A road vehicle multibody model for crash simulation based on the plastic hinges approach to structural deformations

Abstract The development of strategies for the passive safety protection of road vehicles, such as restraint systems, only focus on a part of the vehicle but still require the complete vehicle model to simulate realistic scenarios. Unfortunately complete models of vehicles are not available by car manufacturers for this purpose. Here a complete multibody model of a road vehicle, including occupant models, is presented for application to the design of side impact protection. The structure of the vehicle is represented by multibody system of rigid bodies connected by kinematic joints and plastic hinges. The plastic hinges characteristic are obtained from CAD information via nonlinear finite element analysis of structural components. The contact between the system components is represented by a continuous contact force model. The integrated model, simulated in side impact and validated against experimental test data, is discussed and its use for developing new safety devices is outlined.

[1]  Linda R. Petzold,et al.  Computational Challenges in Mechanical Systems Simulation , 1994 .

[2]  C. K. Kroell,et al.  Impact Response of the Human Thorax , 1973 .

[3]  D. H. Robbins,et al.  The MVMA Two-Dimensional Crash Victim Simulation , 1974 .

[4]  Miguel T. Silva,et al.  A Multibody Approach to the Vehicle and Occupant Integrated Simulation , 1996 .

[5]  J. O. Hallquist.  Preliminary user's manuals for DYNA3D and DYNAP (nonlinear dynamic analysis of solids in three dimensions) , 1976 .

[6]  Richard A. Wilson,et al.  State-of-the-Art-A Review of Vehicle Impact Testing: How It Began and What is Being Done , 1970 .

[7]  J. E. Thompson.  Vehicle Crush Prediction Using Finite-Element Techniques , 1973 .

[8]  Joseph W. Coltman,et al.  Computer Simulation of an Aircraft Seat and Occupant in a Crash Environment. Volume 2. Program SOM-LA (Seat/Occupant Model - Light Aircraft) User Manual , 1983 .

[9]  Manuel S. Pereira,et al.  Computer-Aided Analysis of Rigid and Flexible Mechanical Systems , 1994 .

[10]  Deren Ma,et al.  Impact Dynamics of Multibody Mechanical Systems and Application to Crash Responses of Aircraft Occupant/Structure , 1995 .

[11]  Le Xuan Anh,et al.  Dynamics of Mechanical Systems with Coulomb Friction , 2003 .

[12]  Jorge Ambrósio,et al.  Design of train crash experimental tests by optimization procedures , 2004 .

[13]  Manuel S. Pereira,et al.  Distributed and discrete nonlinear deformations on multibody dynamics , 1996 .

[14]  Raymond R. McHenry,et al.  Analysis of the dynamics of automobile passenger-restraint systems , 1963 .

[15]  Parviz E. Nikravesh,et al.  Plastic hinge approach to vehicle crash simulation , 1983 .

[16]  B. J. Hsieh,et al.  Non-Linear Transient Finite Element Analysis with Convected Co--ordinates , 1973 .

[17]  J. Ambrósio,et al.  Stabilization Methods for the Integration of DAE in the Presence of Redundant Constraints , 2003 .

[18]  Parviz E. Nikravesh,et al.  Computer-aided analysis of mechanical systems , 1988 .

[19]  Edward J. Haug,et al.  Dynamics of mechanical systems with Coulomb friction, stiction, impact and constraint addition-deletion—III Spatial systems , 1986 .

[20]  H. Saunders,et al.  Modern Automotive Structural Analysis , 1982 .

[21]  G H Tidbury.  VEHICLE STRUCTURAL ANALYSIS: A SURVEY , 1980 .

[22]  E. Haug,et al.  Dynamics of mechanical systems with Coulomb friction, stiction, impact and constraint addition-deletion—I theory , 1986 .