A Physically Reconfigurable Structurally Embedded Vascular Antenna

This paper discusses the fabrication, operation, and physical reconfiguration of a structurally embedded vascular antenna. The antenna is a thin-wire dipole that meanders with rotational symmetry according to a sinusoid with power-series growth. It is formed from two curvilinear vascular networks embedded into a structural composite panel and connected to a conductive vertical interconnect structure and SubMiniature Version A-connected parallel-strip transmission line for excitation and measurement. The pressure-driven flow of a liquid metal alloy within the vascular network enables the physical reconfiguration of the meandering dipole with the primary goal of dynamically tuning the matched impedance bandwidth of the fundamental dipole mode by symmetrically lengthening the conductive pathways forming the dipole. Details regarding the design, fabrication, simulation, and measurement of the meandering dipole antenna are provided along with a linearly expanding dipole for comparison.

[1]  Jayanth N. Kudva,et al.  Development of a structurally integrated conformal load-bearing multifunction antenna: overview of the Air Force Smart Skin Structures Technology Demonstration Program , 1996, Smart Structures.

[2]  Jonathan H. Dang,et al.  Liquid-metal frequency-reconfigurable slot antenna using air-bubble actuation , 2015 .

[3]  Gokhan Mumcu,et al.  Microfluidically Reconfigured Wideband Frequency-Tunable Liquid-Metal Monopole Antenna , 2016, IEEE Transactions on Antennas and Propagation.

[4]  R. Jakoby,et al.  Beam Steering Transmitarray Using Tunable Frequency Selective Surface With Integrated Ferroelectric Varactors , 2012, IEEE Transactions on Antennas and Propagation.

[5]  G. Lazzi,et al.  Flexible Liquid Metal Alloy (EGaIn) Microstrip Patch Antenna , 2012, IEEE Transactions on Antennas and Propagation.

[6]  Jayanth N. Kudva,et al.  Conformal load-bearing antenna structures (CLAS): initiative for multiple military and commercial applications , 1997, Smart Structures.

[7]  Jin Huang,et al.  Electromechanical co-design and experiment of structurally integrated antenna , 2015 .

[8]  Gregory H. Huff,et al.  Analysis and characterization of structurally embedded vascular antennas using liquid metals , 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[9]  Kangwook Kim,et al.  Frequency tunable liquid metal planar inverted-F antenna , 2016 .

[10]  Gabriel M. Rebeiz,et al.  Switchable low-loss RF MEMS Ka-band frequency-selective surface , 2004, IEEE Transactions on Microwave Theory and Techniques.

[11]  Gregory H. Huff,et al.  Frequency reconfigurable patch antenna using liquid metal as switching mechanism , 2013 .

[12]  Abdel-Razik Sebak,et al.  Reinforced Continuous Carbon-Fiber Composites Using Multi-Wall Carbon Nanotubes for Wideband Antenna Applications , 2010, IEEE Transactions on Antennas and Propagation.

[13]  Min-Sung Kim,et al.  Structural design and development of multiband aero-vehicle smart skin antenna , 2014 .

[14]  Jayanth N. Kudva,et al.  Design and development of a conformal load-bearing smart skin antenna: overview of the AFRL Smart Skin Structures Technology Demonstration (S3TD) , 1999, Smart Structures.

[15]  Woonbong Hwang,et al.  Design of load-bearing antenna structures by embedding technology of microstrip antenna in composite sandwich structure , 2005 .

[16]  G.M. Coutts,et al.  Microelectromechanical Systems Tunable Frequency-Selective Surfaces and Electromagnetic-Bandgap Structures on Rigid-Flex Substrates , 2008, IEEE Transactions on Microwave Theory and Techniques.

[17]  J. Volakis,et al.  Embroidered Conductive Fibers on Polymer Composite for Conformal Antennas , 2012, IEEE Transactions on Antennas and Propagation.

[18]  Lan Yao,et al.  Fabrication and characterization of microstrip array antennas integrated in the three dimensional orthogonal woven composite , 2011 .

[19]  Mohammod Ali,et al.  A Broadband High-Gain Bi-Layer LPDA for UHF Conformal Load-Bearing Antenna Structures (CLASs) Applications , 2015, IEEE Transactions on Antennas and Propagation.

[20]  Y. Rahmat-Samii,et al.  Magnetic MEMS reconfigurable frequency-selective surfaces , 2006, Journal of Microelectromechanical Systems.

[21]  Manny Urcia,et al.  Structurally integrated phased arrays , 2011, 2011 Aerospace Conference.

[22]  Woonbong Hwang,et al.  Design and Fabrication of Composite Smart Structures with High Electric and Mechanical Performances for Future Mobile Communication , 2004 .

[23]  Y. Rahmat-Samii,et al.  MEMS enabled reconfigurable frequency selective surfaces: design, simulation, fabrication, and measurement , 2002, IEEE Antennas and Propagation Society International Symposium (IEEE Cat. No.02CH37313).

[24]  A. Mahanfar,et al.  A Reconfigurable Patch Antenna Using Liquid Metal Embedded in a Silicone Substrate , 2011, IEEE Transactions on Antennas and Propagation.

[25]  L. Jofre,et al.  Circular Beam-Steering Reconfigurable Antenna With Liquid Metal Parasitics , 2012, IEEE Transactions on Antennas and Propagation.

[26]  J. Volakis,et al.  Polymer-Carbon Nanotube Sheets for Conformal Load Bearing Antennas , 2010, IEEE Transactions on Antennas and Propagation.

[27]  D. Staiculescu,et al.  A novel hybrid electrical/mechanical optimization technique using time-domain modeling, finite element method and statistical tools for co-design and optimization of RF-integrated mechanical structures: Research Articles , 2008 .

[28]  Cyrus Shafai,et al.  X-Band Tunable Frequency Selective Surface Using MEMS Capacitive Loads , 2015, IEEE Transactions on Antennas and Propagation.