A consistent methodology for the out-of-plane buckling resistance of prismatic steel beam-columns

Abstract This paper presents a design proposal for the out-of-plane buckling resistance of prismatic beam-columns subject to axial compression and uniaxial major-axis bending that was developed based on the well-known Ayrton-Perry format. Firstly, the relevant theoretical background is summarized, closely following the theoretical derivation performed by Szalai and Papp (2010). Secondly, the required transformations for the engineering application of the design procedure are detailed and extended to arbitrary bending moment distributions. Appropriate generalized initial imperfection factors for the out-of-plane buckling of beam-columns are defined so as to achieving complete consistency across the stability verifications for columns, beams and beam-columns. The proposed procedure is subsequently validated against a large set of advanced numerical simulations. A good agreement was found between the numerical results and the estimates provided by the proposed design procedure, both in terms of the overall trend and the specific quantitative results. Based on a statistical assessment, the comparison with the interaction expression of Eurocode 3 (2005) (method 2) showed that this proposal slightly outperforms the Eurocode procedure, both in terms of average values and dispersion of results.

[1]  Ronald D. Ziemian,et al.  Guide to stability design criteria for metal structures , 2010 .

[2]  Nicholas S. Trahair,et al.  Flexural-Torsional Buckling of Structures , 1993 .

[3]  Ulf Wickström,et al.  Comments on calculation of temperature in fire-exposed bare steel structures in prEN 1993-1-2: Eurocode 3—design of steel structures—Part 1–2: general rules—structural fire design , 2005 .

[4]  Richard Greiner,et al.  New design curves for lateral–torsional buckling—Proposal based on a consistent derivation , 2010 .

[5]  Luís Simões da Silva,et al.  Development of a consistent buckling design procedure for tapered columns , 2012 .

[6]  Andreas Taras,et al.  Contribution to the Development of Consistent Stability Design Rules for Steel Members , 2010 .

[7]  Carlos Rebelo,et al.  Statistical evaluation of the lateral-torsional buckling resistance of steel I-beams, Part 1: Variability of the Eurocode 3 resistance model , 2009 .

[8]  Luís Simões da Silva,et al.  Development of a consistent design procedure for lateral-torsional buckling of tapered beams , 2013 .

[9]  Jean-Pierre Jaspart,et al.  Rules for member stability in EN 1993-1-1 background documentation and design guidelines , 2006 .

[10]  József Szalai,et al.  On the theoretical background of the generalization of Ayrton–Perry type resistance formulas , 2010 .

[11]  Luís Simões da Silva,et al.  Design of Steel Structures: Eurocode 3: Design of Steel Structures, Part 1-1: General Rules and Rules for Buildings , 2010 .