What's next? Alternative materials for articulation in total joint replacement.
暂无分享,去创建一个
R. Sonntag | J. Kretzer | J. Reinders | R Sonntag | J Reinders | J P Kretzer | Jörn Reinders | J. P. Kretzer | Robert Sonntag
[1] M. Agreiter,et al. Revision rates after total joint replacement: cumulative results from worldwide joint register datasets. , 2011, The Journal of bone and joint surgery. British volume.
[2] K. S. St John,et al. Evaluation of the wear performance of a polycarbonate-urethane acetabular component in a hip joint simulator and comparison with UHMWPE and cross-linked UHMWPE , 2012, Journal of biomaterials applications.
[3] F. Kummer,et al. Surface oxidized zirconium total hip arthroplasty head damage due to closed reduction effects on polyethylene wear. , 2009, The Journal of arthroplasty.
[4] Reijo Lappalainen,et al. Tantalum as a buffer layer in diamond-like carbon coated artificial hip joints. , 2003, Journal of biomedical materials research. Part B, Applied biomaterials.
[5] M. J. Papo,et al. Mechanical wear behavior of nanocrystalline and multilayer diamond coatings on temporomandibular joint implants , 2004, Journal of materials science. Materials in medicine.
[6] Ceramic-on-metal for total hip replacement: mixing and matching can lead to high wear. , 2010, Artificial organs.
[7] V. Good,et al. Reduced Wear with Oxidized Zirconium Femoral Heads , 2003, The Journal of bone and joint surgery. American volume.
[8] F. Kummer,et al. Surface damage to an Oxinium femoral head prosthesis after dislocation. , 2007, The Journal of bone and joint surgery. British volume.
[9] D. Howie,et al. Aging performance of a compliant layer bearing acetabular prosthesis in an ovine hip arthroplasty model. , 2006, The Journal of arthroplasty.
[10] M. Laberge,et al. UHMWPE wear against roughened oxidized zirconium and CoCr femoral knee components during force-controlled simulation , 2008 .
[11] Zhongmin Jin,et al. Biotribology of articular cartilage--a review of the recent advances. , 2008, Medical engineering & physics.
[12] T. Bell,et al. Potential of improving tribological performance of UHMWPE by engineering the Ti6Al4V counterfaces , 1999 .
[13] V. Good,et al. Arthroplasty Options for the Young Patient: Oxinium on Cross-linked Polyethylene , 2005, Clinical orthopaedics and related research.
[14] Rui F. Silva,et al. Residual stress minimum in nanocrystalline diamond films , 2006 .
[15] J. Fisher,et al. Surface engineering: a low wearing solution for metal-on-metal hip surface replacements. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.
[16] O. Muratoglu,et al. Poly(vinyl alcohol)-acrylamide hydrogels as load-bearing cartilage substitute. , 2009, Biomaterials.
[17] M. Ziegler,et al. Comparison of Diamond‐Like‐Carbon and Alumina‐Oxide articulating with Polyethylene in Total Hip Arthroplasty , 2003 .
[18] L. Whiteside,et al. Diamond-like carbon coatings enhance scratch resistance of bearing surfaces for use in joint arthroplasty: hard substrates outperform soft. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.
[19] J. Fisher,et al. Comparison of wear of ultra-high molecular weight polyethylene acetabular cups against surface-engineered femoral heads , 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[20] F. Borgioli,et al. Improvement of wear resistance of Ti-6Al-4V alloy by means of thermal oxidation , 2005 .
[21] D. Dowson,et al. A comparison of friction in hydrogel and polyurethane materials for cushion-form joints , 1993 .
[22] Se Jun Park,et al. Instability of diamond-like carbon (DLC) films during sliding in aqueous environment , 2008 .
[23] S. Kurtz,et al. Future clinical and economic impact of revision total hip and knee arthroplasty. , 2007, The Journal of bone and joint surgery. American volume.
[24] Xiaoying Li,et al. Oxygen boost diffusion for the deep-case hardening of titanium alloys , 2000 .
[25] A. Kop,et al. Damage of oxinium femoral heads subsequent to hip arthroplasty dislocation three retrieval case studies. , 2007, The Journal of arthroplasty.
