The potential of stop band material in multi-frequency ultrasonic transducers

Abstract Ultrasonic transducers play a major role in surround sensing for automotive and industrial applications. The development of autonomous driving functions is one of the top challenges for mobility solutions of the 21st century. In this context, surround sensing systems with high performance serve as a key enabler. This leads to an increasing number of sensors which are desired to operate in parallel or in shorter intervals. Hence, measurements should be conducted with two different frequencies to discriminate the sensor signals. Known multi-frequency ultrasonic transducers mostly employ multiple electro-mechanical coupling elements which require more complex sensor electronics. To overcome this issue, the authors present a study on multi-frequency ultrasonic transducers using only one electro-mechanical coupling element. In order to achieve suitable sound radiation properties at two well separated operating frequencies, spatially distributed stop band material is employed. As a result, the operational deflection shape can be controlled at a certain frequency. In finite element simulation, the relation between spatially distributed stop band material and the resulting operational deflection shapes is investigated. The sound radiation behavior is estimated using the numerical results from a harmonic analysis as input for the Rayleigh integral. In experimental investigations, the presented approach is validated. Finite element simulation and experimental testing show good accordance. Based on the results of the presented study, it is possible to realize a multi-frequency ultrasonic sensor with one electro-mechanical transducer element only and suitable sound radiation behavior at multiple operating frequencies.

[1]  Wim Desmet,et al.  Probability that a band-gap extremum is located on the irreducible Brillouin-zone contour for the 17 different plane crystallographic lattices , 2017 .

[2]  Hui Zhao,et al.  Membrane-constrained acoustic metamaterials for low frequency sound insulation , 2016 .

[3]  B. Mace,et al.  Modelling wave propagation in two-dimensional structures using finite element analysis , 2008 .

[4]  Wen-Jong Wu,et al.  Highly anisotropic beam patterns for a pot-like ultrasonic sensor with penetrating slots configuration , 2009, 2009 IEEE International Ultrasonics Symposium.

[5]  Yuesheng Wang,et al.  Propagation of bending waves in phononic crystal thin plates with a point defect , 2009 .

[6]  Wim Desmet,et al.  Numerical and experimental study of the effect of microslits on the normal absorption of structural metamaterials , 2016 .

[7]  Chengkuo Lee,et al.  Electrically switchable multi-frequency piezoelectric micromachined ultrasonic transducer (pMUT) , 2016, 2016 IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS).

[8]  Robin S. Langley,et al.  A note on the force boundary conditions for two-dimensional periodic structures with corner freedoms , 1993 .

[9]  SPICE modeling of hybrid multi-frequency ultrasound transducer , 2011 .

[10]  M. Möser,et al.  Engineering Acoustics: An Introduction to Noise Control , 2004 .

[11]  X. Wen,et al.  Flexural wave band gaps in locally resonant thin plates with periodically attached spring–mass resonators , 2012 .

[12]  Wim Desmet,et al.  On the acoustic radiation efficiency of local resonance based stop band materials , 2014 .

[13]  S. Marburg.  Developments in structural-acoustic optimization for passive noise control , 2002 .

[14]  Wim Desmet,et al.  A lightweight vibro-acoustic metamaterial demonstrator: Numerical and experimental investigation , 2016 .

[15]  L. Brillouin.  Wave propagation in periodic structures : electric filters and crystal lattices , 1953 .

[16]  S. Marburg,et al.  Reducing mechanical cross-coupling in phased array transducers using stop band material as backing , 2018, Journal of Sound and Vibration.

[17]  M. Hooker.  Properties of PZT-Based Piezoelectric Ceramics Between-150 and 250°C , 1998 .

[18]  Changhe Sun,et al.  A novel single-element dual-frequency ultrasound transducer for image-guided precision medicine , 2017, 2017 IEEE International Ultrasonics Symposium (IUS).

[19]  Badreddine Assouar,et al.  Acoustic metamaterials for sound mitigation , 2016 .

[20]  Jihong Wen,et al.  Sound transmission loss of metamaterial-based thin plates with multiple subwavelength arrays of attached resonators , 2012 .

[21]  Jari Juuti,et al.  Characterization and modelling of 3D piezoelectric ceramic structures with ATILA software , 2005 .

[22]  Leping Feng,et al.  Reduction of the sound transmission of a periodic sandwich plate using the stop band concept , 2015 .

[23]  M. Bronskill,et al.  Multifrequency ultrasound transducers for conformal interstitial thermal therapy , 2003, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[24]  Philippe Roux,et al.  Experimental demonstration of ordered and disordered multiresonant metamaterials for lamb waves. , 2014, Physical review letters.

[25]  Steffen Marburg,et al.  More Than Six Elements Per Wavelength: The Practical Use of Structural Finite Element Models and Their Accuracy in Comparison with Experimental Results , 2017 .

[26]  P. Sheng,et al.  Locally resonant sonic materials , 2000, Science.

[27]  Gary H. Koopmann,et al.  Designing Quiet Structures: A Sound Power Minimization Approach , 1997 .

[28]  Wim Desmet,et al.  On the potential of tuned resonators to obtain low-frequency vibrational stop bands in periodic panels , 2013 .

[29]  Steffen Marburg,et al.  Estimation of Radiated Sound Power: A Case Study on Common Approximation Methods , 2009 .

[30]  Roger J. Zemp,et al.  Self and Mutual Radiation Impedances for Modeling of Multi-Frequency CMUT Arrays , 2016, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[31]  L. Cremaldi,et al.  Split-mode ultrasonic transducer. , 2013, The Journal of the Acoustical Society of America.

[32]  Tsung-Tsong Wu,et al.  Waveguiding and frequency selection of Lamb waves in a plate with a periodic stubbed surface , 2009 .

[33]  Massimo Ruzzene,et al.  A general FEM technique to model wave propagation in cellular periodic structures , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.