Composite titanate cathode enhanced with in situ grown nickel nanocatalyst for direct steam electrolysis

This paper investigates the reversible exsolution of a Ni nanocatalyst anchored on the surface of La0.3Sr0.7TiO3−δ (LSTO) for enhancing the electrocatalytic activity of the composite cathode. The metallic Ni nanoparticles significantly enhance the electrode performance and elevate the current efficiency of the electrode in high-temperature steam electrolysis. The combination of XRD, SEM, EDS and XPS results confirms that the exsolution and dissolution of the Ni nanoparticles are completely reversible in redox cycles. The electrical conductivities of the Ni-loaded samples accordingly improved as well. The synergetic effects of the Ni nanocatalyst and redox-stable titanate contribute to the excellent stability and improved performance for direct steam electrolysis. The current efficiencies with Ni-anchored LSTO can be accordingly enhanced by 20% in contrast to the bare cathode with or without reducing gas flowing over the cathode under the applied voltage of 2.0 V at 800 °C.

[1]  Dragos Neagu,et al.  In situ growth of nanoparticles through control of non-stoichiometry. , 2013, Nature chemistry.

[2]  Yucheng Wu,et al.  Composite cathode based on Ni-loaded La0.75Sr0.25Cr0.5Mn0.5O3−δ for direct steam electrolysis in an oxide-ion-conducting solid oxide electrolyzer , 2013 .

[3]  G. Tsekouras,et al.  Step-change in high temperature steam electrolysis performance of perovskite oxide cathodes with exsolution of B-site dopants , 2013 .

[4]  Shaofeng Li,et al.  NH3BH3/LiBH4·NH3 modified by metal hydrides for advanced dehydrogenation , 2012 .

[5]  G. Meng,et al.  Electrolysis of H2O and CO2 in an oxygen-ion conducting solid oxide electrolyzer with a La0.2Sr0.8TiO3+δ composite cathode , 2012 .

[6]  D. Dong,et al.  Composite fuel electrode La(0.2)Sr(0.8)TiO(3-δ)-Ce(0.8)Sm(0.2)O(2-δ) for electrolysis of CO2 in an oxygen-ion conducting solid oxide electrolyser. , 2012, Physical chemistry chemical physics : PCCP.

[7]  Yan Han,et al.  Deactivation of anode catalyst La0.75Sr0.25Cr0.5Mn0.5O3±δ in SOFC with fuel containing hydrogen sulfur: The role of lattice oxygen , 2012 .

[8]  James E. O'Brien,et al.  Thermodynamics and Transport Phenomena in High Temperature Steam Electrolysis Cells , 2012 .

[9]  Yalin Lu,et al.  Novel Ni–Ba1+xZr0.3Ce0.5Y0.2O3−δ hydrogen electrodes as effective reduction barriers for reversible solid oxide cells based on doped ceria electrolyte thin film , 2012 .

[10]  Florence Lefebvre-Joud,et al.  High Temperature Steam Electrolysis Stack with Enhanced Performance and Durability , 2012 .

[11]  J. Kilner,et al.  Electrolyte degradation in anode supported microtubular yttria stabilized zirconia-based solid oxide , 2011 .

[12]  Chenghao Yang,et al.  Characteristics of the Hydrogen Electrode in High Temperature Steam Electrolysis Process , 2011 .

[13]  Kui Xie,et al.  Direct synthesis of methane from CO2/H2O in an oxygen-ion conducting solid oxide electrolyser , 2011 .

[14]  E. Torres-Moye,et al.  Symmetry breaking and electrical conductivity of La0.7Sr0.3Cr0.4Mn0.6O3−δ perovskite as SOFC anode material , 2011 .

[15]  S. McIntosh,et al.  Insights Into the Fuel Oxidation Mechanism of La0.75Sr0.25Cr0.5Mn0.5O3 − δ SOFC Anodes , 2010 .

[16]  Asif Ansar,et al.  High temperature water electrolysis using metal supported solid oxide electrolyser cells (SOEC) , 2009 .

[17]  J. Irvine,et al.  La0.75Sr0.25)0.95Mn0.5Cr0.5O3 as the cathode of solid oxide electrolysis cells for high temperature hydrogen production from steam , 2008 .

[18]  D. Leung,et al.  Technological development of hydrogen production by solid oxide electrolyzer cell (SOEC) , 2008 .

[19]  Y. Yun,et al.  Performance of Ni/YSZ cermet cathode prepared by mechanical alloying for high temperature electrolysis of water vapor (steam): effect of anode and cathode thicknesses on the efficiency of hydrogen production , 2008 .

[20]  J. Grabis,et al.  Raman scattering in nanosized nickel oxide NiO , 2007 .

[21]  J. Vohs,et al.  A Support Layer for Solid Oxide Fuel Cells , 2007 .

[22]  Dennis Y.C. Leung,et al.  An Electrochemical Model of a Solid Oxide Steam Electrolyzer for Hydrogen Production , 2006 .

[23]  M. Mogensen,et al.  A study on the structural and electrical properties of lanthanum-doped strontium titanate prepared in air , 2005 .

[24]  F. Tietz,et al.  Chromite/titanate based perovskites for application as anodes in solid oxide fuel cells , 2000 .