[26] S. Marras,et al. Characterization of FeOOH nanoparticles and amorphous silica matrix in an FeOOH-Sio 2 nanocomposite , 2008 .
[27] J. Schultze,et al. Corrosion stability of TiN prepared by ion implantation and PVD , 1993 .
[28] R. Cameron,et al. Analysis and evaluation of a biomedical polycarbonate urethane tested in an in vitro study and an ovine arthroplasty model. Part I: materials selection and evaluation. , 2005, Biomaterials.
[29] Masanori Kobayashi,et al. Characterization of a polyvinyl alcohol-hydrogel artificial articular cartilage prepared by injection molding , 2004, Journal of biomaterials science. Polymer edition.
[30] J. Fisher,et al. Comparison of wear of ultra high molecular weight polyethylene acetabular cups against alumina ceramic and chromium nitride coated femoral heads , 2005 .
[31] M. Wimmer,et al. New insights into wear and biological effects of metal-on-metal bearings. , 2011, The Journal of bone and joint surgery. American volume.
[32] J. Toguchida,et al. Attachment of artificial cartilage to underlying bone. , 2004, Journal of biomedical materials research. Part B, Applied biomaterials.
[33] M. Raimondi,et al. The in-vivo wear performance of prosthetic femoral heads with titanium nitride coating. , 2000, Biomaterials.
[34] M. Galetz,et al. Abrasion resistance of oxidized zirconium in comparison with CoCrMo and titanium nitride coatings for artificial knee joints. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.
[35] J Fisher,et al. Wear and Creep of Highly Crosslinked Polyethylene against Cobalt Chrome and Ceramic Femoral Heads , 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[36] J. Elsner,et al. Long‐term evaluation of a compliant cushion form acetabular bearing for hip joint replacement: A 20 million cycles wear simulation , 2011, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[37] A. Unsworth,et al. Compliant-layer tibial bearing inserts: Friction testing of different materials and designs for a new generation of prostheses that mimic the natural joint , 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[38] Magnus Tägil,et al. Outcomes of proximal interphalangeal joint pyrocarbon implants. , 2010, The Journal of hand surgery.
[39] D. Pupello,et al. Pyrolytic Carbon Endoprosthetic Replacement for Osteonecrosis and Femoral Fracture of the Hip: A Pilot Study , 2009, Clinical orthopaedics and related research.
[40] S. Raman,et al. Thermal oxidation of CP Ti — An electrochemical and structural characterization , 2010 .
[41] Huseyin Cimenoglu,et al. Oxidation of Ti-6Al-4V alloy , 2009 .
[42] A. Haubold,et al. Chapter I.2.8 – Pyrolytic Carbon for Long-Term Medical Implants , 2013 .
[43] D. Xiong,et al. A study on the friction properties of poly(vinyl alcohol) hydrogel as articular cartilage against titanium alloy , 2007 .
[44] Jia Li,et al. Microstructure and mechanical properties of gradient Ti(C, N) and TiN/Ti(C, N) multilayer PVD coatings , 2008 .
[45] Rui F. Silva,et al. Nanocrystalline diamond as a coating for joint implants: cytotoxicity and biocompatibility assessment , 2008 .
[46] C. Birkinshaw,et al. Compliant layer knee bearings. Part II: Preliminary wear assessment , 2010 .
[47] R. Streicher,et al. New surface modification for Ti-6Al-7Nb alloy: oxygen diffusion hardening (0DH) , 1991 .
[48] A. Boczkowska,et al. TiN–NCD composite coating produced on the Ti6Al4V alloy for medical applications , 2005 .
[49] Marta Brizuela,et al. Wear reduction effect on ultra-high-molecular-weight polyethylene by application of hard coatings and ion implantation on cobalt chromium alloy, as measured in a knee wear simulation machine , 2001 .
[50] A. Lowman,et al. Friction and wear behavior of poly(vinyl alcohol)/poly(vinyl pyrrolidone) hydrogels for articular cartilage replacement. , 2007, Journal of biomedical materials research. Part A.
[51] Alida Bellosi,et al. On the possibility of silicon nitride as a ceramic for structural orthopaedic implants. Part I: processing, microstructure, mechanical properties, cytotoxicity , 2008, Journal of materials science. Materials in medicine.
