Numerical simulation and process optimization of an aluminum holding furnace based on response surface methodology and uniform design

It is indispensable for strengthening smelting process and controlling fine to understand metallurgical behaviors and mechanism of production process of aluminum holding furnaces. A CFD (computational fluid dynamics) compressive process model was developed and integrated with energy distribution regime using user subroutines based on FLUENT code. Integrated intelligence ideas with a combination of response surface methodology and uniform design was employed to quantitatively achieve the inherent laws of thermal characteristics and mechanism behind various factors. The optimal scheme obtained from the compromise of the two desirable responses was as follows: flue position of same side, oxidant type of pure oxygen, air preheated temperature of 719 K, natural gas velocity of 108.88 m/s, burner height of 1150 mm, vertical burner angle of 5°, pool depth of 625 mm, horizontal spacing between burners of 2050 mm, height-radius ratio of 0.6, air–fuel ratio of 1.04, and burner load ratio of 1:1. The maximal end aluminum temperature uniform coefficient of 12.85% and minimal energy consumption per ton of aluminum of 0.01092 kg ce/t-Al were obtained. Confirmed experiments demonstrated that such a combination of the CFD, RSM (response surface methodology) and UD (uniform design) is a powerful and useful approach for process optimization of aluminum holding furnaces.

[1]  John D. Fieldhouse,et al.  The effects of using biodiesel on CI (compression ignition) engine and optimization of its production by using response surface methodology , 2013 .

[2]  Jacques Foct,et al.  Uniform design method for optimization of process parameters of plasma sprayed TiN coatings , 2003 .

[3]  Naijun Zhou,et al.  Combustion and energy balance of aluminum holding furnace with bottom porous brick purging system , 2012 .

[4]  Jie-min Zhou,et al.  Multiple-response optimization for melting process of aluminum melting furnace based on response surface methodology with desirability function , 2012 .

[5]  Numerical simulation of the flow and the solid transport when tilting a holding furnace , 2000 .

[6]  Hanqing Yu,et al.  Optimization of the coagulation-flocculation process for pulp mill wastewater treatment using a combination of uniform design and response surface methodology. , 2011, Water research.

[7]  Fred J. Hickernell,et al.  A generalized discrepancy and quadrature error bound , 1998, Math. Comput..

[8]  Abdurrahman Tanyolaç,et al.  Optimization of electrochemical treatment of industrial paint wastewater with response surface methodology. , 2007, Journal of hazardous materials.

[9]  Ya-Jie Tang,et al.  Quantitative analysis for the effect of plant oil and fatty acid on Tuber melanosporum culture by uniform design combined with partial least squares regression , 2010, Applied Microbiology and Biotechnology.

[10]  Seung-Han Yang,et al.  Multiple-response optimization for micro-endmilling process using response surface methodology , 2011 .

[11]  N. Draper,et al.  Applied Regression Analysis , 1966 .

[12]  Naijun Zhou,et al.  Numerical simulation on melt flow with bubble stirring and temperature field in aluminum holding furnace , 2011 .

[13]  Jie-min Zhou,et al.  Optimization of parameters for an aluminum melting furnace using the Taguchi approach , 2012 .

[14]  Douglas C. Montgomery,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[15]  Nai-jun Zhou,et al.  Numerical simulation of aluminum holding furnace with fluid-solid coupled heat transfer , 2010 .

[16]  Zhaojing Wang,et al.  Optimization of polysaccharides extraction from Gynostemma pentaphyllum Makino using Uniform Design , 2007 .

[17]  Wing-Hong Chan,et al.  Optimization of fabrication conditions of high-efficiency ultrafiltration membranes using methods of uniform design and regression analysis , 2000 .