Studies on conducting polymer electroactive paper actuators: effect of humidity and electrode thickness

Actuators based on cellulose paper with conducting polymer (CP-EAPap) as an electrode material were constructed. The bilayer and trilayer types of actuators were fabricated by depositing conducting polypyrrole on one side and two sides of cellophane paper respectively, which was previously gold coated. By varying the deposition time, the electrode thickness was manipulated. The performance of these two types of actuators was compared with respect to humidity changes and thickness variation. The electrode thickness plays a key role in the displacement behavior of these types of actuators. The best performance at higher humidity is also characteristic of CP-EAPap actuators. The possible mechanism of actuation is addressed in this paper.

[1]  R. Pelrine,et al.  Electrostriction of polymer dielectrics with compliant electrodes as a means of actuation , 1998 .

[2]  Arthur J. Epstein,et al.  Towards optimization of electrical and mechanical properties of polyaniline: Is crosslinking between chains the key? , 1993 .

[3]  Danilo De Rossi,et al.  Actuative properties of polyaniline fibers under electrochemical stimulation , 1998 .

[4]  A. Heeger,et al.  Counter-ion induced processibility of conducting polyaniline and of conducting polyblends of polyaniline in bulk polymers , 1992 .

[5]  Sungryul Yun,et al.  New electro-active paper actuator using conducting polypyrrole: actuation behaviour in LiClO4 acetonitrile solution , 2005 .

[6]  Charles Becht,et al.  Micro Electromechanical Actuators Based on Conducting Polymers , 1991 .

[7]  R. V. Gregory,et al.  Improved solution stability and spinnability of concentrated polyaniline solutions using N,N′-dimethyl propylene urea as the spin bath solvent , 1995 .

[8]  E. Smela,et al.  Controlled Folding of Micrometer-Size Structures , 1995, Science.

[9]  P. Hourquebie,et al.  Microwave properties of conductive polymers , 1994 .

[10]  G. Wallace,et al.  Development of an all-polymer, axial force electrochemical actuator , 1999 .

[11]  Zhang,et al.  Giant electrostriction and relaxor ferroelectric behavior in electron-irradiated poly(vinylidene fluoride-trifluoroethylene) copolymer , 1998, Science.

[12]  J. O. Simpson,et al.  Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators and artificial muscles - a review , 1998 .

[13]  H. Yan,et al.  All‐Solid Actuator Consisting of Polyaniline Film and Solid Polymer Electrolyte , 2003 .

[14]  A. MacDiarmid,et al.  Artificial muscle: electromechanical actuators using polyaniline films , 1994 .

[15]  Hidenori Okuzaki,et al.  Adsorption-induced bending of polypyrrole films and its application to a chemomechanical rotor , 1996 .

[16]  Qibing Pei,et al.  Electrochemical muscles: Bending strips built from conjugated polymers , 1993 .

[17]  Jaehwan Kim,et al.  Effects of electrical properties of papers and electrodes for electroactive paper actuators , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[18]  Hidenori Okuzaki,et al.  Electrically induced contraction of polypyrrole film in ambient air , 1998 .

[19]  Toribio F. Otero,et al.  Electrochemomechanical properties from a bilayer: polypyrrole / non-conducting and flexible material — artificial muscle , 1992 .

[20]  Jaehwan Kim,et al.  Electro-active paper actuators , 2002 .

[21]  Toribio F. Otero,et al.  Artificial muscles from bilayer structures , 1993 .

[22]  Ingemar Lundström,et al.  Conducting polymers as artificial muscles: challenges and possibilities , 1993 .