Improvement in the oxidation resistance of Nb–Ti–Si–Cr–Al–Hf alloys containing alloyed Ge and B

[1]  Chungen Zhou,et al.  Hot corrosion behaviour of Nbss/Nb5Si3 in situ composites in the mixture of Na2SO4 and NaCl melts , 2013 .

[2]  L. Jia,et al.  Microstructure and room-temperature fracture toughness of directionally solidified Nb–Si–Ti–Cr–Al–Hf alloy , 2013 .

[3]  Daniel Brendan Voglewede.  The effects of uncommon silicides on the oxidation of alloys from the Nb-Cr-Si system , 2012 .

[4]  Zifu Li,et al.  Study of the effect of Cr and Ti additions in the microstructure of Nb–18Si–5Ge based in-situ composites , 2012 .

[5]  P. Berthod,et al.  On the oxidation mechanism of niobium-base in situ composites , 2012 .

[6]  S. Varma,et al.  Characterization of microstructures and oxidation behaviour of Nb-20Si-20Cr-5Al alloy , 2011 .

[7]  Ying Yang,et al.  Thermodynamic modeling of the Nb-rich corner in the Nb–Si–B system , 2011 .

[8]  J. Perepezko.  The Hotter the Engine, the Better , 2009, Science.

[9]  Liu Guangming,et al.  Effect of Al additions on the oxidation behavior of Laves phase NbCr2 alloys at 1373 K and 1473 K , 2009 .

[10]  Chungen Zhou,et al.  Experimental study and modeling of high temperature oxidation of Nb-base in situ composites , 2009 .

[11]  G. Shao,et al.  Oxidation of Nb–Si–Cr–Al in situ composites with Mo, Ti and Hf additions , 2006 .

[12]  Y. Kimura,et al.  Fracture toughness and high temperature strength of unidirectionally solidified Nb–Si binary and Nb–Ti–Si ternary alloys , 2006 .

[13]  P. Tsakiropoulos,et al.  Effect of Al, Cr and Ta additions on the oxidation behaviour of Nb–Ti–Si in situ composites at 800 °C , 2006 .

[14]  M. Kramer,et al.  Microstructure and oxidation behavior of Nb–Mo–Si–B alloys , 2006 .

[15]  Kwai S. Chan,et al.  Cyclic oxidation response of multiphase niobium-based alloys , 2004 .

[16]  B. Bewlay,et al.  A review of very-high-temperature Nb-silicide-based composites , 2003 .

[17]  J. H. Westbrook,et al.  Ultrahigh-Temperature Materials for Jet Engines , 2003 .

[18]  Chao‐Nan Xu,et al.  Microstructure, mechanical properties and oxidation behavior of powder compacts of the Nb–Si–B system prepared by spark plasma sintering , 1999 .

[19]  Yi-Rong He,et al.  Oxidation-resistant Ge-doped silicide coating on Cr-Cr2Nb alloys by pack cementation , 1997 .

[20]  B. Bewlay,et al.  The balance of mechanical and environmental properties of a multielement niobium-niobium silicide-basedIn Situ composite , 1996 .

[21]  B. Cockeram.  Growth and oxidation resistance of boron-modified and germanium-doped silicide diffusion coatings formed by the halide-activated pack cementation method , 1995 .

[22]  B. Cockeram,et al.  Oxidation-resistant boron- and germanium-doped silicide coatings for refractory metals at high temperature , 1995 .

[23]  E. Fitzer,et al.  Carbon, carbide and silicide coatings , 1976 .

[24]  O. Kubaschewski,et al.  Oxidation of metals and alloys , 1953 .