Surface Functionalization of Thermoplastic Polymers for the Fabrication of Microfluidic Devices by Photoinitiated Grafting

Photografting has been used for the surface modification of a wide range of commercial commodity polymers such as poly- styrene, poly(methyl methacrylate), poly(dimethyl siloxane), polycarbonate, Parylene C, polypropylene, cyclic olefin copolymer, and hydrogenated polystyrene that are useful substrate materials for the fabrication of microfluidic chips. Since the chain propagation is initiated after UV light-activated abstraction of a hydrogen atom from the surface of channels within the materials, their permeability for UV light was tested and polyolefins were found to be the best candidates. A number of monomers with a variety of functional groups such as perfluorinated, hydrophobic, hydrophilic, reactive, acidic, basic, and zwitterionic have been successfully grafted from the surface of selected substrates, and the grafting efficiency determined using X-ray photoemission spectroscopy. Layered surface structures were prepared by consecutive grafting of different monomers. Our approach also enables photolithographic patterning of surfaces and specific functionalization of confined areas within the microchannel.

[1]  H. Kubota,et al.  Comparative examination of acrylic acid and 4-vinylpyridine monomers in liquid-phase photografting on polyethylene film , 1994 .

[2]  T. Rohr,et al.  Porous polymer monoliths: Simple and efficient mixers prepared by direct polymerization in the channels of microfluidic chips , 2001, Electrophoresis.

[3]  K. L. Tan,et al.  Surface Modification of Low-Density Polyethylene Films by UV-Induced Graft Copolymerization and Its Relevance to Photolamination , 1998 .

[4]  Robert H. Davis,et al.  A Novel Sequential Photoinduced Living Graft Polymerization , 2000 .

[5]  C. Decker,et al.  Surface modification of polyolefins by photografting of acrylic monomers , 1998 .

[6]  B. Rånby.  Surface modification and lamination of polymers by photografting , 1999 .

[7]  J. L. Garnett,et al.  Significance of grafting in curing processes initiated by UV, excimer and ionising radiation sources , 2000 .

[8]  H. Kubota,et al.  Photografting of methacrylic acid on polyethylene film: Effect of mixed solvents consisting of water and organic solvent , 2002 .

[9]  G. Whitesides,et al.  Microfabrication, Microstructures and Microsystems , 1998 .

[10]  F. Švec,et al.  Monolithic porous polymer for on-chip solid-phase extraction and preconcentration prepared by photoinitiated in situ polymerization within a microfluidic device. , 2001, Analytical chemistry.

[11]  J. J. Yu,et al.  Ultraviolet‐initiated photografting of glycidyl methacrylate onto styrene–butadiene rubber , 1999 .

[12]  Wantai Yang,et al.  Bulk surface photografting process and its applications. I. Reactions and kinetics , 1996 .

[13]  C Gärtner,et al.  Polymer microfabrication methods for microfluidic analytical applications , 2000, Electrophoresis.

[14]  T. Pinkerton,et al.  Characterization of internal surface reversed-phase silica supports for liquid chromatography. , 1985, Journal of chromatography.

[15]  W. T. Yang,et al.  The role of far UV radiation in the photografting process , 1996 .

[16]  H. Kubota,et al.  Introduction of stimuli-responsive polymers into regenerated cellulose film by means of photografting , 2001 .

[17]  Wantai Yang,et al.  Self‐initiating performance of maleic anhydride on surface photografting polymerization , 2001 .

[18]  Wantai Yang,et al.  Auto‐Initiating Performance of Styrene on Surface Photografting Polymerization , 2001 .

[19]  H. Kubota,et al.  Characteristics of acrylic acid and N‐isopropylacrylamide binary monomers–grafted polyethylene film synthesized by photografting , 1998 .

[20]  G. Oster,et al.  Graft copolymer of polyacrylamide and natural rubber produced by means of ultraviolet light , 1957 .

[21]  A. Berg,et al.  Micro Total Analysis Systems: Microfluidic Aspects, Integration Concept and Applications , 1997 .

[22]  B. Rånby.  Surface modification of polymers by photoinitiated graft polymerization , 1992 .

[23]  G. Geuskens,et al.  Surface modification of polymers - IV. Grafting of acrylamide via an unexpected mechanism using a water soluble photo-initiator , 1996 .

[24]  G. Somorjai,et al.  An ultraviolet-Raman spectroscopic investigation of magnesium chloride-ethanol solids with a 0.47 to 6 molar ratio of C2H5OH to MgCl2 , 2002 .

[25]  B. Rånby,et al.  Surface photografting of polymer fibers, films and sheets , 1999 .

[26]  Y. Ikada,et al.  Surface modification of polymers by grafting , 1998 .

[27]  J. Haginaka.  Drug determination in serum by liquid chromatography with restricted access stationary phases , 1991 .

[28]  Wantai Yang,et al.  Bulk surface photografting process and its applications. II. Principal factors affecting surface photografting , 1996 .

[29]  Frédéric Reymond,et al.  Polymer microfluidic chips for electrochemical and biochemical analyses , 2002, Electrophoresis.