Using polymers to improve the rutting resistance of asphalt concrete

Abstract This study assesses rutting on two types of modified asphalt mixtures containing: (i) amorphous polyolefin polymer and (ii) a particular polymer obtained by combining LDPE (low density polyethylene) and EVA (ethyl-vinyl-acetate). Rutting tests were performed by a wheel tracking device. Stiffness and fatigue tests were carried out to confirm the performance of the asphalt mixtures. The testing showed that polymer modification in this study improved rut resistance without compromising the stiffness and fatigue behavior. The rutting results were fit in the NCHRP 1-37A model and the in situ rutting performance of asphalt mixtures can be predicted.

[1]  Ulf Isacsson,et al.  Testing and appraisal of polymer modified road bitumens—state of the art , 1995 .

[2]  B. Kök,et al.  Comparison of permanent deformation and fatigue resistance of hot mix asphalts prepared with the same performance grade binders , 2012 .

[3]  N. Habib,et al.  Rheological Properties of Polyethylene and Polypropylene Modified Bitumen , 2010 .

[4]  Tan Yiqiu,et al.  Effect of polyethylene on life of flexible pavements , 2009 .

[5]  Peter E. Sebaaly,et al.  Evaluation of Polymer-Modified Asphalt Concrete Mixtures , 1995 .

[6]  M. M. C. Forte,et al.  Rheological evaluation of polymer-modified asphalt binders , 2008 .

[7]  E. Toraldo,et al.  Effects of polymer additives on bituminous mixtures , 2014 .

[8]  Tao Xu,et al.  Investigation into causes of in-place rutting in asphalt pavement , 2012 .

[9]  Kwang W. Kim,et al.  Framework for developing a static strength test for measuring deformation resistance of asphalt concrete mixtures , 2007 .

[10]  Lei Gao,et al.  Evaluating the rutting resistance of asphalt mixtures using an advanced repeated load permanent deformation test under field conditions , 2014 .

[11]  M. Witczak,et al.  Simple performance test for permanent deformation of asphalt mixtures , 2003 .

[12]  Gordon Airey,et al.  Rheological evaluation of ethylene vinyl acetate polymer modified bitumens , 2002 .

[13]  Jiri Stastna,et al.  Rheology of asphalts modified with glycidylmethacrylate functionalized polymers. , 2004, Journal of colloid and interface science.

[14]  Gordon Airey,et al.  Fundamental Binder and Practical Mixture Evaluation of Polymer Modified Bituminous Materials , 2004 .

[15]  J. L. Fernandes,et al.  Analysis of use of natural fibers and asphalt rubber binder in discontinuous asphalt mixtures , 2011 .

[16]  Hao Wang,et al.  Evaluation of permanent deformation of asphalt mixtures using different laboratory performance tests , 2014 .

[17]  Yufei Wu,et al.  Unified stress–strain model of concrete for FRP-confined columns , 2012 .

[18]  F. Nejad,et al.  Mechanistic approach for fiber and polymer modified SMA mixtures , 2012 .

[19]  Y. Kim.  MODELING OF ASPHALT CONCRETE , 2007 .

[20]  Ulf Isacsson,et al.  Modification of road bitumens with thermoplastic polymers , 2000 .

[21]  Felice Giuliani,et al.  Structural and rheological characterization of wax modified bitumens , 2012 .

[22]  G. Airey.  Rheological properties of styrene butadiene styrene polymer modified road bitumens , 2003 .

[23]  Jorge C. Pais,et al.  Evaluating permanent deformation in asphalt rubber mixtures , 2009 .

[24]  Mohamed Rehan Karim,et al.  Experimental characterization of rutting performance of Polyethylene Terephthalate modified asphalt mixtures under static and dynamic loads , 2014 .