Double Directional Channel Characterization on Board Ships

Due to the metallic structure of decks, bulkheads and watertight (WT) doors, wireless communications are a serious challenge in the particular environment of ships. In order to deploy reliable shipboard wireless networks, wireless devices (access points, routers, sensor nodes, etc.) must be located at strategic locations ensuring full radio coverage and network connectivity. Strategic locations can be determined from the identification of the main propagation directions of electromagnetic (EM) waves within a ship. This paper presents the results of a radio propagation measurement campaign performed on board a ship. A dual-band Multiple-Input Multiple-Output (MIMO) channel sounder and antenna arrays have been used. Measurement data have been processed with a classic beamforming technique and a high resolution algorithm to extract dominant paths. A ray-tracing based simulation tool has been used to understand measurement results. Obtained results are used for optimal placement of radio devices when deploying shipboard wireless networks.

[1]  Dongkon Lee,et al.  Characteristics of wireless sensor network for full-scale ship application , 2009 .

[2]  Andrea Mariscotti,et al.  On the propagation of wireless signals on board ships , 2010, 2010 IEEE Instrumentation & Measurement Technology Conference Proceedings.

[3]  Gheorghe Zaharia,et al.  Double directional characterisation of radio wave propagation through metallic watertight doors on board ships , 2012 .

[4]  Tobias Pilsak,et al.  WLAN propagation on the bridge of vessels under consideration of material properties , 2009, 2009 International Symposium on Electromagnetic Compatibility - EMC Europe.

[5]  G. Grunfelder,et al.  A Dual Band MIMO Channel Sounder at 2.2 and 3.5 GHz , 2008, 2008 IEEE Instrumentation and Measurement Technology Conference.

[6]  Alain Sibille,et al.  A deterministic indoor UWB space-variant multipath radio channel modelling compared to measurements on basic configurations , 2006, 2006 First European Conference on Antennas and Propagation.

[7]  Paolo Barsocchi,et al.  Accuracy limits of in-room localisation using RSSI , 2009, 2009 IEEE Antennas and Propagation Society International Symposium.

[8]  G. Grunfelder,et al.  Wideband outdoor-to-indoor MIMO channel measurements at 3.5 GHz , 2009, 2009 3rd European Conference on Antennas and Propagation.

[9]  G. Grunfelder,et al.  Measurements and path loss models for shipboard environments at 2.4 GHz , 2011, 2011 41st European Microwave Conference.

[10]  Jerome P. Lynch,et al.  A summary review of wireless sensors and sensor networks for structural health monitoring , 2006 .

[11]  Klaus I. Pedersen,et al.  Channel parameter estimation in mobile radio environments using the SAGE algorithm , 1999, IEEE J. Sel. Areas Commun..

[12]  Thad Welch,et al.  Shipboard radio frequency propagation measurements for wireless networks , 2001, 2001 MILCOM Proceedings Communications for Network-Centric Operations: Creating the Information Force (Cat. No.01CH37277).

[13]  Adhir K Basu,et al.  Introduction to Stochastic Process , 2002 .

[14]  L. Breuer.  Introduction to Stochastic Processes , 2022, Statistical Methods for Climate Scientists.