Study on Active Snow and Ice Melting Tests and Stability of Conductive Rubber Composites for Roads

[1]  Bingxi Li,et al.  Snow melting on a road unit as affected by thermal fluids in different embedded pipes , 2021 .

[2]  L. Sorelli,et al.  Development of electrically conductive concrete and mortars with hybrid conductive inclusions , 2020, Construction and Building Materials.

[3]  Hai-bin Wei,et al.  Durability and Electrical Conductivity of Carbon Fiber Cloth/Ethylene Propylene Diene Monomer Rubber Composite for Active Deicing and Snow Melting , 2019, Polymers.

[4]  F. Autelitano,et al.  Winter highway maintenance strategies: Are all the sodium chloride salts the same? , 2019, Construction and Building Materials.

[5]  Jinyu Xu,et al.  Investigation on dielectric properties and microwave heating efficiencies of various concrete pavements during microwave deicing , 2019, Construction and Building Materials.

[6]  J. Su,et al.  Smart bituminous material combining anti-icing and self-healing functions using electrothermal graphene microcapsules containing oily rejuvenator , 2019, Construction and Building Materials.

[7]  Shaopeng Wu,et al.  Enhanced ice and snow melting efficiency of steel slag based ultra-thin friction courses with steel fiber , 2019, Journal of Cleaner Production.

[8]  Miroslava Kavgic,et al.  Feasibility study of snow melting system for bridge decks using geothermal energy piles integrated with heat pump in Canada , 2019, Renewable Energy.

[9]  I. Ho,et al.  Alternative hydronic pavement heating system using deep direct use of geothermal hot water , 2019, Cold Regions Science and Technology.

[10]  E. Şevkat,et al.  Electrical resistance heating for deicing and snow melting applications: Experimental study , 2019, Cold Regions Science and Technology.

[11]  E. Heymsfield,et al.  Hydronic heated pavement system performance using a solar water heating system with heat pipe evacuated tube solar collectors , 2019, Solar Energy.

[12]  Zhenjun Wang,et al.  Microwave deicing for asphalt mixture containing steel wool fibers , 2019, Journal of Cleaner Production.

[13]  Shaopeng Wu,et al.  Enhanced heat release and self-healing properties of steel slag filler based asphalt materials under microwave irradiation , 2018, Construction and Building Materials.

[14]  Alvaro Garcia,et al.  Mechanical and healing properties of asphalt mixes reinforced with different types of waste and commercial metal particles , 2018, Journal of Cleaner Production.

[15]  A. Sha,et al.  Autonomous microscopic bunch inspection using region-based deep learning for evaluating graphite powder dispersion , 2018, Construction and Building Materials.

[16]  Chaohui Wang,et al.  Heat conduction effect of steel bridge deck with conductive gussasphalt concrete pavement , 2018 .

[17]  Carl-Eric Hagentoft,et al.  Anti-icing of road surfaces using Hydronic Heating Pavement with low temperature , 2018 .

[18]  K. Gopalakrishnan,et al.  Influence of mix design variables on engineering properties of carbon fiber-modified electrically conductive concrete , 2017 .

[19]  M. Elseifi,et al.  Evaluation of Self-Healing of Asphalt Concrete through Induction Heating and Metallic Fibers , 2017 .

[20]  Kai Liu,et al.  Energy consumption and utilization rate analysis of automatically snow-melting system in infrastructures by thermal simulation and melting experiments , 2017 .

[21]  Jun Yang,et al.  Electrical and mechanical properties of asphalt concrete containing conductive fibers and fillers , 2016 .

[22]  Yue Xiao,et al.  A review on hydronic asphalt pavement for energy harvesting and snow melting , 2015 .

[23]  Yiqiu Tan,et al.  Modeling and operation strategy of pavement snow melting systems utilizing low-temperature heating fluids , 2015 .

[24]  Yan Liu,et al.  Automatically melting snow on airport cement concrete pavement with carbon fiber grille , 2014 .

[25]  S. French,et al.  Increased frequency and severity of developmental deformities in rough-skinned newt (Taricha granulosa) embryos exposed to road deicing salts (NaCl & MgCl2). , 2013, Environmental pollution.

[26]  Jianjun Zheng,et al.  Concrete pavement deicing with carbon fiber heating wires , 2011 .

[27]  Mehmet Esen,et al.  Experimental investigation of using ground source heat pump system for snow melting on pavements and bridge decks , 2010 .

[28]  Huajun Wang,et al.  Experimental investigation of hydronic snow melting process on the inclined pavement , 2010 .

[29]  Ghim Ping Ong,et al.  Wet-Pavement Hydroplaning Risk and Skid Resistance: Analysis , 2008 .

[30]  Christopher Y. Tuan,et al.  Roca Spur Bridge: The Implementation of an Innovative Deicing Technology , 2008 .

[31]  S. Rees,et al.  Modeling snow melting on heated pavement surfaces. Part II: Experimental validation , 2007 .

[32]  S. Rees,et al.  Modeling snow melting on heated pavement surfaces. Part I: Model development , 2007 .

[33]  D. Chung,et al.  Deformation adjustment of concrete beams laminated with carbon fiber mats , 2007 .

[34]  Wilfrid A. Nixon,et al.  Damaging effects of deicing chemicals on concrete materials , 2006 .

[35]  Simon J. Rees,et al.  Transient Analysis of Snow-Melting System Performance , 2002 .