Collapsible impact energy absorbers: an overview

This paper reviews the common shapes of collapsible energy absorbers and the different modes of deformation of the most common ones. Common shapes include circular tubes, square tubes, frusta, struts, honeycombs, and sandwich plates. Common modes of deformation for circular tubes include axial crushing, lateral indentation, lateral flattening, inversion and splitting. Non-collapsible systems, such as lead extrusions or tube expansions, are considered to be beyond the scope of this review.

[1]  N.K. Gupta,et al.  Collapse load analysis of square and rectangular tubes , 1995 .

[2]  A. A. Singace,et al.  Behaviour of axially crushed corrugated tubes , 1997 .

[3]  R. H. Grzebieta,et al.  Energy absorption of an initially imperfect strut subjected to an impact load , 1986 .

[4]  W Johnson,et al.  CRASHWORTHINESS OF VEHICLES , 1978 .

[5]  Norman Jones,et al.  Dynamic axial crushing of circular tubes , 1984 .

[6]  Philip G. Hodge,et al.  Crushing of a Tube Between Rigid Plates , 1963 .

[7]  Athanasios G. Mamalis,et al.  Extensible plastic collapse of thin-wall frusta as energy absorbers , 1986 .

[8]  N. Gupta,et al.  Transverse collapse of thin-walled square tubes in opposed loadings , 1990 .

[9]  W. Johnson,et al.  Large deformations of thin-walled circular tubes under transverse loading—I: An experimental survey of the bending of simply supported tubes under a central load , 1976 .

[10]  O. Hopperstad,et al.  Crashworthiness of aluminium extrusions: validation of numerical simulation, effect of mass ratio and impact velocity , 1999 .

[11]  Dimitrios E. Manolakos,et al.  Energy absorption capability of fibreglass composite square frusta subjected to static and dynamic axial collapse , 1996 .

[12]  H. W. Ng,et al.  An experimental study on tearing energy in splitting square metal tubes , 1994 .

[13]  Y. Ravalard,et al.  Application of kinematic models to compression and bending in simplified crash calculations , 1993 .

[14]  Abdulmalik A. Alghamdi,et al.  Axial crushing of frusta between two parallel plates , 2000 .

[15]  E. C. Chirwa,et al.  Theoretical analysis of tapered thin-walled metal inverbucktube , 1993 .

[16]  Dean L Sicking,et al.  DESIGN AND SIMULATION OF A SEQUENTIAL KINKING GUARDRAIL TERMINAL , 1998 .

[17]  John F. Carney,et al.  Energy dissipation in braced cylindrical shells , 1988 .

[18]  John F. Carney,et al.  Experimental analyses of collapse behaviors of braced elliptical tubes under lateral compression , 1998 .

[19]  Norman Jones,et al.  Impulsive loading of a cylindrical shell with transverse shear and rotatory inertia , 1983 .

[20]  Stephen R Reid,et al.  Crushing analysis of braced metal rings using the equivalent structure technique , 1987 .

[21]  W. Abramowicz,et al.  STATIC AND DYNAMIC AXIAL CRUSHING OF CIRCULAR AND SQUARE TUBES , 1985 .

[22]  A. G Mamalis,et al.  The quasi-static crumpling of thin-walled circular cylinders and frusta under axial compression , 1983 .

[23]  H E Postlethwaite,et al.  Use of collapsible structural elements as impact isolators, with special references to automotive applications , 1970 .

[24]  G. T. Singley,et al.  DYNAMIC RESPONSE OF STRUCTURES. , 1972 .

[25]  John F. Carney,et al.  Initial collapse of braced elliptical tubes under lateral compression , 1997 .

[26]  Anthony G. Atkins,et al.  Scaling in combined plastic flow and fracture , 1988 .

[27]  S. Reid,et al.  Static and dynamic axial crushing of foam-filled sheet metal tubes , 1986 .

[28]  S. R. Reid,et al.  RESPONSE OF ONE-DIMENSIONAL METAL RING SYSTEMS TO END IMPACT. , 1984 .

[29]  Han Zhao,et al.  CRUSHING BEHAVIOUR OF ALUMINIUM HONEYCOMBS UNDER IMPACT LOADING , 1998 .

[30]  T. Wierzbicki,et al.  Axial Crushing of Multicorner Sheet Metal Columns , 1989 .

[31]  Werner Goldsmith,et al.  An experimental study of energy absorption in impact on sandwich plates. , 1992 .

[32]  Athanasios G. Mamalis,et al.  Axial plastic collapse of thin bi-material tubes as energy dissipating systems , 1991 .

[33]  Athanasios G. Mamalis,et al.  The axial crushing of thin PVC tubes and frusta of square cross-section , 1989 .

