Preparation of highly concentrated bitumen emulsions by catastrophic phase inversion: Follow-up of the emulsification process

This study focuses on the mechanisms of bitumen emulsification and on the impact of the formulation, when emulsification is carried out in the area of high internal phase ratio (0.9). Kinetics of emulsification were determined using systemic rheology coupled with optical microscopy observations. Microscopic observations revealed a catastrophic phase inversion with formation of abnormal multiple emulsions, occurring very quickly after contacting the bitumen with the aqueous phase containing the surfactant. The direct emulsion thus obtained is then refined during a subsequent agitation step. The viscosity follow-up during the emulsification highlights four steps in the kinetic of catastrophic phase inversion, which have been related to morphological characteristics of the dispersions observed by optical microscopy.

[1]  J. Andérez,et al.  MINIEMULSION FORMATION BY TRANSITIONAL INVERSION , 1999 .

[2]  A. Kühnle,et al.  Nano-emulsion formation by emulsion phase inversion , 2004 .

[3]  J. Salager,et al.  Emulsion Catastrophic Inversion from Abnormal to Normal Morphology. 1. Effect of the Water-to-Oil Ratio Rate of Change on the Dynamic Inversion Frontier , 2003 .

[4]  C. Solans,et al.  Nano-emulsions: Formation by low-energy methods , 2012 .

[5]  P. Erra,et al.  Novel preparation methods for highly concentrated water-in-oil emulsions , 1994 .

[6]  P. Marchal,et al.  Heteroflocculation of a Cationic Oil-in-Water Emulsion Resulting from Fontainebleau's Sandstone Powder Addition as a Model for Asphalt Emulsion Breakup , 2012 .

[7]  C. Dalmazzone.  Génération mécanique des émulsions , 2000 .

[8]  L. Choplin,et al.  In situ rheological monitoring in semi‐batch emulsification process for cosmetic lotion production , 1998 .

[9]  W. Agterof,et al.  On the escape process during phase inversion of an emulsion , 2002 .

[10]  P. Marchal,et al.  Emulsion Catastrophic Inversion from Abnormal to Normal Morphology. 7. Emulsion Evolution Produced by Continuous Stirring To Generate a Very High Internal Phase Ratio Emulsion , 2008 .

[11]  J. Salager,et al.  Emulsion Catastrophic Inversion from Abnormal to Normal Morphology. 3. Conditions for Triggering the Dynamic Inversion and Application to Industrial Processes , 2003 .

[12]  L. Choplin,et al.  Viscous Oil Emulsification by Catastrophic Phase Inversion: Influence of Oil Viscosity and Process Conditions , 2011 .

[13]  J. Salager,et al.  Using emulsion inversion in industrial processes. , 2004, Advances in colloid and interface science.

[14]  C. Sleicher,et al.  Factors affecting which phase will disperse when immiscible liquids are stirred together , 1965 .

[15]  K. Shinoda,et al.  The Correlation between Phase Inversion Temperature In Emulsion and Cloud Point in Solution of Nonionic Emulsifier , 1964 .

[16]  P. Marchal,et al.  Quantitative Analysis of Mixer-Type Rheometers using the Couette Analogy , 2002 .

[17]  L. Fradette,et al.  Comparison of Mixing Technologies for the Production of Concentrated Emulsions , 2007 .

[18]  M. Briceño,et al.  The emergence of formulation engineering in emulsion making—transferring know‐how from research laboratory to plant , 2003 .

[19]  L. Madariaga,et al.  Emulsion Catastrophic Inversion from Abnormal to Normal Morphology. 6. Effect of the Phase Viscosity on the Inversion Produced by Continuous Stirring , 2007 .

[20]  L. Choplin,et al.  Emulsion Catastrophic Inversion from Abnormal to Normal Morphology. 4. Following the Emulsion Viscosity during Three Inversion Protocols and Extending the Critical Dispersed-Phase Concept , 2005 .