Imposed Sinusoidal Source and Load Currents for an Indirect Matrix Converter

A new strategy for indirect matrix converters which allows an optimal control of source and load currents is presented in this paper. This method uses the commutation state of the converter in the subsequent sampling time according to an optimization algorithm given by a simple cost functional and the discrete system model. The control goals are regulation of output current according to an arbitrary reference and also a good tracking of the source current to its reference which is imposed to have a sinusoidal waveform with low distortion. Experimental results support the theoretical development.

[1]  José R. Rodríguez,et al.  Predictive Torque Control of Induction Machines Based on State-Space Models , 2009, IEEE Transactions on Industrial Electronics.

[2]  M. Rivera,et al.  Predictive current control with reactive power minimization in an indirect matrix converter , 2010, 2010 IEEE International Conference on Industrial Technology.

[3]  H. Tuusa,et al.  Comparison of Simple Control Strategies of Space-Vector Modulated Indirect Matrix Converter Under Distorted Supply Voltage , 2007, IEEE Transactions on Power Electronics.

[4]  Roberto Cárdenas,et al.  Experimental Validation of a Space-Vector-Modulation Algorithm for Four-Leg Matrix Converters , 2011, IEEE Transactions on Industrial Electronics.

[5]  Sandra McLain.  IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS , 2007 .

[6]  Gang Li,et al.  Analysis and control of input power factor in indirect matrix converter , 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.

[7]  C. Klumpner,et al.  Implementation of a hybrid AC/AC direct power converter with unity voltage transfer ratio , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[8]  Hong-Hee Lee,et al.  An investigation on direct space vector modulation methods for matrix converter , 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.

[9]  M. Rivera,et al.  Predictive torque and flux control of an induction machine fed by an indirect matrix converter with reactive power minimization , 2010, 2010 IEEE International Symposium on Industrial Electronics.

[10]  Stefan Müller,et al.  New time-discrete modulation scheme for matrix converters , 2005, IEEE Transactions on Industrial Electronics.

[11]  U. Ammann,et al.  Model Predictive Control—A Simple and Powerful Method to Control Power Converters , 2009, IEEE Transactions on Industrial Electronics.

[12]  Meng Yeong Lee,et al.  Space-Vector Modulated Multilevel Matrix Converter , 2010, IEEE Transactions on Industrial Electronics.

[13]  Roberto Cárdenas,et al.  A Topology for Multiple Generation System With Doubly Fed Induction Machines and Indirect Matrix Converter , 2009, IEEE Transactions on Industrial Electronics.

[14]  Johann W. Kolar,et al.  Predictive Control of an Indirect Matrix Converter , 2008, IEEE Transactions on Industrial Electronics.

[15]  Hong-Hee Lee,et al.  Input Power Factor Compensation Algorithms Using a New Direct-SVM Method for Matrix Converter , 2011, IEEE Transactions on Industrial Electronics.

[16]  Marian P. Kazmierkowski,et al.  “Predictive control in power electronics and drives” , 2008, 2008 IEEE International Symposium on Industrial Electronics.

[17]  J.W. Kolar,et al.  The essence of three-phase AC/AC converter systems , 2008, 2008 13th International Power Electronics and Motion Control Conference.

[18]  José R. Rodríguez,et al.  Predictive Current Control of an Induction Machine Fed by a Matrix Converter With Reactive Power Control , 2008, IEEE Transactions on Industrial Electronics.

[19]  D.E. Quevedo,et al.  Predictive Current Control Strategy With Imposed Load Current Spectrum , 2008, IEEE Transactions on Power Electronics.

[20]  J.W. Kolar,et al.  Novel Three-Phase AC–AC Sparse Matrix Converters , 2007, IEEE Transactions on Power Electronics.

[21]  Pablo Correa,et al.  A Predictive Control Scheme for Current-Source Rectifiers , 2008, IEEE Transactions on Industrial Electronics.

[22]  Lee Empringham,et al.  Control Design of a Three-Phase Matrix-Converter-Based AC–AC Mobile Utility Power Supply , 2008, IEEE Transactions on Industrial Electronics.

[23]  M. Rivera,et al.  Predictive control of the Indirect Matrix Converter with active damping , 2009, 2009 IEEE 6th International Power Electronics and Motion Control Conference.

[24]  Lee Empringham,et al.  Control and Implementation of a Matrix-Converter-Based AC Ground Power-Supply Unit for Aircraft Servicing , 2010, IEEE Transactions on Industrial Electronics.

[25]  Johann W. Kolar,et al.  Comprehensive comparison of three-phase AC-AC Matrix Converter and Voltage DC-Link Back-to-Back Converter systems , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[26]  Leopoldo G. Franquelo,et al.  Guidelines for weighting factors design in Model Predictive Control of power converters and drives , 2009, 2009 IEEE International Conference on Industrial Technology.

[27]  Erik Schaltz,et al.  Switching Frequency Reduction Using Model Predictive Direct Current Control for High-Power Voltage Source Inverters , 2011, IEEE Transactions on Industrial Electronics.

[28]  Leopoldo García Franquelo,et al.  Model Predictive Control of an Inverter With Output $LC$ Filter for UPS Applications , 2009, IEEE Transactions on Industrial Electronics.

[29]  Pablo Lezana,et al.  Predictive Current Control of a Voltage Source Inverter , 2004, IEEE Transactions on Industrial Electronics.

[30]  Ralph Kennel,et al.  Predictive control in power electronics and drives , 2008, 2008 IEEE International Symposium on Industrial Electronics.