Numerical and experimental analyses of PCM containing sandwich panels for prefabricated walls

Abstract In this paper, a finite element numerical algorithm for the simulation of two-dimensional problems of heat transfer with phase change is validated, comparing the numerical results with the experimental ones deriving from tests carried out on two different kinds of PCM containing sandwich panels. The very good approximation affecting the numerical results, as compared with the experimental ones, suggests that it can be a powerful design tool for every kind of PCM containing building elements. Moreover, four prototypes of PCM containing sandwich panels for prefabricated walls were tested (two of them used to validate the numerical finite element method for design purposes) in a test-room capable of simulating several kinds of outdoor and indoor environmental conditions, aimed at evaluating the energetic performances of such panels, which make them suitable for use in different climatic contexts or in different elements of buildings. The possibility to adapt such basic technology to manufacture panels with several stratifications allows their installation both on ceilings and walls and in several climatic and design contexts.

[1]  J. J. Tomlinson,et al.  Analysis Of Wallboard Containing A Phase Change Material , 1990, Proceedings of the 25th Intersociety Energy Conversion Engineering Conference.

[2]  Minoru Mizuno,et al.  Numerical study on a low energy architecture based upon distributed heat storage system , 2001 .

[3]  R. Kedl.  Conventional Wallboard With Latent Heat Storage For Passive Solar Applications , 1990, Proceedings of the 25th Intersociety Energy Conversion Engineering Conference.

[4]  Roland W. Lewis,et al.  An improved algrorithm for heat conduction problems with phase change , 1978 .

[5]  Emil Wolf,et al.  Principles of Optics: Contents , 1999 .

[6]  Beat Lehmann,et al.  Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings , 2004 .

[7]  T. K. Stovall,et al.  What are the potential benefits of including latent storage in common wallboard , 1995 .

[8]  D. W. Etheridge,et al.  Novel ventilation cooling system for reducing air conditioning in buildings.: Part I: testing and theoretical modelling , 2000 .

[9]  D. Feldman,et al.  Full scale thermal testing of latent heat storage in wallboard , 1996 .

[10]  Douglas C. Hittle,et al.  Modeling Phase Change Materials With Conduction Transfer Functions for Passive Solar Applications , 2003 .

[11]  D. A. Neeper,et al.  Thermal dynamics of wallboard with latent heat storage , 2000 .

[12]  H. Craig Petersen.  Simulation of the impact of financial incentives on solar energy utilization for space conditioning and water heating: 1985 , 1979 .

[13]  Roland W. Lewis,et al.  Finite element solution of non‐linear heat conduction problems with special reference to phase change , 1974 .

[14]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[15]  Uroš Stritih,et al.  Heat transfer enhancement in latent heat thermal storage system for buildings , 2003 .

[16]  K Darkwa,et al.  Simulation of an integrated PCM–wallboard system , 2003 .

[17]  Dorel Feldman,et al.  Latent heat storage in building materials , 1993 .

[18]  Joseph Andrew Clarke,et al.  Numerical modelling and thermal simulation of PCM–gypsum composites with ESP-r , 2004 .