechanism of Organic Photovoltaics by Implementing Ternary Compounds , 2015 .

[2]  C. Brabec,et al.  Systematic Analysis of Polymer Molecular Weight Influence on the Organic Photovoltaic Performance. , 2015, Macromolecular rapid communications.

[3]  K. Müllen,et al.  Donor-Acceptor Polymers. , 2015, Journal of the American Chemical Society.

[4]  C. Brabec,et al.  Photophysics of Molecular‐Weight‐Induced Losses in Indacenodithienothiophene‐Based Solar Cells , 2015 .

[5]  Timothy M. Burke,et al.  Disorder‐Induced Open‐Circuit Voltage Losses in Organic Solar Cells During Photoinduced Burn‐In , 2015 .

[6]  Itaru Osaka,et al.  Efficient inverted polymer solar cells employing favourable molecular orientation , 2015, Nature Photonics.

[7]  P. E. Keivanidis,et al.  The impact of thienothiophene isomeric structures on the optoelectronic properties and photovoltaic performance in quinoxaline based donor–acceptor copolymers , 2015 .

[8]  T. Xu,et al.  Mechanistic Studies of Effect of Dispersity on the Photovoltaic Performance of PTB7 Polymer Solar Cells , 2015 .

[9]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[10]  Tobin J Marks,et al.  Imide- and amide-functionalized polymer semiconductors. , 2014, Chemical reviews.

[11]  Weiwei Li,et al.  Homocoupling defects in diketopyrrolopyrrole-based copolymers and their effect on photovoltaic performance. , 2014, Journal of the American Chemical Society.

[12]  John R. Tumbleston,et al.  Controlling Molecular Weight of a High Efficiency Donor‐Acceptor Conjugated Polymer and Understanding Its Significant Impact on Photovoltaic Properties , 2014, Advanced materials.

[13]  Jean M. J. Fréchet,et al.  Controlling Solution‐Phase Polymer Aggregation with Molecular Weight and Solvent Additives to Optimize Polymer‐Fullerene Bulk Heterojunction Solar Cells , 2014 .

[14]  Pichaya Pattanasattayavong,et al.  Influence of the Electron Deficient Co‐Monomer on the Optoelectronic Properties and Photovoltaic Performance of Dithienogermole‐based Co‐Polymers , 2014 .

[15]  Jian Pei,et al.  Roles of Flexible Chains in Organic Semiconducting Materials , 2014 .

[16]  Martin Baumgarten,et al.  Designing pi-conjugated polymers for organic electronics , 2013 .

[17]  Wenping Hu,et al.  25th Anniversary Article: Key Points for High‐Mobility Organic Field‐Effect Transistors , 2013, Advanced materials.

[18]  Robert P. H. Chang,et al.  Polymer solar cells with enhanced fill factors , 2013, Nature Photonics.

[19]  Sonya A. Mollinger,et al.  Photocurrent enhancement from diketopyrrolopyrrole polymer solar cells through alkyl-chain branching point manipulation. , 2013, Journal of the American Chemical Society.

[20]  John R. Tumbleston,et al.  Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends , 2013 .

[21]  Jin-Hu Dou,et al.  Influence of Alkyl Chain Branching Positions on the Hole Mobilities of Polymer Thin‐Film Transistors , 2012, Advanced materials.

[22]  M. Köse.  Evaluation of acceptor strength in thiophene coupled donor-acceptor chromophores for optimal design of organic photovoltaic materials. , 2012, The journal of physical chemistry. A.

[23]  A. Jen,et al.  Improved Charge Transport and Absorption Coefficient in Indacenodithieno[3,2‐b]thiophene‐based Ladder‐Type Polymer Leading to Highly Efficient Polymer Solar Cells , 2012, Advanced materials.

[24]  Klaus Müllen,et al.  Design strategies for organic semiconductors beyond the molecular formula. , 2012, Nature chemistry.

[25]  Jean-Luc Brédas,et al.  Donor-Acceptor Copolymers of Relevance for Organic Photovoltaics: A Theoretical Investigation of the Impact of Chemical-Structure Modifications on the Electronic and Optical Properties , 2012 .

