Vibration-Based Method and Sensor for Monitoring of Bridge Scour

Scour is the major cause for many bridge failures and damage to piers and abutments. Scour is not easily discernible because it is hidden under the channel flow. Over the years, a number of sensors have been developed for detection of scour depth. Development, testing, and field implementation of a new and simple type of scour sensor is described in this paper. The scour depth detection concept is based on measuring the fundamental frequency of vibration of a rod embedded in the riverbed. The sensor uses a single fiber-optic Bragg grating (FBG) sensor for transduction of the vibration frequency. The inverse relationship between the fundamental frequency and the length of the sensor rod is used for detection of the scour depth. A computational approach is developed based on the Winkler spring reaction soil model for automated calibration of the scour sensor during installation in the riverbed. The scope of the research included development of the theoretical basis for the sensor, establishment of the computational methodology for detection of the riverbed foundation properties, proof-of-concept laboratory tests, small-scale field verification tests, and installation and remote monitoring of scour in a multispan scour critical bridge in Illinois. The results include laboratory test data from the measurements in soil, simulated scour tests in a hydraulic flume, and real-time data from remote monitoring of scour at the bridge site.

[1]  R. Clough,et al.  Dynamics Of Structures , 1975 .

[2]  Mjn Priestley,et al.  Seismic Design and Retrofit of Bridges , 1996 .

[3]  Farhad Ansari,et al.  Practical Implementation of Optical Fiber Sensors in Civil Structural Health Monitoring , 2007 .

[4]  L. W. Zevenbergen,et al.  Bridge Scour and Stream Instability Countermeasures: Experience, Selection and Design Guidance. Third Edition. Volume 2 , 2009 .

[5]  S. Rizkalla,et al.  Global and Local Fiber Optic Sensors for Health Monitoring of Civil Engineering Infrastructure Retrofit with FRP Materials , 2010 .

[6]  P Davies,et al.  RESEARCH PAYS OFF: INSTRUMENTATION FOR MEASURING SCOUR AT BRIDGE PIERS AND ABUTMENTS , 1997 .

[7]  Donald C. Hayes,et al.  Use of Fathometers and Electrical-Conductivity Probes to Monitor Riverbed Scour at Bridge Piers , 1995 .

[8]  Libo Yuan.  Push–pull fiber optic inclinometer based on a Mach–Zehnder optical low-coherence reflectometor , 2004 .

[9]  Jihn-Sung Lai,et al.  Real-time monitoring of local scour by using fiber Bragg grating sensors , 2005 .

[10]  Kuo Chun Chang,et al.  Flood scour monitoring system using fiber Bragg grating sensors , 2006 .

[11]  Carl T. Haas,et al.  Remote bridge scour monitoring : a prioritization and implementation guideline , 1999 .

[12]  Xiong Yu,et al.  Time Domain Reflectometry Automatic Bridge Scour Measurement System: Principles and Potentials , 2009 .

[13]  Hong Guan,et al.  Operational modal analysis for vibration-based structural health monitoring of civil structures , 2009 .

[14]  Vistasp M. Karbhari,et al.  Structural health monitoring of civil infrastructure systems , 2009 .

[15]  Farhad Ansari,et al.  Post-seismic Structural Health Monitoring of a Column Subjected to Near Source Ground Motions , 2008 .

[16]  D. Max Sheppard,et al.  Field performance of an acoustic scour-depth monitoring system , 1994 .

[17]  S. Abrate,et al.  Structural Monitoring with Fiber Optic Technology , 2001 .

[18]  L. Zabilansky,et al.  LABORATORY INVESTIGATION OF TIME-DOMAIN REFLECTOMETRY SYSTEM FOR MONITORING BRIDGE SCOUR , 1999 .

[19]  Farhad Ansari,et al.  Serially multiplexed FBG accelerometer for structural health monitoring of bridges , 2009 .

[20]  Yail J. Kim,et al.  Structural health monitoring: a Canadian perspective , 2010 .

[21]  Farhad Ansari,et al.  Post earthquake performance monitoring of a typical highway overpass bridge , 2009 .