Environment assisted fatigue

Part 1 Welded joints: corrosion fatigue of large welded tubular joints, J. Kerr et al effects of temperature and dissolved oxygen in seawater on the fatigue strength of welded steel joints, H. Ouchi et al corrosion-fatigue tests of welded tubular "T" joints under variable amplitude loading, W.P. Sham et al corrosion-fatigue crack growth rate in a C-Mn steel and in its welded joints in seawater, L. Bertini the effects of stress waveform and frequency on fatigue crack growth rates in a steel immersed in seawater, H. Ouchi et al a quantitative determination of crack closure effects on fatigue properties of cathodically protected steel in seawater, E. Bardal et al the relative severity of natural and synthetic seawaters on the fatigue behaviour of cathodically protected steel, C.C. Monahan and R.M. Hopkins the influence of hydrogenating environments on crack propagation in metals, V.V. Panasyuk and V.S. Kharin the relative importance of crack-tip charging and bulk charging in hydrogen - assisted cracking in aqueous solutions, A. Turnbull et al corrosion fatigue crack propagation in a Duplex stainless steel, M.C. Mayaki and J.E. King polarization experiments with constant K for the examination of competing environmental mechanisms in corrosion fatigue, D.M. Shutter and I.M. Austen corrosion fatigue crack retardation and enhancement and fracture surface reconstruction technique, K. Komai the influence of environment on fatigue crack growth mechanisms, A. Bignonnet et al interactions of temper embrittlement and environment during fatigue of pressure vessel steels, C.A. Hippsley and S.G. Druce effects of environment on the occurence of intergranular facets during fatigue crack propagation in 9Cr-1Mo steel, K. Nishioka and J.F. Knott environment-assisted aerospace fatigue problems in the Netherlands, R.J.H. Wanhill influence of moisture on the crack propagation in A1-Zn-Mg single crystals, H.J. Gudladt et al the corrosion fatigue behaviour of an aluminium-lithium alloy, G.S. Chen and D.J. Duquette the role of surface microcracks in aqueous corrosion fatigue damage, T. Magnin. Part 2 Corrosion fatigue endurance and short crack growth: the corrosion fatigue of a 13 percent chronium turbine blade steel in a condensing steam environment, J. Congelton and T.P. Wilks two-dimensional film opening model for pit generation in the corrosion fatigue crack initiation process of a ferritic stainless steel, Y. Kimura et al the environmental performance of higher strength steels for offshore applications, I.S. Cole et al the initiation and propagation of fatigue cracks under the influence of fretting in 0.64C roping steel wires in air and seawater, M. Takeuchi and R.B. Waterhouse the role of corrosion in the initiation and growth of corrosion fatigue cracks, R.A. Cottis et al influence of cathodic protection on the initiation and growth of small cracks in steel under fatigue loading in seawater, E. Maahn and H.P. Nielsen.