Assessing Work-Related Risk Factors on Low Back Disorders among Roofing Workers.

Roofers have long suffered from low back disorders (LBDs), which are a primary nonfatal injury in construction. Ergonomic studies have identified several risk factors associated with LBDs in workplaces and developed biomechanical models for general LBD risk assessments. However, these models cannot be directly used for assessments in roof workplaces because they are designed for general tasks without considering roofers' posture variance and effects of working on slanted roof surfaces. This paper examined the relationship between roofing work-related factors and LBD risk among roofers using a laboratory assessment. A pitch-configurable wood platform was built to mimic the rooftop. The maximum trunk flexion angle and normalized electromyography (EMG) signals were measured as indicators using a motion capture system and a skeletal muscle signal recording system under different settings, i.e., different roof slopes, postures, facing directions, and working paces. The results indicated the measured factors with significant effects on the LBD development and revealed unfavorable conditions (e.g., using a stooped posture to work on low-pitch rooftops at a fast pace) where the work on rooftops needs particular attention. Such information is useful for systematic understanding of roofing nonfatal LBD developments among construction professionals and may enable development of interventions and guidelines for reducing the prevalence of LBDs at roofing jobsites.

[1]  John R. Moore,et al.  Fatal events in residential roofing , 2014 .

[2]  Boyi Hu,et al.  The changes of lumbar muscle flexion–relaxation response due to laterally slanted ground surfaces , 2013, Ergonomics.

[3]  João Manuel R. S. Tavares,et al.  Surface electromyographic amplitude normalization methods: a review , 2012 .

[4]  Gary A Mirka,et al.  The effect of sinusoidal rolling ground motion on lifting biomechanics. , 2010, Applied ergonomics.

[5]  U. Moritz,et al.  Low Back and Neck/Shoulder Pain in Construction Workers: Occupational Workload and Psychosocial Risk Factors , 1992, Spine.

[6]  H. Hsiao,et al.  Fall Prevention Research and Practice: A Total Worker Safety Approach , 2014, Industrial health.

[7]  K. Hunting,et al.  Impact of musculoskeletal and medical conditions on disability retirement-a longitudinal study among construction roofers. , 2010, American journal of industrial medicine.

[8]  Gary A Mirka,et al.  Influence of asymmetry on the flexion relaxation response of the low back musculature. , 2011, Clinical biomechanics.

[9]  Xiuwen Sue Dong,et al.  Work-related injuries among Hispanic construction workers-evidence from the medical expenditure panel survey. , 2010, American journal of industrial medicine.

[10]  Boyi Hu,et al.  The effects of stance width and foot posture on lumbar muscle flexion-relaxation phenomenon. , 2014, Clinical biomechanics.

[11]  Osama Abudayyeh,et al.  Occupational Injuries and Fatalities in the Roofing Contracting Industry , 2005 .

[12]  Cheryl Fairfield Estill,et al.  Simple solutions; ergonomics for construction workers , 2007 .

[13]  T K Fredericks,et al.  Surface slope effects on shingling frequency and postural balance in a simulated roofing task , 2008, Ergonomics.

[14]  T. Smith-Jackson,et al.  Safety Critical Incidents Among Small Construction Contractors: A Prospective Case Study , 2011 .

[15]  A. Nimbarte,et al.  The assessment of material-handling strategies in dealing with sudden loading: the effect of uneven ground surface on trunk biomechanical responses , 2015, Ergonomics.

[16]  Dong-Chul Seo,et al.  Comparison of risk factors for falls from height between commercial and residential roofers. , 2009, Journal of safety research.

[17]  Fei Dai,et al.  Risk Assessment of Work-Related Musculoskeletal Disorders in Construction: State-of-the-Art Review , 2015 .

[18]  Gary A. Mirka,et al.  Biomechanical evaluation of postures assumed when harvesting from bush crops , 2009 .

[19]  Guodong Guo,et al.  Assessing Spinal Loading Using the Kinect Depth Sensor: A Feasibility Study , 2013, IEEE Sensors Journal.

[20]  Gary A. Mirka,et al.  The effects of horizontal load speed and lifting frequency on lifting technique and biomechanics , 2010, Ergonomics.