Scour at culvert outlets as influenced by the turbulent flow structure

Scouring downstream of culvert outlets is a common problem that can lead to damage to the culvert structure and neighbouring land. This paper presents measurements of the turbulent flow structure within scour holes downstream of pipe culvert outlets at different stages of development. Velocities have been recorded in scour holes at four stages of formation to enable changes in flow structure to be observed as the scour hole develops. The analysis of mean velocities, turbulence intensities, Reynolds stresses and near-bed bursting structure has led to a foundational understanding of the flow structure in scour holes. Initial scour hole development is a result of high velocities exceeding the critical velocity for sediment transport whilst further development results in a reduction in the magnitude of the near-bed velocities and an asymptotic increase in scour depth associated with the turbulent structure of the flow. Towards the downstream end of the scour holes the jet comes into contact with the bed and flow structures similar to those observed downstream of backward facing steps are noted.

[1]  James M. Wallace,et al.  The wall region in turbulent shear flow , 1972, Journal of Fluid Mechanics.

[2]  伊勢屋 ふじこ,et al.  Effect of dune development on sediment suspension under unsteady flow conditions , 1986 .

[3]  S. Mclean,et al.  Mean flow and turbulence fields over two‐dimensional bed forms , 1993 .

[4]  Anthony J. Grass,et al.  Initial Instability of Fine Bed Sand , 1970 .

[5]  W. Willmarth,et al.  Measurements of the structure of the Reynolds stress in a turbulent boundary layer , 1973, Journal of Fluid Mechanics.

[6]  Khm Ali,et al.  Local Scour Caused by Submerged Wall Jets. , 1986 .

[7]  P. Thorne,et al.  In situ acoustic measurements of marine gravel threshold and transport , 1989 .

[8]  Bruce W. Melville,et al.  FLOW CHARACTERISTICS IN LOCAL SCOUR AT BRIDGE PIERS , 1977 .

[9]  Nallamuthu Rajaratnam,et al.  Erosion By Circular Turbulent Wall Jets , 1977 .

[10]  Alex J. Sutherland,et al.  Proposed mechanism for sediment entrainment by turbulent flows , 1967 .

[11]  Iehisa Nezu,et al.  Turbulence in open-channel flows , 1993 .

[12]  M. Raupach,et al.  Conditional statistics of Reynolds stress in rough-wall and smooth-wall turbulent boundary layers , 1981, Journal of Fluid Mechanics.

[13]  J P Bohan.  EROSION AND RIPRAP REQUIREMENTS AT CULVERT AND STORM-DRAIN OUTLETS; HYDRAULIC LABORATORY INVESTIGATION , 1970 .

[14]  A. Müller,et al.  On the vortex formation in the mixing layer behind dunes , 1986 .

[15]  Steven R. Abt,et al.  Unified Culvert Scour Determination , 1984 .

[16]  Philip B. Williams,et al.  Initiation of Ripples on Flat Sediment Beds , 1971 .

[17]  W. C. Mih,et al.  Mean and Turbulent Velocities for Plane Jet , 1972 .

[18]  Clayton L. Anderson,et al.  A comprehensive generalized study of scour at cantilevered pipe outlets , 1988 .

[19]  Siow-Yong Lim.  SCOUR BELOW UNSUBMERGED FULL-FLOWING CULVERT OUTLETS. , 1995 .

[20]  R. L. Shreve,et al.  Role of Near‐Bed Turbulence Structure in Bed Load Transport and Bed Form Mechanics , 1995 .

[21]  P. Davies.  Structure of turbulence , 1973 .

[22]  Kamil Ali,et al.  Localized scour downstream of a deeply submerged horizontal jet , 1991 .

[23]  Steven R. Abt,et al.  Scour at culvert outlets in mixed bed materials. , 1982 .

[24]  Iehisa Nezu,et al.  Experimental investigation on turbulent structure of backward-facing step flow in an open channel , 1987 .

[25]  B. Melville.  Local scour at bridge sites , 1975 .