Vibration signal models for fault diagnosis of planet bearings

Abstract Rolling element bearings are key components of planetary gearboxes. Among them, the motion of planet bearings is very complex, encompassing spinning and revolution. Therefore, planet bearing vibrations are highly intricate and their fault characteristics are completely different from those of fixed-axis case, making planet bearing fault diagnosis a difficult topic. In order to address this issue, we derive the explicit equations for calculating the characteristic frequency of outer race, rolling element and inner race fault, considering the complex motion of planet bearings. We also develop the planet bearing vibration signal model for each fault case, considering the modulation effects of load zone passing, time-varying angle between the gear pair mesh and fault induced impact force, as well as the time-varying vibration transfer path. Based on the developed signal models, we derive the explicit equations of Fourier spectrum in each fault case, and summarize the vibration spectral characteristics respectively. The theoretical derivations are illustrated by numerical simulation, and further validated experimentally and all the three fault cases (i.e. outer race, rolling element and inner race localized fault) are diagnosed.

[1]  Milton Abramowitz,et al.  Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables , 1964 .

[2]  Hugh Hunt,et al.  Vibration Response of a Wind-Turbine Planetary Gear Set in the Presence of a Localized Planet Bearing Defect , 2011 .

[3]  P. D. McFadden,et al.  The vibration produced by multiple point defects in a rolling element bearing , 1985 .

[4]  Darryll J. Pines,et al.  A review of vibration-based techniques for helicopter transmission diagnostics , 2005 .

[5]  William D. Mark,et al.  Stationary transducer response to planetary-gear vibration excitation with non-uniform planet loading , 2009 .

[6]  Fakher Chaari,et al.  Influence of manufacturing errors on the dynamic behavior of planetary gears , 2006 .

[7]  William D. Mark.  Stationary transducer response to planetary-gear vibration excitation II: Effects of torque modulations , 2009 .

[8]  Yaguo Lei,et al.  Condition monitoring and fault diagnosis of planetary gearboxes: A review , 2014 .

[9]  I. Soltani Bozchalooi,et al.  An energy operator approach to joint application of amplitude and frequency-demodulations for bearing fault detection ☆ , 2010 .

[10]  Darryll J. Pines,et al.  Vibration separation methodology for planetary gear health monitoring , 2000, Smart Structures.

[11]  Zhiqi Fan,et al.  A hybrid approach for fault diagnosis of planetary bearings using an internal vibration sensor , 2015 .

[12]  Zhipeng Feng,et al.  Fault diagnosis of wind turbine planetary gearbox under nonstationary conditions via adaptive optimal kernel time–frequency analysis , 2014 .

[13]  Zhipeng Feng,et al.  Fault diagnosis for wind turbine planetary gearboxes via demodulation analysis based on ensemble empirical mode decomposition and energy separation , 2012 .

[14]  Robert B. Randall,et al.  Application of spectral kurtosis for detection of a tooth crack in the planetary gear of a wind turbine , 2009 .

[15]  Robert B. Randall,et al.  Rolling element bearing diagnostics—A tutorial , 2011 .

[16]  Radoslaw Zimroz,et al.  A new feature for monitoring the condition of gearboxes in non-stationary operating conditions , 2009 .

[17]  Robert B. Randall,et al.  A Stochastic Model for Simulation and Diagnostics of Rolling Element Bearings With Localized Faults , 2003 .

[18]  Ming J. Zuo,et al.  Joint amplitude and frequency demodulation analysis based on local mean decomposition for fault diagnosis of planetary gearboxes , 2013 .

[19]  P. D. McFadden.  A technique for calculating the time domain averages of the vibration of the individual planet gears and the sun gear in an epicyclic gearbox , 1991 .

[20]  P. D. McFadden,et al.  Window functions for the calculation of the time domain averages of the vibration of the individual planet gears and sun gear in an epicyclic gearbox , 1994 .

[21]  Yaguo Lei,et al.  Fault detection of planetary gearboxes using new diagnostic parameters , 2012 .

[22]  P. D. McFadden,et al.  Model for the vibration produced by a single point defect in a rolling element bearing , 1984 .

[23]  Zhipeng Feng,et al.  Iterative generalized synchrosqueezing transform for fault diagnosis of wind turbine planetary gearbox under nonstationary conditions , 2015 .

[24]  Dong Han,et al.  Planetary gearbox fault diagnosis using an adaptive stochastic resonance method , 2013 .

[25]  Darryll J. Pines,et al.  Constrained adaptive lifting and the CAL4 metric for helicopter transmission diagnostics , 2009 .

[26]  Ahmet Kahraman,et al.  A theoretical and experimental investigation of modulation sidebands of planetary gear sets , 2009 .

[27]  Ming J. Zuo,et al.  Fault diagnosis of planetary gearboxes via torsional vibration signal analysis , 2013 .

[28]  Radoslaw Zimroz,et al.  Vibration condition monitoring of planetary gearbox under varying external load , 2009 .

[29]  Pe Whiteley,et al.  Detection of planet bearing faults in wind turbine gearboxes , 2012 .

[30]  Zhipeng Feng,et al.  Complex signal analysis for wind turbine planetary gearbox fault diagnosis via iterative atomic decomposition thresholding , 2014 .

[31]  Ahmet Kahraman,et al.  A dynamic model to predict modulation sidebands of a planetary gear set having manufacturing errors , 2010 .

[32]  Fakher Chaari,et al.  Dynamic analysis of a planetary gear failure caused by tooth pitting and cracking , 2006 .

[33]  Ming J. Zuo,et al.  Vibration signal models for fault diagnosis of planetary gearboxes , 2012 .