[26]  D. Beljonne,et al.  Structural correlations in the generation of polaron pairs in low-bandgap polymers for photovoltaics , 2012, Nature Communications.

[27]  C. Chochos,et al.  3,6‐Dialkylthieno[3,2‐b]thiophene moiety as a soluble and electron donating unit preserving the coplanarity of photovoltaic low band gap copolymers , 2012 .

[28]  Peter Bäuerle,et al.  Small molecule organic semiconductors on the move: promises for future solar energy technology. , 2012, Angewandte Chemie.

[29]  K. Schanze,et al.  It takes more than an imine: the role of the central atom on the electron-accepting ability of benzotriazole and benzothiadiazole oligomers. , 2012, Journal of the American Chemical Society.

[30]  T. Koganezawa,et al.  Drastic Change of Molecular Orientation in a Thiazolothiazole Copolymer by Molecular‐Weight Control and Blending with PC61BM Leads to High Efficiencies in Solar Cells , 2012, Advanced materials.

[31]  C. Chochos,et al.  Optimization of the side-chain density to improve the charge transport and photovoltaic performances of a low band gap copolymer , 2012 .

[32]  J. Fréchet,et al.  Molecular design and ordering effects in π-functional materials for transistor and solar cell applications. , 2011, Journal of the American Chemical Society.

[33]  Stelios A. Choulis,et al.  How the structural deviations on the backbone of conjugated polymers influence their optoelectronic properties and photovoltaic performance , 2011 .

[34]  J. D. Mello,et al.  Indacenodithiophene-co-benzothiadiazole Copolymers for High Performance Solar Cells or Transistors via Alkyl Chain Optimization , 2011 .

[35]  J. Moon,et al.  End‐Capping Effect of a Narrow Bandgap Conjugated Polymer on Bulk Heterojunction Solar Cells , 2011, Advanced materials.

[36]  I. Osaka,et al.  Impact of isomeric structures on transistor performances in naphthodithiophene semiconducting polymers. , 2011, Journal of the American Chemical Society.

[37]  David Gendron,et al.  New conjugated polymers for plastic solar cells , 2011 .

[38]  Luping Yu,et al.  Stille polycondensation for synthesis of functional materials. , 2011, Chemical reviews.

[39]  Antonio Facchetti,et al.  π-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications† , 2011 .

[40]  D. Anokhin,et al.  Impact of the Alkyl Side Chains on the Optoelectronic Properties of a Series of Photovoltaic Low-Band-Gap Copolymers , 2010 .

[41]  Alberto Salleo,et al.  Unconventional Face‐On Texture and Exceptional In‐Plane Order of a High Mobility n‐Type Polymer , 2010, Advanced materials.

[42]  Wei You,et al.  Quantitatively Analyzing the Influence of Side Chains on Photovoltaic Properties of Polymer−Fullerene Solar Cells , 2010 .

[43]  K. Müllen,et al.  Backbone Curvature in Polythiophenes , 2010 .

[44]  J. Nelson,et al.  Recombination in Annealed and Nonannealed Polythiophene/Fullerene Solar Cells: Transient Photovoltage Studies versus Numerical Modeling , 2010 .

[45]  Guillermo C Bazan,et al.  Streamlined microwave-assisted preparation of narrow-bandgap conjugated polymers for high-performance bulk heterojunction solar cells. , 2009, Nature chemistry.

[46]  R. J. Kline,et al.  Semiconducting Thienothiophene Copolymers: Design, Synthesis, Morphology, and Performance in Thin‐Film Organic Transistors , 2009 .

[47]  Jean Roncali,et al.  Molecular Engineering of the Band Gap of π-Conjugated Systems: Facing Technological Applications , 2007 .

[48]  K. Müllen,et al.  Oligomers and Polymers Based on Bridged Phenylenes as Electronic Materials , 2007 .

[49]  Jean Roncali,et al.  Triphenylamine-thienylenevinylene hybrid systems with internal charge transfer as donor materials for heterojunction solar cells. , 2006, Journal of the American Chemical Society.