[34]  W. Abramowicz,et al.  Alexander revisited—A two folding elements model of progressive crushing of tubes , 1992 .

[35]  G. L. Viegelahn,et al.  Energy Absorption and Deformation Modes of Thin PVC Tubes Internally Grooved When Subjected to Axial Plastic Collapse , 1989 .

[36]  P D Soden,et al.  Inextensional collapse of thin-walled tubes under axial compression , 1977 .

[37]  Stephen R Reid,et al.  Lateral compression of tubes and tube-systems with side constraints , 1979 .

[38]  Dimitrios E. Manolakos,et al.  Analysis of failure mechanisms observed in axial collapse of thin-walled circular fibreglass composite tubes , 1996 .

[39]  W. Johnson,et al.  The compression of crossed layers of thin tubes , 1977 .

[40]  W. Johnson,et al.  Long stroke energy dissipation in splitting tubes , 1983 .

[41]  C. Q. Ru,et al.  AN ENERGY CRITERION FOR THE DYNAMIC PLASTIC BUCKLING OF CIRCULAR CYLINDERS UNDER IMPULSIVE LOADING , 1985 .

[42]  Shaker A. Meguid,et al.  Experimental and theoretical evaluation of a novel shock absorber for an electrically powered vehicle , 1991 .

[43]  V. Tvergaard On the transition from a diamond mode to an axisymmetric mode of collapse in cylindrical shells , 1983 .

[44]  Stephen R Reid,et al.  METAL TUBES AS IMPACT ENERGY ABSORBERS , 1985 .

[45]  John J Harrigan,et al.  Inertia effects in impact energy absorbing materials and structures , 1999 .

[46]  Stephen R Reid,et al.  Dynamic uniaxial crushing of wood , 1997 .

[47]  Sidney Mindess,et al.  Impact testing of concrete using a drop-weight impact machine , 1989 .

[48]  R. Smith,et al.  TUBULAR RINGS AS IMPACT ENERGY ABSORBERS. , 1984 .

[49]  Stephen R Reid,et al.  Structural plastic shock model for one-dimensional ring systems , 1983 .

[50]  Enboa Wu,et al.  AXIAL CRUSH OF METALLIC HONEYCOMBS , 1997 .

[51]  Norman Jones,et al.  Dynamic and static axial crushing of axially stiffened cylindrical shells , 1990 .

[52]  T. Y. Reddy,et al.  Axial compression of foam-filled thin-walled circular tubes , 1988 .

[53]  Mark White,et al.  Experimental quasi-static axial crushing of top-hat and double-hat thin-walled sections , 1999 .

[54]  S. Al-Hassani,et al.  Characteristics of Inversion Tubes under Axial Loading , 1972 .

[55]  Stephen R Reid,et al.  Transient effects in the quasi-static and dynamic internal inversion and nosing of metal tubes , 1998 .

[56]  J. D. Reid Crashworthiness of automotive steel midrails: Thickness and material sensitivity , 1996 .

[57]  G. L. Viegelahn,et al.  Energy dissipation and associated failure modes when axially loading polygonal thin-walled cylinders , 1991 .

[58]  A. Atkins On the number of cracks in the axial splitting of ductile metal tubes , 1987 .

[59]  M. N. Nahas Impact energy dissipation characteristics of thin-walled cylinders , 1993 .

[60]  K.R.F. Andrews,et al.  Classification of the axial collapse of cylindrical tubes under quasi-static loading , 1983 .

[61]  A.A.N. Aljawi,et al.  INVERSION OF FRUSTA AS IMPACT ENERGY ABSORBERS , 2000 .

[62]  T Wierzbicki,et al.  Crushing analysis of rotationally symmetric plastic shells , 1982 .

[63]  A. G. Pugsley,et al.  ON THE CRUMPLING OF THIN TUBULAR STRUTS , 1979 .

[64]  R. C. Gilkie,et al.  The Impact Resistance of Plastics Sandwich Constructions Using Low Density Urethane Foam Cores , 1971 .

[65]  J. Doltsinis Structural impact and crashworthiness Volume 1, Keynote Lectures, G.A.O. Davies, ed. (Elsevier Applied Science Publishers, Barking, U.K.), 248 pp., £28.00, ISBN 0 85334 288 1 , 1986 .

[66]  Elsayed A. Orady,et al.  Current Advances in Mechanical Design and Production , 1997 .

[67]  Athanasios G. Mamalis,et al.  On the inextensional axial collapse of thin PVC conical shells , 1986 .

[68]  W. Abramowicz,et al.  Dynamic axial crushing of square tubes , 1984 .

[69]  W. Ren,et al.  An experimental study on the dynamic axial plastic buckling of cylindrical shells , 1983 .

