Development and hybrid force/position control of a compliant rescue manipulator

Abstract Performing search and rescue tasks in the ruins after disasters demand rescue robots with slender and compliant structure to accommodate the complicated configurations under debris. This paper presents the structural design and system composition of a novel tendon-sheath actuated compliant rescue manipulator with slender and flexible body. The proposed robot can drill into the narrow space where rescuers and traditional rigid robots cannot get in because of size limitation or toxic environment. The self-sensing calibration, dynamic modeling, and hybrid force/position control trajectory of the compliant gripper with integrated position and force monitoring capabilities are analyzed and discussed. With the aim of regulating the gripper displacement and clamping force during operation, a hybrid force/position control strategy is proposed based on a cascaded proportional-integral-derivative (PID) controller and a fuzzy sliding mode controller (FSMC). Experimental setups mainly consisting of servo motor, tendon sheath transmission components, compliant gripper, and real-time control system are established to calibrate the strain gauge sensors and identify the dynamic model parameters. Further experimental investigations involving force tracking experiments, position tracking experiments, and object grasping experiments are carried out. The experimental results demonstrate the effectiveness of the developed self-sensing approach and control strategies during rescue operation.

[1]  Qingcong Wu,et al.  Modeling and position control of a therapeutic exoskeleton targeting upper extremity rehabilitation , 2017 .

[2]  J. G. Ziegler,et al.  Optimum Settings for Automatic Controllers , 1942, Journal of Fluids Engineering.

[3]  Wang Xingsong,et al.  Design and 3D reconstruction of a Tendon-Sheath-Driven searching and rescuing robot , 2013, 2013 IEEE International Symposium on Safety, Security, and Rescue Robotics (SSRR).

[4]  Jae-Bok Song,et al.  Safe joint module for safe robot arm based on passive and active compliance method , 2012 .

[5]  Hideyuki Tsukagoshi,et al.  Development of Small Diameter Active Hose-II for Search and Life-prolongation of Victims under Debris , 2003, J. Robotics Mechatronics.

[6]  Riccardo Muradore,et al.  A Review of Algorithms for Compliant Control of Stiff and Fixed-Compliance Robots , 2016, IEEE/ASME Transactions on Mechatronics.

[7]  Kazuyuki Ito,et al.  Development of rescue manipulator to search narrow space for victims , 2008, Artificial Life and Robotics.

[8]  Hung-Chin Jang,et al.  Rescue information system for earthquake disasters based on MANET emergency communication platform , 2009, IWCMC.

[9]  Berno J. E. Misgeld,et al.  Design and control of a mechanical rotary variable impedance actuator , 2016 .

[10]  Logah Perumal,et al.  A new integrated fuzzy bang–bang relay control system , 2009 .

[11]  Guido Herrmann,et al.  Compliance Control and Human-Robot Interaction: Part II - Experimental Examples , 2014, Int. J. Humanoid Robotics.

[12]  S. Hirose,et al.  Development of "Souryu-III" : Connected crawler vehicle for inspection of narrow and winding space , 2003 .

[13]  Paolo Fiorini,et al.  Search and Rescue Robotics , 2008, Springer Handbook of Robotics.

[14]  Qingsong Xu,et al.  Model Predictive Discrete-Time Sliding Mode Control of a Nanopositioning Piezostage Without Modeling Hysteresis , 2012, IEEE Transactions on Control Systems Technology.

[15]  C. L. Philip Chen,et al.  Fuzzy Observed-Based Adaptive Consensus Tracking Control for Second-Order Multiagent Systems With Heterogeneous Nonlinear Dynamics , 2016, IEEE Transactions on Fuzzy Systems.

[16]  Berend Denkena,et al.  Strain gauge based sensing hydraulic fixtures , 2016 .

[17]  Lei Fu,et al.  Development and precision position/force control of a new flexure-based microgripper , 2015 .

[18]  Yoshinori Tanaka,et al.  Development of “Souryu‐IV” and “Souryu‐V:” Serially connected crawler vehicles for in‐rubble searching operations , 2008, J. Field Robotics.

[19]  K. K. Leang,et al.  Integrated Sensing for IPMC Actuators Using Strain Gages for Underwater Applications , 2012, IEEE/ASME Transactions on Mechatronics.

[20]  Clément Gosselin,et al.  A time-domain vibration observer and controller for physical human-robot interaction , 2016 .

[21]  Jonqlan Lin,et al.  Hybrid fuzzy position/force control by adaptive network-based fuzzy inference system for robot manipulator mounted on oscillatory base , 2015 .

[22]  Qingsong Xu.  Design, testing and precision control of a novel long-stroke flexure micropositioning system , 2013 .

[23]  Xingsong Wang,et al.  Inverse Transmission Model and Compensation Control of a Single-Tendon–Sheath Actuator , 2014, IEEE Transactions on Industrial Electronics.

[24]  Qingsong Xu,et al.  Design of a Large-Range Compliant Rotary Micropositioning Stage With Angle and Torque Sensing , 2015, IEEE Sensors Journal.

[25]  Xingsong Wang,et al.  Tip force tracking control based on the tendon-sheath transmission model and 3D reconstruction of a long slender rescue robot , 2016, 2016 IEEE 14th International Workshop on Advanced Motion Control (AMC).

[26]  Wang Kai,et al.  Preliminary Experiments on Soft Manipulating of Tendon-Sheath-Driven Compliant Joints , 2014 .

[27]  Lin Chen,et al.  Transmission Model and Compensation Control of Double-Tendon-Sheath Actuation System , 2015, IEEE Transactions on Industrial Electronics.

[28]  Xing Song Wang,et al.  Design of Automatic Insertion System for a Tendon-Sheath-Driven Searching and Rescuing Robot , 2014 .

[29]  Kar-Keung D. Young.  Controller Design for a Manipulator Using Theory of Variable Structure Systems , 1978, IEEE Transactions on Systems, Man, and Cybernetics.