Stability analysis of membrane-reinforced curved earth retaining walls, using a multiphase approach

The stability analysis of curved earth retaining walls, stabilized by reinforcing membranes, is investigated by means of a multiphase model developed in the framework of the yield design approach. This model is an extension of that previously developed for soils reinforced by linear inclusions. It combines the advantage of a homogenization approach in terms of improved computational efficiency, with its capability to account for a specific soil–reinforcement failure condition, in a rational and systematic way. Application of this model is performed on the illustrative example of a cylindrical-reinforced retaining wall by means of the kinematic approach of yield design, which provides upper bound estimates for the retaining wall stability factor. Nondimensional charts are finally presented assessing the influence of relevant parameters such as the curvature of the wall, the length of the reinforcing membranes or the reinforcement pull-out resistance. Copyright © 2009 John Wiley & Sons, Ltd.

[1]  C. R. Patra,et al.  Bearing capacity of embedded strip foundation on geogrid-reinforced sand , 2005 .

[2]  Mostafa A. El Sawwaf,et al.  Behavior of strip footing on geogrid-reinforced sand over a soft clay slope , 2007 .

[3]  Surendra Kumar,et al.  Analysis of square and rectangular footings subjected to eccentric-inclined load resting on reinforced sand , 2007 .

[4]  Thai Son Quang,et al.  A multiphase approach to the stability analysis of reinforced earth structures accounting for a soil–strip failure condition , 2009 .

[5]  Dov Leshchinsky,et al.  Stability of Membrane Reinforced Slopes , 1985 .

[7]  Wiem Ben Hassine,et al.  A macroscopic model for materials reinforced by flexible membranes , 2008 .

[8]  G. D. Skinner,et al.  Design and behaviour of a geosynthetic reinforced retaining wall and bridge abutment on a yielding foundation , 2005 .

[9]  Bruno Sudret,et al.  Micropolar multiphase model for materials reinforced by linear inclusions , 2000 .

[10]  Jean Salençon,et al.  Introduction to the yield design theory and its applications to soil mechanics , 1990 .

[11]  Dov Leshchinsky,et al.  SEISMIC DESIGN AND PERFORMANCE OF GEOSYNTHETIC-REINFORCED SOIL STRUCTURES , 1997 .

[12]  Kazem Fakharian,et al.  Static and seismic numerical modeling of geosynthetic-reinforced soil segmental bridge abutments , 2007 .

[13]  P. de Buhan,et al.  A multiphase constitutive model of reinforced soils accounting for soil-inclusion interaction behaviour , 2003 .

[14]  Jie Han,et al.  The Design of Geosynthetic Reinforced Foundations , 1998 .