A non-linear model for the fatigue assessment of notched components under fatigue loadings

Abstract This paper presents a general theory for the estimations of an entire fatigue curve in ductile materials based on the implicit gradient approach. In order to modify the slope of the Woehler curves, the material was considered non-linear. The average stress of the hysteresis loop was taken into account by means of Walker’s model. Subsequently, the implicit gradient method was adopted for the numerical evaluation of the effective stress and strain at low- and medium-cycle fatigue life and was then related to the fatigue strength of the material. The characteristic length, relating to the fatigue behaviour of the material, was considered constant for the fatigue lifetime. In order to confirm the proposed method, new experimental data were obtained, relating to axisymmetric notched specimens loaded with nominal stress ratio R  = −1 and R  = 0. In terms of the effective strain amplitude, evaluated by means of the implicit gradient approach, the different Woehler curves of notched specimens were summarised in a unique fatigue curve as a function of Walker’s cycle parameter.

[1]  E. Aifantis.  Update on a class of gradient theories , 2003 .

[2]  K. N. Smith.  A Stress-Strain Function for the Fatigue of Metals , 1970 .

[3]  Z. Bažant,et al.  Nonlocal damage theory , 1987 .

[4]  R. Tovo,et al.  Numerical Evaluation of Fatigue Strength on Mechanical Notched Components under Multiaxial Loadings , 2011 .

[5]  Ayhan Ince,et al.  A modification of Morrow and Smith–Watson–Topper mean stress correction models , 2011 .

[6]  David Taylor,et al.  Geometrical effects in fatigue: a unifying theoretical model , 1999 .

[7]  R. Tovo,et al.  An implicit gradient application to fatigue of complex structures , 2008 .

[8]  A new approach to the prediction of fatigue notch reduction factor Kf , 1996 .

[9]  David Taylor,et al.  An Elasto-Plastic Reformulation of the Theory of Critical Distances to Estimate Lifetime of Notched Components Failing in the Low/Medium-Cycle Fatigue Regime , 2010 .

[10]  N. Dowling,et al.  Mean stress effects in stress-life fatigue and the Walker equation , 2009 .

[11]  Roberto Tovo,et al.  A numerical approach to fatigue assessment of spot weld joints , 2011 .

[12]  Christina Berger,et al.  Örtliche Bewertung der Schwingfestigkeit von Gewindeverbindungen. –Fatigue analysis of threaded connections using the local strain approach , 2010 .

[13]  Ne Dowling,et al.  Mean stress effects in strain–life fatigue , 2009 .

[14]  Roberto Tovo,et al.  An application of the implicit gradient method to welded structures under multiaxial fatigue loadings , 2009 .

[15]  N. Dowling,et al.  Mechanical Behavior of Materials , 2012 .

[16]  David Taylor,et al.  A novel formulation of the theory of critical distances to estimate lifetime of notched components in the medium-cycle fatigue regime , 2007 .

[17]  Rhj Ron Peerlings,et al.  Gradient enhanced damage for quasi-brittle materials , 1996 .

[18]  R. Tovo,et al.  An implicit gradient type of static failure criterion for mixed-mode loading , 2006 .

[19]  Sheri Sheppard,et al.  Field Effects in Fatigue Crack Initiation: Long Life Fatigue Strength , 1991 .

[20]  Joseph Edward Shigley,et al.  Mechanical engineering design , 1972 .

[21]  D. Bouami,et al.  Notch effect in low cycle fatigue , 1999 .

[22]  D. Kujawski.  A deviatoric version of the SWT parameter , 2014 .

[23]  Roberto Tovo,et al.  The use of the JV parameter in welded joints: Stress analysis and fatigue assessment , 2009 .

[24]  Paolo Livieri,et al.  Use of J-integral to predict static failures in sharp V-notches and rounded U-notches , 2008 .

[25]  G. Pluvinage,et al.  On characteristic lengths used in notch fracture mechanics , 2013, International Journal of Fracture.

[26]  M. E. Haddad,et al.  Fatigue Crack Propagation of Short Cracks , 1979 .

[27]  Zdenek P. Bazant,et al.  Imbricate continuum and its variational derivation , 1984 .

[28]  Filippo Berto,et al.  Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches , 2014 .

[29]  K. Walker.  The Effect of Stress Ratio During Crack Propagation and Fatigue for 2024-T3 and 7075-T6 Aluminum , 1970 .

[30]  Guy Pluvinage,et al.  Application of a new model proposal for fatigue life prediction on notches and key-seats , 1999 .

[31]  J. Collins.  Failure of materials in mechanical design : analysis, prediction, prevention , 1981 .

[32]  K. Chawla,et al.  Mechanical Behavior of Materials , 1998 .

[33]  R. Tovo,et al.  An implicit gradient application to fatigue of sharp notches and weldments , 2007 .

[34]  Cetin Morris Sonsino,et al.  Fatigue assessment of welded joints by local approaches Second edition , 2007 .

[35]  Roberto Tovo,et al.  Fatigue crack initiation and propagation phases near notches in metals with low notch sensitivity , 1997 .

[36]  Mgd Marc Geers,et al.  Validation and internal length scale determination for a gradient damage model: application to short glass-fibre-reinforced polypropylene , 1999 .

[37]  Roberto Tovo,et al.  Implicit gradient and integral average effective stresses: relationships and numerical approximations , 2015 .

[38]  Tim Topper,et al.  NEUBER'S RULE APPLIED TO FATIGUE OF NOTCHED SPECIMENS , 1967 .

[39]  R. Tovo,et al.  The effect of throat underflushing on the fatigue strength of fillet weldments , 2013 .