[52] Xiaodong Li,et al. Micro/nanoscale mechanical and tribological characterization of SiC for orthopedic applications. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.
[53] J. Fisher,et al. Ceramic-on-Metal Hip Arthroplasties : A Comparative In Vitro and In Vivo Study , 2007 .
[54] Kazuhiko Ishihara,et al. Wear resistance of artificial hip joints with poly(2-methacryloyloxyethyl phosphorylcholine) grafted polyethylene: comparisons with the effect of polyethylene cross-linking and ceramic femoral heads. , 2009, Biomaterials.
[55] Michael Carroll,et al. Wear performance of large-diameter differential-hardness hip bearings. , 2008, The Journal of arthroplasty.
[56] S Affatato,et al. An in vitro investigation of diamond-like carbon as a femoral head coating. , 2000, Journal of biomedical materials research.
[57] Rui F. Silva,et al. Adhesion behaviour assessment on diamond coated silicon nitride by acoustic emission , 2003 .
[58] Mazen Al-Hajjar,et al. Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX® delta ceramic-on-ceramic total hip replacement. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.
[59] J. Stanley,et al. Replacing joints with pyrolytic carbon , 2008 .
[60] V. Hetherington,et al. Evaluation of fibrocartilage regeneration and bone response at full-thickness cartilage defects in articulation with pyrolytic carbon or cobalt-chromium alloy hemiarthroplasties. , 1998, Journal of biomedical materials research.
[61] D. D’Lima,et al. Oxidized Zirconium Femoral Components Reduce Polyethylene Wear in a Knee Wear Simulator , 2004, Clinical orthopaedics and related research.
[62] D. Dennis,et al. THA With Delta Ceramic on Ceramic: Results of a Multicenter Investigational Device Exemption Trial , 2010, Clinical orthopaedics and related research.
[63] J Fisher,et al. Effects of clinically relevant alumina ceramic wear particles on TNF-alpha production by human peripheral blood mononuclear phagocytes. , 2003, Biomaterials.
[64] M. Roy,et al. Enhanced tribological performances of nanocrystalline diamond film , 2010 .
[65] Rui F. Silva,et al. Tribological characterization of NCD in physiological fluids , 2008 .
[66] C. Rorabeck,et al. The operation of the century: total hip replacement , 2007, The Lancet.
[67] Michael D. Ries,et al. Ceramics for Prosthetic Hip and Knee Joint Replacement , 2007 .
[68] Kozo Nakamura,et al. Superlubricious surface mimicking articular cartilage by grafting poly(2-methacryloyloxyethyl phosphorylcholine) on orthopaedic metal bearings. , 2009, Journal of biomedical materials research. Part A.
[69] G. Fenske,et al. Characterization of transfer layers forming on surfaces sliding against diamond-like carbon☆ , 1996 .
[70] Rui F. Silva,et al. Nanocrystalline diamond coating of silicon nitride ceramics by microwave plasma-assisted CVD , 2005 .
[71] Rui F. Silva,et al. Nano to micrometric HFCVD diamond adhesion strength to Si3N4 , 2007 .
[72] S D Cook,et al. Long-term follow-up of pyrolytic carbon metacarpophalangeal implants. , 1999, The Journal of bone and joint surgery. American volume.
[73] R. Hauert. An overview on the tribological behavior of diamond-like carbon in technical and medical applications , 2004 .
[74] H. Klemm. Silicon Nitride for High‐Temperature Applications , 2010 .
[75] D. Stone,et al. Hardness and elastic modulus of TiN based on continuous indentation technique and new correlation , 1991 .
[76] G Sines,et al. Fatigue behavior of a pyrolytic carbon. , 2000, Journal of biomedical materials research.
[77] J. Elsner,et al. Wear rate evaluation of a novel polycarbonate-urethane cushion form bearing for artificial hip joints. , 2010, Acta biomaterialia.
[78] V. Altstädt,et al. Tribological behaviour of carbon-nanofibre-reinforced poly(ether ether ketone) , 2004 .
[79] John Fisher,et al. THE 2007 OTTO AUFRANC AWARD: Ceramic-on-Metal Hip Arthroplasties: A Comparative In Vitro and In Vivo Study , 2007, Clinical orthopaedics and related research.
