Analysis and prediction of printable bridge length in fused deposition modelling based on back propagation neural network

ABSTRACT In recent years, additive manufacturing has been developing rapidly mainly due to the ease of fabricating complex components. However, complex structures with overhangs inevitably require support materials to prevent collapse and reduce warping of the part. In this paper, the effects of process parameters on printable bridge length (PBL) are investigated. An optimisation is conducted to maximise the distance between support points, thus minimising the support usage. The orthogonal design method is employed for designing the experiments. The samples are then used to train a neural network for predicting the nonlinear relationships between PBL and process parameters. The results show that the established neural network can correctly predict the longest PBL which can be integrated into support generation process in additive manufacturing for maximising the distance between support points, thus reducing support usage. A framework for integrating the findings of this paper into support generation process is proposed.

[1]  Xun Xu,et al.  Support Structures for Additive Manufacturing: A Review , 2018, Journal of Manufacturing and Materials Processing.

[2]  Yong He,et al.  Optimization of process planning for reducing material consumption in additive manufacturing , 2017 .

[3]  Jack Howarth,et al.  A design of experiments approach for the optimisation of energy and waste during the production of parts manufactured by 3D printing , 2016 .

[4]  Guoying Dong,et al.  Data for: Optimizing Process Parameters of Fused Deposition Modeling by Taguchi Method for the Fabrication of Lattice Structures , 2018 .

[5]  Yong He,et al.  A non-retraction path planning approach for extrusion-based additive manufacturing , 2017 .

[6]  Yiwei Weng,et al.  Design 3D Printing Cementitious Materials Via Fuller Thompson Theory and Marson-Percy Model , 2018, 3D Concrete Printing Technology.

[7]  Xun Xu,et al.  A benchmarking part for evaluating and comparing support structures of additive manufacturing , 2018 .

[8]  David L. Bourell,et al.  History and Evolution of Additive Manufacturing , 2020, Additive Manufacturing Processes.

[9]  Jingchao Jiang,et al.  Effect of support on printed properties in fused deposition modelling processes , 2019, Virtual and Physical Prototyping.

[10]  Anbang Liu,et al.  An optimization approach for path planning of high-quality and uniform additive manufacturing , 2017 .

[11]  David W. Rosen,et al.  Research supporting principles for design for additive manufacturing , 2014 .

[12]  Yijun Liu,et al.  Small and multi-peak nonlinear time series forecasting using a hybrid back propagation neural network , 2018, Inf. Sci..

[13]  Robert G. Landers,et al.  Modeling and analysis of paste freezing in freeze-form extrusion fabrication of thin-wall parts via a lumped method , 2016 .

[14]  Xun Xu,et al.  A weighted rough set based fuzzy axiomatic design approach for the selection of AM processes , 2017 .

[15]  Ibrahim Kucukkoc,et al.  A lightweight and support-free design method for selective laser melting , 2017 .

[16]  Sam Anand,et al.  Part Build Orientation Optimization and Neural Network-Based Geometry Compensation for Additive Manufacturing Process , 2018 .

[17]  Shu Beng Tor,et al.  Process parameter optimization and mechanical properties for additively manufactured stainless steel 316L parts by selective electron beam melting , 2018, Materials & Design.

[18]  Omar Ahmed Mohamed,et al.  Optimization of fused deposition modeling process parameters for dimensional accuracy using I-optimality criterion , 2016 .

[19]  B. J. Alvarez,et al.  Dimensional accuracy improvement of FDM square cross-section parts using artificial neural networks and an optimization algorithm , 2013 .

[20]  Kamran Mumtaz,et al.  A Method to Eliminate Anchors/Supports from Directly Laser Melted Metal Powder Bed Processes , 2011 .

[21]  Sadegh Rahmati,et al.  Improvement of FDM parts’ surface quality using optimized neural networks – medical case studies , 2017 .

[22]  Mattia Bellotti,et al.  Warpage of FDM parts , 2018 .

[23]  James K. Guest,et al.  Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design , 2016 .

[24]  Ram Devireddy,et al.  Design and Fabrication of a Low-Cost Three-Dimensional Bioprinter. , 2017, Journal of medical devices.

[25]  Martin Leary,et al.  Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structures , 2014 .

[26]  Kelsey Phelan,et al.  Mechanical Strength of 3-D Printed Filaments , 2016, 2016 32nd Southern Biomedical Engineering Conference (SBEC).

[27]  A. Armillotta,et al.  Warpage of FDM parts: Experimental tests and analytic model , 2020 .

[28]  Andres Tovar,et al.  Design of Self-Supported 3D Printed Parts for Fused Deposition Modeling , 2016 .

[29]  Brandon R. Brown,et al.  Orthogonal Design: A Powerful Method for Comparative Effectiveness Research with Multiple Interventions. Princeton, NJ: Mathematica Policy Research , 2012 .

[30]  Sam Anand,et al.  Artificial Neural Network Based Geometric Compensation for Thermal Deformation in Additive Manufacturing Processes , 2016 .

[31]  Yuanyuan Liu,et al.  Optimization of Process Parameters for Biological 3D Printing Forming Based on BP Neural Network and Genetic Algorithm , 2014, ISPE CE.

[32]  Syed H. Masood,et al.  Influence of processing parameters on creep and recovery behavior of FDM manufactured part using definitive screening design and ANN , 2017 .

[33]  David Rejeski,et al.  Research needs and recommendations on environmental implications of additive manufacturing , 2018 .

[34]  Yong He,et al.  Modeling and process planning for curved layer fused deposition , 2017 .

[35]  Richard M. Everson,et al.  A new approach to the design and optimisation of support structures in additive manufacturing , 2013 .

[36]  Ray Y. Zhong,et al.  Investigation of printable threshold overhang angle in extrusion-based additive manufacturing for reducing support waste , 2018, Int. J. Comput. Integr. Manuf..

[37]  Alain Bernard,et al.  Build orientation optimization for multi-part production in additive manufacturing , 2017, J. Intell. Manuf..

[38]  JiangJingchao,et al.  Support Optimization for Flat Features via Path Planning in Additive Manufacturing , 2019, 3D Printing and Additive Manufacturing.

[39]  Yiwei Weng,et al.  Printability and fire performance of a developed 3D printable fibre reinforced cementitious composites under elevated temperatures , 2018, Virtual and Physical Prototyping.

[40]  Sadegh Rahmati,et al.  Application of an RBF neural network for FDM parts’ surface roughness prediction for enhancing surface quality , 2016, International Journal of Precision Engineering and Manufacturing.

[41]  Zhe George Zhang,et al.  Forecasting stock indices with back propagation neural network , 2011, Expert Syst. Appl..

[42]  Clément Gosselin,et al.  Weak support material techniques for alternative additive manufacturing materials , 2015 .