Antagonistically actuated compliant joint: Torque and stiffness control

The current research effort in the design of lightweight and safe robots is resulting in increased interest for the development of variable stiffness actuators. Antagonistic pneumatic muscle actuators (pMAs) have been proposed for this purpose, due to their inherent nonlinear spring behavior resulting from both air compressibility and their nonlinear force-length relation. This paper addresses the simultaneous torque and stiffness control of an antagonistically actuated joint with pneumatic muscles driven by compact, fast-switching solenoid valves. This strategy allows compensation of unmodeled joint dynamics while adjusting the joint stiffness depending on the task requirements. The proposed controller is based on a sliding mode force control applied to an average model of the valve-pneumatic muscle system. This was necessary to cope with both the well known model uncertainties of the pMA and the discontinuous on-off behavior of the solenoid valves. Preliminary experimental results verified the effectiveness of the proposed implementation.

[1]  Oussama Khatib,et al.  A hybrid actuation approach for human-friendly robot design , 2008, 2008 IEEE International Conference on Robotics and Automation.

[2]  Antonio Bicchi,et al.  Compliant design for intrinsic safety: general issues and preliminary design , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[3]  Koichi Koganezawa,et al.  Antagonistic control of multi-DOF joint by using the actuator with non-linear elasticity , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[4]  Giorgio Grioli,et al.  VSA-II: a novel prototype of variable stiffness actuator for safe and performing robots interacting with humans , 2008, 2008 IEEE International Conference on Robotics and Automation.

[5]  Alin Albu-Schäffer,et al.  DLR's torque-controlled light weight robot III-are we reaching the technological limits now? , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[6]  Gary M. Bone,et al.  Accurate position control of a pneumatic actuator using on/off solenoid valves , 1997, Proceedings of International Conference on Robotics and Automation.

[7]  Antonio Bicchi,et al.  Adaptive simultaneous position and stiffness control for a soft robot arm , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  D. W. Repperger,et al.  Nonlinear feedback controller design of a pneumatic muscle actuator system , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[9]  Alessandro De Luca,et al.  Collision Detection and Safe Reaction with the DLR-III Lightweight Manipulator Arm , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[10]  Weiping Li,et al.  Applied Nonlinear Control , 1991 .

[11]  Kanji Inoue,et al.  Rubbertuators and applications for robots , 1988 .

[12]  Stephen P. DeWeerth,et al.  Biologically Inspired Joint Stiffness Control , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[13]  Bram Vanderborght,et al.  Exploiting Natural Dynamics to Reduce Energy Consumption by Controlling the Compliance of Soft Actuators , 2006, Int. J. Robotics Res..

[14]  Jianlong Zhang,et al.  Sliding mode approach to PWM-controlled pneumatic systems , 2002, Proceedings of the 2002 American Control Conference (IEEE Cat. No.CH37301).

[15]  Bertrand Tondu,et al.  Robust stabilization and tracking for robotic manipulators with artificial muscles , 1996, Int. J. Syst. Sci..

[16]  G. Hirzinger,et al.  A new variable stiffness design: Matching requirements of the next robot generation , 2008, 2008 IEEE International Conference on Robotics and Automation.

[17]  Antonio Bicchi,et al.  Fast and "soft-arm" tactics [robot arm design] , 2004, IEEE Robotics & Automation Magazine.

[18]  H. Sira-Ramírez.  A geometric approach to pulse-width modulated control in nonlinear dynamical systems , 1989 .

[19]  Blake Hannaford,et al.  Fatigue characteristics of McKibben artificial muscle actuators , 1998, Proceedings. 1998 IEEE/RSJ International Conference on Intelligent Robots and Systems. Innovations in Theory, Practice and Applications (Cat. No.98CH36190).

[20]  Darwin G. Caldwell,et al.  Braid Effects on Contractile Range and Friction Modeling in Pneumatic Muscle Actuators , 2006, Int. J. Robotics Res..

[21]  Blake Hannaford,et al.  Measurement and modeling of McKibben pneumatic artificial muscles , 1996, IEEE Trans. Robotics Autom..

[22]  Liu Fu-cheng.  Research on Attitude Maneuver Control of Large-Scale Satellite Based on Variable Structure Control System with Sliding Mode , 2011 .

[23]  Bram Vanderborght,et al.  Proxy-based Sliding Mode Control of a Planar Pneumatic Manipulator , 2009, Int. J. Robotics Res..

[24]  R. Quinn,et al.  Modeling of braided pneumatic actuators for robotic control , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).