Differential tuning oscillators with reduced flicker noise upconversion

The adoption of differential tuning in oscillators provides cancellation of common-mode disturbances, and thus, it is expected to lower phase noise and power supply pulling. However, the direct application of differential tuning increases the capacitor nonlinearity, and in turn, it can raise the flicker-induced phase noise. This upconversion mechanism, based on non-linearities, is quantitatively assessed and a modified configuration circumventing this phenomenon is proposed and applied to the design of a 1.8-GHz LC oscillator in 0.35-/spl mu/m CMOS technology. The simulated 1/f/sup 3/, phase noise is reduced by 20 dB, without impairing the tuning range and supply pulling.

[1]  M. Tiebout,et al.  Low-power low-phase-noise differentially tuned quadrature VCO design in standard CMOS , 2001, IEEE J. Solid State Circuits.

[2]  Salvatore Levantino,et al.  Frequency dependence on bias current in 5 GHz CMOS VCOs: impact on tuning range and flicker noise upconversion , 2002, IEEE J. Solid State Circuits.

[3]  Robert G. Meyer,et al.  Distortion in variable-capacitance diodes , 1975 .

[4]  V. Boccuzzi,et al.  Differentially "bathtub"-tuned CMOS VCO using inductively coupled varactors , 2003, ESSCIRC 2004 - 29th European Solid-State Circuits Conference (IEEE Cat. No.03EX705).

[5]  P.R. Gray,et al.  A 1.4 GHz differential low-noise CMOS frequency synthesizer using a wideband PLL architecture , 2000, 2000 IEEE International Solid-State Circuits Conference. Digest of Technical Papers (Cat. No.00CH37056).

[6]  A. Abidi,et al.  Varactor characteristics, oscillator tuning curves, and AM-FM conversion , 2003, IEEE J. Solid State Circuits.