3D CFD study and optimisation of static mixer type feed spacer for reverse osmosis

[1]  H. Shon,et al.  Conceptual design of a dynamic turbospacer for efficient low pressure membrane filtration , 2020, Desalination.

[2]  M. Arasu,et al.  Aerva lanata-mediated bio-treated production of copper oxide nanoparticles, optimization by BBD–RSM method and it behaviour against water related mosquito , 2020, Applied Nanoscience.

[3]  W. Lau,et al.  3D CFD study on hydrodynamics and mass transfer phenomena for SWM feed spacer with different floating characteristics , 2020 .

[4]  S. Kerdi,et al.  Membrane filtration performance enhancement and biofouling mitigation using symmetric spacers with helical filaments , 2020 .

[5]  Heechul Choi,et al.  Bio-mimetically inspired 3D-printed honeycombed support (spacer) for the reduction of reverse solute flux and fouling of osmotic energy driven membranes , 2020 .

[6]  S. Hosseini,et al.  Comparative analysis of different static mixers performance by CFD technique: An innovative mixer , 2020, Chinese Journal of Chemical Engineering.

[7]  Teoh Hui Chieh,et al.  Study of the effect of spacer on the performance of spiral wound membrane for water treatment using CFD modelling , 2019, INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019).

[8]  M. El-Refaee,et al.  A 3D CFD comparative study between torsioned and non-torsioned net-type feed spacer in reverse osmosis , 2019, SN Applied Sciences.

[9]  C. Picioreanu,et al.  Hydrodynamic flow transition dynamics in a spacer filled filtration channel using direct numerical simulation , 2019, Journal of Membrane Science.

[10]  G. F. Fimbres Weihs,et al.  3D CFD study of the effect of multi-layer spacers on membrane performance under steady flow , 2019, Journal of Membrane Science.

[11]  Abd. Rahim Abu Talib,et al.  RSM approach for modeling and optimization of designing parameters for inclined fins of solar air heater , 2019, Renewable Energy.

[12]  Bing Liu,et al.  Impact of Modified Spacer on Flow Pattern in Narrow Spacer-Filled Channels for Spiral-Wound Membrane Modules , 2018, Environments.

[13]  Rashid K. Abu Al-Rub,et al.  Mass transfer analysis of ultrafiltration using spacers based on triply periodic minimal surfaces: Effects of spacer design, directionality and voidage , 2018, Journal of Membrane Science.

[14]  S. Kerdi,et al.  Fouling resilient perforated feed spacers for membrane filtration. , 2018, Water research.

[15]  Claire S. Adjiman,et al.  The effect of feed spacer geometry on membrane performance and concentration polarisation based on 3D CFD simulations , 2017 .

[16]  Johannes S. Vrouwenvelder,et al.  Characterization of feed channel spacer performance using geometries obtained by X-ray computed tomography , 2017, Biofouling of Membrane Systems.

[17]  D. B. Zodpe,et al.  Experimental and CFD investigation of convection heat transfer in solar air heater with reverse L-shaped ribs , 2016 .

[18]  C. P. Koutsou,et al.  A novel retentate spacer geometry for improved spiral wound membrane (SWM) module performance , 2015 .

[19]  Eliseu Monteiro,et al.  A CFD study of the hydrodynamics in a desalination membrane filled with spacers , 2014 .

[20]  A. Wexler,et al.  Development and testing of a transparent membrane biofouling monitor , 2014 .

[21]  David A. Ladner,et al.  Hydrodynamics of sinusoidal spacers for improved reverse osmosis performance , 2014 .

[22]  Martin Crapper,et al.  DEM simulations of initial deposition of colloidal particles around non-woven membrane spacers , 2013 .

[23]  Ashkan Iranshahi,et al.  Static mixing spacers for spiral wound modules , 2013 .

[24]  R. Vuthaluru,et al.  Effect of feed spacer arrangement on flow dynamics through spacer filled membranes , 2012 .

[25]  C. P. Koutsou,et al.  Towards optimization of spacer geometrical characteristics for spiral wound membrane modules , 2010 .

[26]  M. V. van Loosdrecht,et al.  Impact of flow regime on pressure drop increase and biomass accumulation and morphology in membrane systems. , 2010, Water research.

[27]  Johannes S. Vrouwenvelder,et al.  Three-dimensional modeling of biofouling and fluid dynamics in feed spacer channels of membrane devices , 2009 .

[28]  Eric M.V. Hoek,et al.  Modeling the impacts of feed spacer geometry on reverse osmosis and nanofiltration processes , 2009 .

[29]  M. V. van Loosdrecht,et al.  Biofouling of spiral-wound nanofiltration and reverse osmosis membranes: a feed spacer problem. , 2009, Water research.

[30]  M. Shakaib,et al.  CFD modeling for flow and mass transfer in spacer-obstructed membrane feed channels , 2009 .

[31]  S. G. Yiantsios,et al.  A numerical and experimental study of mass transfer in spacer-filled channels: Effects of spacer geometrical characteristics and Schmidt number , 2009 .

[32]  Satish Kumar,et al.  Predicting the effect of membrane spacers on mass transfer , 2008 .

[33]  Dianne E. Wiley,et al.  Numerical study of mass transfer in three-dimensional spacer-filled narrow channels with steady flow , 2007 .

[34]  Matthias Wessling,et al.  Multi-layer spacer geometries with improved mass transport , 2006 .

[35]  David F. Fletcher,et al.  Unsteady flows with mass transfer in narrow zigzag spacer-filled channels : A numerical study , 2006 .

[36]  A. B. de Haan,et al.  Novel spacers for mass transfer enhancement in membrane separations , 2005 .

[37]  F. Li,et al.  Experimental validation of CFD mass transfer simulations in flat channels with non-woven net spacers , 2004 .

[38]  A. B. de Haan,et al.  Optimization of commercial net spacers in spiral wound membrane modules , 2002 .

[39]  Viriato Semiao,et al.  The effect of the ladder-type spacers configuration in NF spiral-wound modules on the concentration boundary layers disruption☆ , 2002 .

[40]  A. B. de Haan,et al.  Optimization of non-woven spacers by CFD and validation by experiments , 2002 .

[41]  David F. Fletcher,et al.  Simulation of the Flow around Spacer Filaments between Channel Walls. 2. Mass-Transfer Enhancement , 2002 .

[42]  Viriato Semiao,et al.  Flow management in nanofiltration spiral wound modules with ladder-type spacers , 2002 .

[43]  Sandeep K. Karode,et al.  Flow visualization through spacer filled channels by computational fluid dynamics I. , 2001 .

[44]  Dianne E. Wiley,et al.  CFD simulations of net-type turbulence promoters in a narrow channel , 2001 .

[45]  Vítor Geraldes,et al.  Nanofiltration mass transfer at the entrance region of a slit laminar flow , 1998 .

[46]  David A. Ladner,et al.  Mitigating membrane fouling with sinusoidal spacers , 2019, DESALINATION AND WATER TREATMENT.

[47]  H. Arafat,et al.  3D printed feed spacers based on triply periodic minimal surfaces for flux enhancement and biofouling mitigation in RO and UF , 2018 .

[48]  Jon G. Pharoah,et al.  Unsteady Laminar to Turbulent Flow in a Spacer-Filled Channel , 2014 .

[49]  Johannes S. Vrouwenvelder,et al.  Biofouling in spiral wound membrane systems: Three-dimensional CFD model based evaluation of experimental data , 2010 .

[50]  G. Schock,et al.  Mass transfer and pressure loss in spiral wound modules , 1987 .