[70]  C. Brebbia,et al.  Computational methods in contact mechanics , 1993 .

[71]  Eric W. Sponberg Carbon Fiber Sailboat Hulls: How to Optimize the Use of an Expensive Material , 1986 .

[72]  G. L. Viegelahn,et al.  The crumpling of steel thin-walled tubes and frusta under axial compression at elevated strain-rates: Some experimental results , 1984 .

[73]  S. Reid,et al.  Axial splitting of circular metal tubes , 1986 .

[74]  W. Johnson,et al.  Large deformations of thin-walled circular tubes under transverse loading—II: Experimental study of the crushing of circular tubes by centrally applied opposed wedge-shaped indenters , 1976 .

[75]  R. H. Grzebieta,et al.  The static behaviour of struts with initial kinks at their centre point , 1985 .

[76]  Stephen R Reid,et al.  Experimental investigation of inertia effects in one-dimensional metal ring systems subjected to end impact — I. Fixed-ended systems , 1983 .

[77]  Norman Jones,et al.  Recent Studies on the Dynamic Plastic Behavior of Structures , 1989 .

[78]  A. Kinkead,et al.  Analysis for inversion load and energy absorption of a circular tube , 1983 .

[79]  Athanasios G. Mamalis,et al.  The modelling of the progressive extensible plastic collapse of thin-wall shells , 1988 .

[80]  Stephen R Reid,et al.  Influence of strain hardening on the deformation of thin rings subjected to opposed concentrated loads , 1982 .

[81]  A. C. Walton,et al.  An experimental investigation of the energy dissipation of a number of car bumpers under quasi-static lateral loads , 1983 .

[82]  Stephen R Reid,et al.  Local loading of simply-supported steel—grout sandwich plates , 1993 .

[83]  M. D. Rhodes,et al.  Impact fracture of composite sandwich structures , 1975 .

[84]  G. L. Easwara Prasad,et al.  Axial compression of metallic spherical shells between rigid plates , 1999 .

[85]  W. Abramowicz,et al.  Axial crushing of foam-filled columns , 1988 .

[86]  O. Hopperstad,et al.  Static and dynamic axial crushing of square thin-walled aluminium extrusions , 1996 .

[87]  T. Wierzbicki,et al.  On the Crushing Mechanics of Thin-Walled Structures , 1983 .

[88]  S. Reid,et al.  METALLIC ENERGY DISSIPATING SYSTEMS. , 1978 .

[89]  A. Pugsley THE LARGE-SCALE CRUMPLING OF THIN CYLINDRICAL COLUMNS , 1960 .

[90]  O. C. Zienkiewicz,et al.  Metal forming and impact mechanics: S. R. Reid Pergamon Press U.K. September 1985 348 pp £35.00 US$ 50.00 ISBN: 0 08 031679 4 , 1986 .

[91]  A.A.N. Aljawi and A.A. Alghamdi Investigation Of Axially Compressed Frusta AsImpact Energy Absorbers , 1970 .

[92]  S. Reid PLASTIC DEFORMATION MECHANISMS IN AXIALLY COMPRESSED METAL TUBES USED AS IMPACT ENERGY ABSORBERS , 1993 .

[93]  S.T.S. Al-Hassani,et al.  Axial crushing of wood-filled square metal tubes , 1993 .

[94]  Norman Jones,et al.  Dynamic axial plastic buckling of stringer stiffened cylindrical shells , 1982 .

[95]  R. Adams,et al.  An Assessment of the Impact Performance of Bonded Joints for Use in High Energy Absorbing Structures , 1985 .

[96]  Dimitrios E. Manolakos,et al.  Analytical modelling of the static and dynamic axial collapse of thin-walled fibreglass composite conical shells , 1997 .

[97]  Norman Jones,et al.  Some recent developments and future trends in thin-walled sections for structural crashworthiness , 1998 .

[98]  Stephen R Reid,et al.  Energy absorbing capacities of braced metal tubes , 1983 .

[99]  W. Abramowicz,et al.  Transition from initial global bending to progressive buckling of tubes loaded statically and dynamically , 1997 .

[100]  J. M. Alexander AN APPROXIMATE ANALYSIS OF THE COLLAPSE OF THIN CYLINDRICAL SHELLS UNDER AXIAL LOADING , 1960 .

[101]  Tomasz Wierzbicki,et al.  Crushing analysis of metal honeycombs , 1983 .

[102]  N. Gupta,et al.  Some aspects of axial collapse of cylindrical thin-walled tubes , 1998 .

[103]  W. Johnson,et al.  Protection of car occupants in frontal impacts with heavy lorries: Frontal structures , 1983 .