论文信息 - The impact of different stator and rotor slot number combinations on iron losses of a three-phase induction motor at no-load

The impact of different stator and rotor slot number combinations on iron losses of a three-phase induction motor at no-load

Abstract The electromechanical characteristics of induction motors depend on the used stator and rotor slot combination. The correlation between the usage of different stator and rotor slot number combinations, magnetic flux density distributions, no-load iron losses and rated load winding over-temperatures for a specific induction motor is presented. The motor's magnetic field was analyzed by traces of the magnetic flux density vector, obtained by FEM. Post-processing of FE magnetic field solution was used for posterior iron loss calculation of the motor iron loss at no-load. The examined motor stator lamination had 36 semi-closed slots and the rotor laminations had 28, 33, 34, 44 and 46 semi-closed slots.

[1] Bojan Štumberger,et al. Accuracy of iron loss estimation in induction motors by using different iron loss models , 2004 .

[2] Gorazd Štumberger,et al. Accuracy of iron loss calculation in electrical machines by using different iron loss models , 2003 .

[3] F. Fiorillo,et al. Rotational and alternating energy loss VS. magnetizing frequency in SiFe laminations , 1990 .

[4] Javier Martinez-Roman,et al. Critical review of the analytical approaches accounting for interbar currents and experimental study of ageing in two-speed asynchronous motors for elevator drives , 2005 .

[5] Jianguo Zhu,et al. Improved formulations for rotational core losses in rotating electrical machines , 1998 .

[6] S. Štefanko,et al. Stray losses due to inter-bar currents of skewed cage induction motors at no-load , 2000 .

[7] J. Zhu,et al. Characteristics of AP bias in spin valve memory elements , 1998 .

[8] F. Fiorillo,et al. An improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform , 1990 .

[9] G. Bertotti. General properties of power losses in soft ferromagnetic materials , 1988 .