Automatic Location of Swarm Earthquakes from Local Network Data

An advanced method of automated seismic phase picking and exact location and magnitude determination of swarm micro-earthquakes from local network data is presented. The phase picker is applied in two steps: first, S-wave groups are identified using a polarisation detector, and then corresponding P-wave groups are searched for. The times of maximum P- and S-amplitudes are then used as starting points for the determination of accurate P- and S-arrival times. The maximum S-wave amplitudes are utilised for determining local magnitudes. The whole procedure is checked by simultaneous preliminary hypocentre location providing estimates of local magnitudes and a compatibility check of the candidate P- and S-phases. The closest station to the earthquake cluster is used as a master, and the phase search at the remaining stations is governed by the P- and S-phases identified at the master station. Thanks to the use of apriori information on the approximate position of hypocentres, the procedure is also capable of picking the individual P- and S-phases of sequences of overlapping swarm events. The performance of the procedure was tested by comparison of the automatically and interactively created catalogues of the January 1997 NW-Bohemia micro-earthquake swarm. With stations located at epicentral distances between 0 and 20 km, the difference between hypocentre coordinates obtained by automatic and interactive processing did not exceed 80 m for 86% events. All events above magnitude 0.5 were identified, and the automatically determined polarity of first P-wave motion proved to be correct in 89% of them.