Enhanced cyclic stability at elevated temperature of spinel LiNi0.5Mn1.5O4 by Li4Ti5O12 coating as cathode material for high voltage lithium ion batteries

[1]  Zhongbo Hu,et al.  Unraveling the multiple effects of Li2ZrO3 coating on the structural and electrochemical performances of LiCoO2 as high-voltage cathode materials , 2016 .

[2]  Qian Sun,et al.  Nanoscale Manipulation of Spinel Lithium Nickel Manganese Oxide Surface by Multisite Ti Occupation as High‐Performance Cathode , 2017, Advanced materials.

[3]  Zhixing Wang,et al.  Metallurgy Inspired Formation of Homogeneous Al2O3 Coating Layer To Improve the Electrochemical Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material , 2017 .

[4]  Xiangyang Zhou,et al.  Enhancing the lithium storage capacity of FeF 3 cathode material by introducing C@LiF additive , 2018 .

[5]  Dan Xu,et al.  Oxygen electrocatalysts in metal-air batteries: from aqueous to nonaqueous electrolytes. , 2014, Chemical Society reviews.

[6]  Yong Wang,et al.  Investigation on the Electrochemical Properties and Stabilized Surface/Interface of Nano-AlPO4-Coated Li1.15Ni0.17Co0.11Mn0.57O2 as the Cathode for Lithium-Ion Batteries. , 2018, ACS applied materials & interfaces.

[7]  Huiling Zhao,et al.  LaF 3 nanolayer surface modified spinel LiNi 0.5 Mn 1.5 O 4 cathode material for advanced lithium-ion batteries , 2018 .

[8]  Li Yang,et al.  A new hybrid strategy for fabricating titanium dioxide/tin dioxide/carbon composites with outstanding lithium-ion storage , 2018, Chemical Engineering Journal.

[9]  Xinhua Liang,et al.  Employing Synergetic Effect of Doping and Thin Film Coating to Boost the Performance of Lithium-Ion Battery Cathode Particles , 2016, Scientific Reports.

[10]  Min‐Sik Park,et al.  Amorphous Li-Zr-O layer coating on the surface of high-Ni cathode materials for lithium ion batteries , 2018 .

[11]  Allen Pei,et al.  Stabilized Li3N for efficient battery cathode prelithiation , 2017 .

[12]  Hongyan Sun,et al.  Effect of Zr doping on LiNi0.5Mn1.5O4 with ordered or disordered structures , 2018, Journal of Alloys and Compounds.

[13]  Xiqian Yu,et al.  Dynamic evolution of cathode electrolyte interphase (CEI) on high voltage LiCoO2 cathode and its interaction with Li anode , 2018, Energy Storage Materials.

[14]  Heung Nam Han,et al.  Mechanochemical coating with nano-VOPO4: Over lithiated layered oxide with high coulombic efficiency and good thermal stability , 2018, Electrochimica Acta.

[15]  W. Liu,et al.  Fluorinated phosphazene derivative - A promising electrolyte additive for high voltage lithium ion batteries: From electrochemical performance to corrosion mechanism , 2018 .

[16]  Gang Wang,et al.  Improving the electrochemical performances of spherical LiNi0.5Mn1.5O4 by Fe2O3 surface coating for lithium-ion batteries , 2016 .

[17]  Karim Zaghib,et al.  Comparative studies of the phase evolution in M-doped LixMn1.5Ni0.5O4 (M = Co, Al, Cu and Mg) by in-situ X-ray diffraction , 2014 .

[18]  C. Nan,et al.  Impact of P-Doped in Spinel LiNi0.5Mn1.5O4 on Degree of Disorder, Grain Morphology, and Electrochemical Performance , 2015 .

[19]  C. Cao,et al.  Lithium titanate epitaxial coating on spinel lithium manganese oxide surface for improving the performance of lithium storage capability. , 2014, ACS applied materials & interfaces.

[20]  Congcong Zhang.  Significant improvement on electrochemical performance of LiMn 2 O 4 at elevated temperature by atomic layer deposition of TiO 2 nanocoating , 2017 .

[21]  Jiujun Zhang,et al.  Effect of Surface Modification with Spinel NiFe2O4 on Enhanced Cyclic Stability of LiMn2O4 Cathode Material in Lithium Ion Batteries , 2018 .

[22]  Alicia Koo,et al.  Significantly improving cycling performance of cathodes in lithium ion batteries: The effect of Al 2 O 3 and LiAlO 2 coatings on LiNi 0.6 Co 0.2 Mn 0.2 O 2 , 2018 .

[23]  Takashi Matsuyama,et al.  Electrochemical Properties of LiCoO2 Electrodes with Latex Binders on High-Voltage Exposure , 2015 .

[24]  Xiaogang Zhang,et al.  Nasicon-Type Surface Functional Modification in Core-Shell LiNi0.5Mn0.3Co0.2O2@NaTi2(PO4)3 Cathode Enhances Its High-Voltage Cycling Stability and Rate Capacity toward Li-Ion Batteries. , 2018, ACS applied materials & interfaces.

[25]  Qiaoji Zheng,et al.  Critical roles of semi-conductive LaFeO 3 coating in enhancing cycling stability and rate capability of 5 V LiNi 0.5 Mn 1.5 O 4 cathode materials , 2018 .

[26]  Bingkun Guo,et al.  Al2O3 coated Li1.2Ni0.2Mn0.2Ru0.4O2 as cathode material for Li-ion batteries , 2018 .

[27]  Yun Zhang,et al.  Hierarchical carambola-like Li4Ti5O12-TiO2 composites as advanced anode materials for lithium-ion batteries , 2016 .

[28]  Wei Li,et al.  Graphene-analogous structural MoS2 modification to improve electrochemical properties of Ni-rich layered oxide cathode material for lithium-ion batteries , 2018, Journal of Power Sources.

[29]  Yi Cui,et al.  Strong sulfur binding with conducting Magnéli-phase Ti(n)O2(n-1) nanomaterials for improving lithium-sulfur batteries. , 2014, Nano letters.

[30]  Karim Zaghib,et al.  Spinel materials for high-voltage cathodes in Li-ion batteries , 2014 .

[31]  Huiling Zhao,et al.  Enhanced Electrochemical Performance of LiNi0.5Mn1.5O4 Cathode Material by YPO4 Surface Modification , 2018 .

[32]  K. Amine,et al.  Atomic to Nanoscale Investigation of Functionalities of an Al2O3 Coating Layer on a Cathode for Enhanced Battery Performance , 2016 .

[33]  Surface and Interface Issues in Spinel LiNi0.5Mn1.5O4: Insights into a Potential Cathode Material for High Energy Density Lithium Ion Batteries , 2016 .

[34]  C. Nan,et al.  Effect of temperature of Li 2 O-Al 2 O 3 -TiO 2 -P 2 O 5 solid-state electrolyte coating process on the performance of LiNi 0.5 Mn 1.5 O 4 cathode materials , 2015 .

[35]  Dean J. Miller,et al.  Synthesis of porous carbon supported palladium nanoparticle catalysts by atomic layer deposition: application for rechargeable lithium-O2 battery. , 2013, Nano letters.