Preliminary studies of vertical acceleration of a passenger car passing through the speed bump for various driving speeds

The article proposes a phenomenological model of a passenger car. The model includes the biomechanical model of human bodies in the sitting position of Muksian and Nash acting as passengers, while the driver’s weight has been reduced to the concentrated weight of the loading seat. The research carried out in this study consisted of passing the vehicle through a transverse obstacle along the so-called speed bump. Vehicle passes through the threshold at three different speeds: 10km/h, 20km/h, and 30km/h. The purpose of the conducted experiments was to initially estimate the values of accelerations acting especially on the passenger at selected driving speeds. On the basis of conducted tests, it was possible to verify the numerical model of the vehicle overcoming the obstacle on the road. This approach allows the use of the proposed model to verify the forces and accelerations affecting the passenger, specified before any selected specific biomechanical model of the human person, for example, a model of pregnant women in this configuration allows us to estimate the forces and accelerations acting on the embryo while overcoming some obstacles on the road.

[1]  Anirban C. Mitra,et al.  Validation of Simulation and Analytical Model of Nonlinear Passive Vehicle Suspension System for Quarter Car , 2018 .

[2]  Amir Amini,et al.  Robust fixed-order dynamic output feedback controller design for nonlinear uncertain suspension system , 2016 .

[3]  Mechatronic Basis MODELING THE VERTICAL DYNAMICS OF A CAR ON AN , 2015 .

[4]  Seung-Bok Choi,et al.  VIBRATION CONTROL OF A SEMI-ACTIVE SUSPENSION FEATURING ELECTRORHEOLOGICAL FLUID DAMPERS , 2000 .

[5]  P. Chróst,et al.  Modelowanie dynamiki pionowej samochodu osobowego w ujęciu mechatronicznym , 2015 .

[6]  Roberto Spinola Barbosa,et al.  Vehicle dynamic response due to pavement roughness , 2011 .

[7]  Anil Shirahatt,et al.  Optimal Design of Passenger Car Suspension for Ride and Road , 2008 .

[8]  Niels Henze,et al.  The Effect of Road Bumps on Touch Interaction in Cars , 2018, AutomotiveUI.

[9]  Cho-Chung Liang,et al.  A study on biodynamic models of seated human subjects exposed to vertical vibration , 2006 .

[10]  А.В. Сладковский,et al.  Исследование динамического взаимодействия в контакте колесо — рельс при наличии ползунов на колёсной паре , 2008 .

[11]  Mohammed Bani Younis,et al.  Effect of Mechanical Vibrations on Human Body , 2016 .

[12]  W Qassem,et al.  Model prediction of vibration effects on human subject seated on various cushions. , 1996, Medical engineering & physics.

[13]  Jung-Shan Lin,et al.  Road-adaptive algorithm design of half-car active suspension system , 2010, Expert Syst. Appl..

[14]  Devdutt Singh Passenger body vibration control in active quarter car model using ANFIS based super twisting sliding mode controller , 2018, Simul. Model. Pract. Theory.

[15]  A J Nedzesky,et al.  A COMPARATIVE STUDY OF SPEED HUMPS, SPEED SLOTS AND SPEED CUSHIONS , 2004 .

[16]  Galal Ali Hassaan Car Dynamics using Quarter Model and Passive Suspension, Part I: Effect of Suspension Damping and Car Speed , 2014 .

[17]  Anirban C. Mitra,et al.  Development of Linear and Non-linear Vehicle Suspension Model , 2018 .

[18]  Ossama B. Abouelatta,et al.  Optimal Seat and Suspension Design for a Half-Car with Driver Model Using Genetic Algorithm , 2013 .

[19]  C. Warren,et al.  Biodynamics of the human body under whole-body vibration: Synthesis of the reported data , 2010 .

[20]  K. Parczewski,et al.  Effect of tyre inflation preassure on the vehicle dynamics during braking manouvre , 2013 .

[21]  John P. Braaksma,et al.  TOWARDS A NORTH AMERICAN GEOMETRIC DESIGN STANDARD FOR SPEED HUMPS , 2000 .