Deterministic matrix-based radiative design using a new general formulation of exergy and exergy efficiency for hybrid solar collectors

Abstract This paper provides two main contributions: a new general formulation of radiation exergy and exergy efficiency of photovoltaic (PV) panels as grey surface absorbers; the development of an analytic method of radiative design of hybrid solar collectors by using matrix formalism. The new proposed GS (Gray Surface) model of exergy efficiency applicable for gray surfaces is proposed and compared with the classical models (in the first case study) and with its value of 0.939 reveals a difference of up to 1% compared with Petela-Landsberg-Press model (0.932) or Jeter-Carnot model (0.949). The new methodology is able to determine the thermal radiation losses through the lateral walls. The second case study includes an estimation of these losses at 2.63% for the analyzed design. A sensitivity analysis of thickness vs. exergy efficiency is performed, showing that each increase of the thickness of the collector by 10 mm determines a decrease of the extracted power (work) by 1.6% while the radiative exergy efficiency decreases by 0.75%. By including, in future research, the effect of the convection heat transfer, the proposed methodology could stand as a theoretical reference that can be compared with other two paths of research: numerical (CFD) and empirical.

[1]  D. C. Spanner,et al.  Introduction to Thermodynamics , 1964 .

[2]  Ha Herbert Zondag,et al.  The yield of different combined PV-thermal collector designs , 2003 .

[3]  Gouy.  Sur l'énergie utilisable , 1889 .

[4]  J. Singh,et al.  On the thermodynamic efficiency of solar energy converters: Solar cells , 1986 .

[5]  E. Skoplaki,et al.  A simple correlation for the operating temperature of photovoltaic modules of arbitrary mounting , 2008 .

[6]  R. A. Gaggioli,et al.  The concepts of thermodynamic friction, thermal available energy, chemical available energy and thermal energy , 1962 .

[7]  R. Petela.  Exergy of Heat Radiation , 1964 .

[8]  W. Press,et al.  Theoretical maximum for energy from direct and diffuse sunlight , 1976, Nature.

[9]  J. E. Parrott,et al.  Theoretical upper limit to the conversion efficiency of solar energy , 1978 .

[10]  Said Farahat,et al.  Exergy performance analysis of solar photovoltaic thermal (PV/T) air collectors in terms of exergy losses , 2011 .

[11]  Amir Vadiee,et al.  Exergy and Economic Evaluation of a Commercially Available PV/T Collector for Different Climates in Iran , 2015 .

[12]  E. Skoplaki,et al.  Operating temperature of photovoltaic modules: A survey of pertinent correlations , 2009 .

[13]  Gilles Notton,et al.  Modelling of a double-glass photovoltaic module using finite differences , 2005 .

[14]  Said Farahat,et al.  Exergetic optimization of a solar photovoltaic thermal (PV/T) air collector , 2011 .

[15]  Kamaruzzaman Sopian,et al.  Outdoor Performance Analysis of a Photovoltaic Thermal (PVT) Collector with Jet Impingement and Compound Parabolic Concentrator (CPC) , 2017, Materials.

[16]  A. Bejan.  Advanced Engineering Thermodynamics , 1988 .

[17]  V. Badescu.  Optimal control of flow in solar collectors for maximum exergy extraction , 2007 .

[18]  Yangang Liu,et al.  Radiation entropy flux and entropy production of the Earth system , 2010 .

[19]  Rainer Eckstein,et al.  Entropy Generation During the Interaction of Thermal Radiation with a Surface , 2012, Entropy.

[21]  S. Jeter.  Maximum conversion efficiency for the utilization of direct solar radiation , 1981 .

[22]  Said Farahat,et al.  Exergy efficiency of a solar photovoltaic array based on exergy destructions , 2010 .

[23]  Herbert W. Hevert,et al.  Second law analysis: An alternative indicator of system efficiency , 1980 .

[24]  Arvind Tiwari,et al.  Performance evaluation of solar PV/T system: An experimental validation , 2006 .

[25]  Viorel Badescu.  How much work can be extracted from a radiation reservoir , 2014 .

[26]  R. B. Evans,et al.  A PROOF THAT ESSERGY IS THE ONLY CONSISTENT MEASURE OF POTENTIAL WORK (FOR CHEMICAL SYSTEMS) , 1969 .

[27]  A. Tiwari,et al.  Performance evaluation of hybrid PV/thermal water/air heating system: A parametric study , 2006 .

[28]  Jon Hand,et al.  Building-integrated photovoltaic and thermal applications in a subtropical hotel building , 2003 .

[29]  S. R. Shamshirgaran,et al.  Upper limits for the work extraction by nanofluid-filled selective flat-plate solar collectors , 2018, Energy.

[30]  Arvind Tiwari,et al.  Energy and exergy efficiencies of a hybrid photovoltaic–thermal (PV/T) air collector , 2007 .

[31]  A. Barnett,et al.  The spectral p-n junction model for tandem solar-cell design , 1987, IEEE Transactions on Electron Devices.

[32]  Bharath Seshadri,et al.  Temperature Dependent Photovoltaic (PV) Efficiency and Its Effect on PV Production in the World – A Review☆ , 2013 .

[33]  N. Ravindra,et al.  Temperature dependence of solar cell performance—an analysis , 2012 .

[34]  Helmut Müser.  Thermodynamische Behandlung von Elektronenprozessen in Halbleiter-Randschichten , 1957 .

[35]  Enrico Sciubba,et al.  Modeling and simulation of a hybrid PV/Thermal collector , 2011 .

[36]  Juan C. Chimal-Eguia,et al.  A Finite-Time Thermal Cycle Variational Optimization with a Stefan-Boltzmann Law for Three Different Criteria , 2012, Entropy.

[37]  Sadi Carnot,et al.  Reflections on the Motive Power of Heat , 2009 .

[38]  Kamaruzzaman Sopian,et al.  Performance of four air-based photovoltaic thermal collectors configurations with bifacial solar cells , 2017 .

[39]  Viorel Badescu,et al.  ACCURATE UPPER BOUND EFFICIENCY FOR SOLAR THERMAL POWER GENERATION , 2000 .

[40]  F. Curzon,et al.  Efficiency of a Carnot engine at maximum power output , 1975 .

[41]  Ewa Radziemska,et al.  Performance Analysis of a Photovoltaic-Thermal Integrated System , 2009 .

[42]  J. Parrott,et al.  A thermodynamic cycle for photovoltaic energy conversion , 1990 .

[43]  M. Rosen,et al.  Performance evaluation of a double pass PV/T solar air heater with and without fins , 2011 .

[44]  Ibrahim Dincer,et al.  Thermodynamic assessment of photovoltaic systems , 2009 .

[45]  A. Bejan,et al.  Entropy Generation Through Heat and Fluid Flow , 1983 .

[46]  D. L. Evans,et al.  Cost studies on terrestrial photovoltaic power systems with sunlight concentration , 1977 .

[47]  V. Badescu.  Accurate upper bound for the efficiency of converting solar energy into work , 1998 .

[48]  P. I. Moynihan.  Example of Second-Law Efficiency of Solar-Thermal Cavity Receivers , 1986 .

[49]  I. Dincer,et al.  A holistic approach to thermodynamic analysis of photo-thermo-electrical processes in a photovoltaic cell , 2016 .

[50]  E. Skoplaki,et al.  ON THE TEMPERATURE DEPENDENCE OF PHOTOVOLTAIC MODULE ELECTRICAL PERFORMANCE: A REVIEW OF EFFICIENCY/ POWER CORRELATIONS , 2009 .