Femtosecond fiber laser welding of PMMA

Femtosecond-pulsed laser welding of transparent materials on a micrometer scale is a versatile tool for the fabrication and assembly of electronic, electromechanical, and especially biomedical micro-devices. In this paper, we report on microwelding of two transparent layers of polymethyl methacrylate (PMMA) with femtosecond laser pulses at 1030 nm in the MHz regime. We aim at exploiting localized heat accumulation to weld the two layers without any preprocessing of the sample and any intermediate absorbing media, by focusing fs-laser pulses at the interface. The modifications produced by the focused laser beam into the bulk material have been firstly investigated depending on the laser process parameters aiming to produce continuous melting. Results have been evaluated based on heat accumulation models. Finally, fs-laser welding of PMMA samples have been successfully demonstrated and tested by leakage tests for application in direct laser assembly of microfluidic devices.

[1]  D. DeVoe,et al.  Bonding of thermoplastic polymer microfluidics , 2009 .

[2]  Saulius Juodkazis,et al.  High 90% efficiency Bragg gratings formed in fused silica by femtosecond Gauss-Bessel laser beams , 2013 .

[3]  Kazuyoshi Itoh,et al.  Density characterization of femtosecond laser modification in polymers , 2008 .

[4]  Arunanshu S. Kuar,et al.  Experimental investigation on laser transmission welding of PMMA to ABS via response surface modeling , 2012 .

[5]  Saulius Juodkazis,et al.  Laser-matter interaction in the bulk of a transparent solid: confined microexplosion and void formation , 2006 .

[6]  A. Tünnermann,et al.  Bonding of glass with femtosecond laser pulses at high repetition rates , 2011 .

[7]  K. Itoh,et al.  Laser micro-welding of transparent materials by a localized heat accumulation effect using a femtosecond fiber laser at 1558 nm. , 2006, Optics express.

[8]  E. Mazur,et al.  Ultrafast-laser driven micro-explosions in transparent materials , 1997 .

[9]  Roberto Osellame,et al.  Micromachining of photonic devices by femtosecond laser pulses , 2008 .

[10]  J. Limpert,et al.  High speed laser drilling of metals using a high repetition rate, high average power ultrafast fiber CPA system. , 2008, Optics express.

[11]  Roberta Ramponi,et al.  Surface properties of femtosecond laser ablated PMMA. , 2010, ACS applied materials & interfaces.

[12]  P. Berger,et al.  Heat accumulation during pulsed laser materials processing. , 2014, Optics express.

[13]  Andreas Tünnermann,et al.  Optical properties of waveguides fabricated in fused silica by femtosecond laser pulses. , 2002, Applied optics.

[14]  Andreas Tünnermann,et al.  Formation of periodic disruptions induced by heat accumulation of femtosecond laser pulses. , 2013, Optics express.

[15]  R. Osellame,et al.  Femtosecond laser micromachining : photonic and microfluidic devices in transparent materials , 2012 .

[16]  M. Richardson,et al.  Welding of polymers using a 2 μm thulium fiber laser , 2012 .

[17]  Masud Mansuripur,et al.  Femtosecond pulsed laser micromachining of glass substrates with application to microfluidic devices. , 2004, Applied optics.

[18]  G. Dearden,et al.  High-speed uniform parallel 3D refractive index micro-structuring of poly(methyl methacrylate) for volume phase gratings , 2010 .

[19]  Marco Rasponi,et al.  Reliable magnetic reversible assembly of complex microfluidic devices: fabrication, characterization, and biological validation , 2011 .

[20]  J. Nishii,et al.  Space-selective laser joining of dissimilar transparent materials using femtosecond laser pulses , 2006 .

[21]  T. Choi,et al.  Liquid-assisted femtosecond laser drilling of straight and three-dimensional microchannels in glass , 2004 .

[22]  Boris N. Chichkov,et al.  Femtosecond laser ablation of polymeric substrates for the fabrication of microfluidic channels , 2011 .

[23]  J. Nishii,et al.  Welding of Transparent Materials Using Femtosecond Laser Pulses , 2005 .

[24]  A. Boglea,et al.  Fibre laser welding for packaging of disposable polymeric microfluidic-biochips , 2007 .

[25]  H. Becker,et al.  Polymer microfluidic devices. , 2002, Talanta.