[80] Petr Louda,et al. Carbon coatings for medical implants , 2007 .
[81] S. Giannini,et al. A two-year prospective and retrospective multi-center study of the TriboFit® Hip System. , 2009, Journal of long-term effects of medical implants.
[82] C. Zavaglia,et al. Study on the tribological properties of pHEMA hydrogels for use in artificial articular cartilage , 2008 .
[83] Shin-Yoon Kim,et al. Midterm results of primary total hip arthroplasty using highly cross-linked polyethylene: minimum 7-year follow-up study. , 2011, The Journal of arthroplasty.
[84] S. Kurtz,et al. Accelerated aging, natural aging, and small punch testing of gamma-air sterilized polycarbonate urethane acetabular components. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.
[85] H. Ash,et al. The effect of bone cement particles on the friction of polyethylene and polyurethane knee bearings. , 2004, Physics in medicine and biology.
[86] Kenneth G. Budinski,et al. Tribological properties of titanium alloys , 1991 .
[87] J. Fisher,et al. In vitro analysis of the wear, wear debris and biological activity of surface-engineered coatings for use in metal-on-metal total hip replacements , 2003, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[88] T. Albrektsson,et al. Wear of ion-implanted pure titanium against UHMWPE. , 1989, Biomaterials.
[89] S. Kurtz,et al. PEEK biomaterials in trauma, orthopedic, and spinal implants. , 2007, Biomaterials.
[90] R. K. Roy,et al. Biomedical applications of diamond-like carbon coatings: a review. , 2007, Journal of biomedical materials research. Part B, Applied biomaterials.
[91] Ga Zhang,et al. A correlation between the tribological and mechanical properties of short carbon fibers reinforced PEEK materials with different fiber orientations , 2010 .
[92] A Unsworth,et al. Wear studies on the likely performance of CFR-PEEK/CoCrMo for use as artificial joint bearing materials , 2009, Journal of materials science. Materials in medicine.
[93] C. Colwell,et al. Incidence of ‘Squeaking’ After Ceramic-on-Ceramic Total Hip Arthroplasty , 2010, Clinical orthopaedics and related research.
[94] P. Campbell,et al. Serum and urine metal levels in patients with metal-on-metal surface arthroplasty , 2002, Journal of materials science. Materials in medicine.
[95] N. Pace,et al. Technical and histologic analysis of a retrieved carbon fiber-reinforced poly-ether-ether-ketone composite alumina-bearing liner 28 months after implantation. , 2008, The Journal of arthroplasty.
[96] D. Gardini,et al. On the possibility of silicon nitride as a ceramic for structural orthopaedic implants. Part II: chemical stability and wear resistance in body environment , 2008, Journal of materials science. Materials in medicine.
[97] S. Giannini,et al. Cushion Form Bearings in Total Hip Arthroplasty: Nature’s Approach to the Synovial Joint Problem , 2011 .
[98] J. Fisher,et al. An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads , 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[99] I. Clarke,et al. Fabrication and testing of silicon nitride bearings in total hip arthroplasty: winner of the 2007 "HAP" PAUL Award. , 2009, The Journal of arthroplasty.
[100] H. Gill,et al. The seven-year wear of highly cross-linked polyethylene in total hip arthroplasty: a double-blind, randomized controlled trial using radiostereometric analysis. , 2011, The Journal of bone and joint surgery. American volume.
[101] P. Dearnley,et al. Corrosion response of surface engineered titanium alloys damaged by prior abrasion , 2001 .
[102] S. Santavirta,et al. Potential of coatings in total hip replacement. , 2005, Clinical orthopaedics and related research.
[103] M. Kobayashi,et al. Development and Evaluation of Polyvinyl Alcohol-Hydrogels as an Artificial Atrticular Cartilage for Orthopedic Implants , 2010, Materials.
[104] A S Greenwald,et al. Alternative Bearing Surfaces: The Good, the Bad, and the Ugly , 2001, The Journal of bone and joint surgery. American volume.
[105] R. Farrar,et al. Wear of ultrahigh-molecular-weight polyethylene against titanium-nitride-coated counterfaces , 2005 .